Eglo ceiling fans, bathroom heaters and lighting
Eglo is a European lighting brand that sells ceiling fans, bathroom heater and exhaust fan lights, and indoor and outdoor lighting in Australia. The ceiling fans are the largest group, and most of them use a quiet DC motor with a remote and six speeds. The bathroom units combine heat, light and extraction in one fitting, and the lighting runs from vanity lights and pendants to weatherproof outdoor wall lights.
People search for the brand as Eglo, Eglo fans, Eglo ceiling fans and Eglo lighting. This page explains what each group covers, the sizes and ratings that decide whether a fitting suits a room, and how to choose between the ranges.
Ceiling fans
Eglo names its fans after Australian beaches, and the names help to tell them apart. Some are for indoor use only, some suit a covered outdoor area, and one is weatherproof for a patio exposed to rain.
| Range | Motor and size | Where it suits |
|---|---|---|
| Surf | 40W DC, 48 inch, 3 blades, 6 speeds, 13,130 cubic metres an hour | Indoors or a covered outdoor area, with ABS blades and housing |
| Miami | DC, 60 inch, 6 speeds, 16,412 cubic metres an hour, with an LED light | Coastal homes, with UV-resistant ABS for salt air |
| Noosa | DC, 40, 46, 52 and 60 inch, 6 speeds, with or without an LED light | Indoors or an enclosed area, with ABS blades |
| Iluka | DC, 52 inch, 132cm, low profile, 18W LED with colour temperature choice | A low ceiling in a home or apartment |
| Seacliff | 28W DC, 52 inch, 3 blades, 258mm drop, 11,895 cubic metres an hour | A flat, low ceiling, with an optional LED light |
| Stradbroke | 28W DC, 48 and 52 inch, 4 blades, 318mm drop | An indoor room that wants a steel-bodied fan |
| Bondi | 56W AC, 48 inch, 4 blades, 3 speeds | Indoors or a covered outdoor area |
| Cabarita | 35W DC, 50 inch, 3 blades, 6 speeds | An indoor room that wants a steel body |
| Kurrawa | 40W DC, 60 inch, IP55 | A patio or an outdoor area exposed to rain |
| Currumbin | 42W DC, 80 inch, 203cm, Merbau timber blades | A large indoor room that wants real timber |
| Waikiki | AC, 52 inch, pull cord and wall switch, steel and plywood | A traditional or Hamptons room |
The Waikiki can be fitted with a separate remote kit and light kit. Most of the others come with a remote. A 40 degree angle canopy is sold separately for a sloping ceiling, and an extension rod suits a high ceiling. The wider range of fans is in ceiling fans.
Choosing a fan
Start with the room. A fan should be sized to the floor, and the diameter is the number that matters most. A 40 to 46 inch fan suits a small room or a study, a 52 inch fan suits a bedroom or a living room, and a 60 inch fan or larger suits a big open room or a patio. A very large room, or a space with a high ceiling, can take an 80 inch fan such as the Currumbin.
Then check the ceiling. A fan needs clearance below the blades, so the drop is the number to check against the room height. The Seacliff drops 258mm and has a 189mm canopy, so it suits a low, flat ceiling, and it must be installed on a flat, level surface. The Stradbroke drops 318mm, and the Surf 297mm. For a high ceiling, an extension rod lowers the fan to a more useful height. For a sloping ceiling, check the maximum canopy pitch: the Noosa and Iluka allow a slight pitch, the Surf allows 20 degrees, and the Miami can take up to 38 degrees with the angle canopy.
| Question | Check |
|---|---|
| How big is the room? | The fan diameter, from 40 to 80 inches |
| How low is the ceiling? | The drop and the canopy height |
| Is the ceiling sloped? | The maximum canopy pitch, and whether an angle canopy is sold separately |
| Is it indoors or outdoors? | The usage line: indoor, covered outdoor, or weatherproof |
| Do you want a light? | A built-in LED, or a separate light kit |
DC or AC
A DC motor uses less power and runs more quietly than an AC motor, and it usually has more speeds. Most Eglo fans are DC, with six speeds, a remote, a reverse function and often a night mode. The Surf, for example, draws 40W, and the Seacliff and Stradbroke draw 28W. The Bondi and the Waikiki use AC motors. They are simpler, and they suit a room where a pull cord or a wall switch is wanted. The reverse function runs the fan backwards in winter, so it pushes warm air down from the ceiling.
3-in-1 bathroom heaters
The Eglo bathroom units combine an infrared heater, an LED light and an exhaust fan in one fitting. They are sized by the air they move and the heat they give, so match the unit to the size of the bathroom. A bathroom needs about 15 air changes an hour and a WC about 10, and the unit's extraction should clear the volume of the room at that rate.
| Unit | Heat | Extraction | Size and cutout |
|---|---|---|---|
| Vesuvius 2 and 4 | Infrared, 2 or 4 lamps of 275W | 260 cubic metres an hour, 25W motor | 440 by 280 by 241mm, cutout 390 by 220mm |
| Heatflow 2 and 4 | Infrared, 2 or 4 lamps of 275W | 460 cubic metres an hour, 40W motor | 480 by 290 by 260mm, cutout 430 by 250mm |
| Inferno 4 | A 1000W halogen heat lamp | 550 cubic metres an hour, 55W motor | 500 by 350 by 213mm, cutout 470 by 315mm |
The Vesuvius suits a small bathroom, the Heatflow a small to medium bathroom, and the Inferno a larger one. All three need a minimum cavity height of 250mm and come with a wall control, and the lights are dimmable. A replacement 275W heat lamp bulb is sold separately for the Vesuvius and Heatflow. A licensed electrician must install the fitting, and the cutout must be made to size in the ceiling. See Eglo bathroom heating, 3-in-1 bathroom heater lights and bathroom exhaust fans.
Lighting
The lighting runs from vanity lights to outdoor wall lights and pendants. The IP rating is the number to check for a wet area: IP44 is protected against splashing, which suits the area around a vanity, and IP65 is protected against jets of water, which suits an outdoor wall.
| Light | Size and rating | Where it suits |
|---|---|---|
| Pandella vanity wall light | 14W, 1200mm long, 1700 lumens, IP44; or 11W, 600mm long, 1350 lumens | Above a vanity mirror |
| Palmera wall light | 4.5W or 2 x 4.5W LED, 3000K, IP44, 435mm shade | Beside a mirror, with an art deco look |
| Passa wall light | 2 x 5W GU10, 170mm shade, dual beam, IP20 | A hall or a bedroom wall |
| Fremantle outdoor wall light | Aluminium, 2 x GU10, IP65 | An outdoor wall, up and down |
| Tavistock pendant | E27, 2000mm suspension, oak or matte black | Over a bench or a table |
| Sabinar pendant | E27, 280mm wide, 350mm shade, 2000mm suspension | A living or dining room |
| Oilella pendant | E27 globe sold separately, 2m lead, vapourised glass | A bench or a bedside |
Vanity lights are best placed on each side of a mirror or above it, so the light falls on the face and not from above. A pendant needs a globe, and the Tavistock and Oilella are sold without one, so choose the globe separately. Check the colour temperature as well as the brightness: 3000K is a warm white for a living room, and 4000K is a neutral white for a vanity or a kitchen. The lighting is in Eglo lighting, with wall lights and pendant lights from other makers.
Fans for coastal and outdoor areas
Salt air and rain attack a ceiling fan faster than anything else in a home, so the usage line and the materials matter. The Miami has UV-resistant ABS blades and a housing made for coastal homes. The Surf has non-rust ABS blades and a housing that suit a covered outdoor area, and the Bondi has all-ABS construction. The Kurrawa carries an IP55 rating, which means it is protected against dust and against water jets, so it suits a patio that is open to the weather, including tropical areas where the rain blows sideways.
A fan that is only suited to indoor use, such as the steel-bodied Stradbroke and Cabarita, should stay inside. Do not mount an indoor fan on a verandah, even a covered one, because humidity and salt air will corrode the motor and the fixings over time. Where a fan sits in an enclosed alfresco room, choose one whose usage line names it, and keep the blades clean so salt and dust do not build up.
Planning a room
Choose the fan or the heater first, because it sets the ceiling plan. Check the cavity and the cutout before any bathroom unit is ordered, and confirm the ceiling height before a fan is chosen. Then choose the lights to suit the room: warm white in living areas, neutral white over a vanity, and a weatherproof light outside. Keep one finish across the fan, the light and the switch plate if you can.
Fitting and care
A licensed electrician must install every fan, heater and light. Fix a ceiling fan to a rated mounting point, and check the weight, which runs from about 5.6kg for a 52 inch Iluka to 9.2kg for the 80 inch Currumbin. Wipe fan blades and shades with a soft, dry cloth, and a barely damp cloth for stains. Do not use abrasive cleaners on a finish. For a bathroom unit, clean the grille and the lamp cover regularly, and let the lamps cool before a bulb is changed.
Before you order
Measure the room and the ceiling height, and match the fan diameter and the drop to them. Choose a DC fan for quiet, efficient running, and an AC fan if you want a pull cord. Check that the usage line suits the place: indoor, covered outdoor or weatherproof. For a bathroom unit, check the extraction, the cutout and the cavity height. For a light, check the IP rating and the globe.


