Chrome heated towel rails buying guide
A chrome heated towel rail is a dry electric rail with a bright chrome finish, and it suits a bathroom where the tapware, the shower and the basin mixer are already chrome. For most bathrooms the right call is to choose the power type and the shape first, then the finish. A ladder suits a family bathroom, a single bar suits a narrow or low wall, and some chrome rails can be plugged in while others are hardwired only. This guide sets out the chrome rails in this collection with their real specifications.
Plug-in or hardwired
Whether a rail can be plugged in decides who installs it and where the cable has to reach. Check this first.
| Chrome rail | Plug-in or hardwired |
|---|---|
| Phoenix Cromford, Radii and Five Flat Bar ladders (240V) | Hardwired or plugged in, with the cable through the bottom right vertical tube |
| Thermogroup 3 Bar ladder (240V) | Multiflex wiring, hardwired or plugged in |
| Nero Mecca ladder and singles (240V) | Concealed hardwired wiring, with a 1.5 metre power cord |
| Fienza Kaya ladders | Concealed hardwired only |
| Phoenix round, square and triple rails (12V) | Hardwired only, by a licensed electrician |
A rail that is hardwired needs an electrician. A rail that plugs in needs a power point within reach of the lead. The 240V heated towel rails collection holds mains-powered rails from every brand, and the 12 volt heated towel rails collection holds the transformer-powered ones.
The chrome rails in this collection
| Rail | Size | Power and rating |
|---|---|---|
| Thermogroup 3 Bar ladder | 550mm wide, 450mm high | 240V, 33 watts, IP55 |
| Fienza Kaya 4 bar | 600mm by 450mm, 100mm deep | 230V, 47.5 watts, IP55 |
| Phoenix Cromford | 550mm wide | 240V, 62 watts, IPX5 |
| Phoenix Five Flat Bar | 550mm by 740mm | 240V, 35 watts, IPX4 |
| Phoenix Radii | 550mm by 738mm, and 750mm by 740mm | 240V, 62 watts, IPX5 |
| Fienza Kaya 6 bar, and Fienza Lillian 6 bar | 600mm by 800mm | 75 watts, IP55 |
| Nero Mecca 7 bar | 600mm by 800mm, 122mm deep | 240V, 80 watts, IP55 |
| Fienza Kaya 9 bar | 600mm by 1200mm, 100mm deep | 230V, 110 watts, IP55 |
| Nero Mecca and Bianca singles | 632mm long | 240V, 15 watts, IP55 |
| Phoenix round and square rails | 600mm and 800mm, vertical or horizontal | 12V, 35 watts, IPX5 |
| Turner Hastings Mayer, liquid-filled | 628mm by 831mm, 5 bars | 240V, 300 watts, IP44 |
A ladder gives a towel more contact with the heated bars than a single bar does, so it dries and warms a towel better. A single bar has less surface contact, so use one bar per towel and fit two or three side by side if more towels hang at once. More bars means more hanging space, but output does not rise in step with the bar count: the Phoenix Five Flat Bar draws 35 watts and the Cromford draws 62.
Chrome over stainless steel
The chrome on these rails is a surface finish over stainless steel. The Phoenix chrome rails are chrome plated, and the Turner Hastings Mayer is chrome plated 304 stainless steel. The Thermogroup 3 Bar chrome ladder is 201 grade stainless steel. Because the chrome is a surface layer, clean it with a soft cloth and a non-abrasive cleaner, because harsh scrubbing and acid cleaners mark the surface.
The liquid-filled Mayer
The Turner Hastings Mayer is a liquid-filled ladder. It has a 300 watt replaceable immersion element, and the rail is filled with a mixture of water and glycol. It heats to approximately 55 degrees and takes 15 to 30 minutes to heat up. It has no switch on the rail, so it needs a control panel timer or a switch in the bathroom, such as one beside the light switch. The liquid filled heated towel rails collection holds it.
How hot a chrome rail gets
The Fienza Kaya ladders run between 35 and 60 degrees. A heated towel rail is not a radiator, so a bathroom that needs warm air also needs a ceiling heater or underfloor heating, which the bathroom heating and ventilation collection covers. The rail dries a towel and keeps it warm.
Wiring and fixing
- The Nero Mecca ladder can be surface mounted or recessed, the power cable can connect from the left or the right, and the wiring position is at the top or bottom mounting position. The fixing distance is 568mm across and 600mm down.
- The Phoenix 12V rails have an integrated on and off switch, with the cable leaving through the bottom mount and a 1.3 metre lead. The transformer is in the box.
- The Fienza Kaya wiring is concealed, at the top right or the bottom left mounting point.
- The Thermogroup 3 Bar has a connection on the left and the right, and it can mount either way up.
Have a qualified electrician install and test the rail. For a Thermogroup ladder, mount it on a flat wall at least 600mm above the floor, with 300mm clear of permanent fixtures. Screw into studs where possible, use anchors on a hollow wall, and protect the rail with a suitably rated RCD circuit.
What a chrome rail uses
Divide the rail's wattage by 1,000, then multiply by the hours it runs. A 15 watt single bar running six hours a day uses 0.09 kilowatt-hours. A 62 watt Phoenix ladder uses 0.37, an 80 watt Nero ladder uses 0.48, and the 300 watt Mayer uses 1.8. Left on for 24 hours the 80 watt ladder uses 1.92 kilowatt-hours, four times as much. A rail should not run constantly, because heat builds up under the towel. A timer keeps the running hours to the ones that count, and the controllers and thermostats and Thermogroup timers and thermostats collections hold timers that match the rail.
Which chrome rail suits which wall
- A small space or one towel: the Thermogroup 3 Bar at 550mm by 450mm, or the Fienza Kaya 4 bar at 600mm by 450mm.
- A standard bathroom wall: a 6 or 7 bar ladder at 600mm by 800mm, from Fienza or Nero.
- A wall that can take a ladder around 750mm high: the Phoenix Radii at 750mm by 740mm.
- A tall wall in a shared bathroom: the Fienza Kaya 9 bar at 600mm by 1200mm.
- A narrow or low wall: a 600mm or 800mm Phoenix round or square rail, or a 632mm Nero single bar.
- A bathroom where the towel must warm quickly: the liquid-filled Mayer, which heats in 15 to 30 minutes.
The Phoenix chrome ladders
The Phoenix ladders are designed in Australia and share a plug-in option. The Cromford is a 550mm ladder at 62 watts, with a plain design that suits a farmhouse or an industrial bathroom. The Radii has wide, flat surfaces with round or square shapes, and its 750mm size comes with both a square and a round backplate. The Five Flat Bar is a 550mm by 740mm ladder with flat bars at 35 watts. All three can be hardwired or plugged in, and the cable leaves through the bottom right vertical tube, with a lead of 1.3 or 1.4 metres. The Cromford and Radii are IPX5, and the Five Flat Bar is IPX4.
The Phoenix 12V chrome rails
The Phoenix round and square rails are 12V and hardwired only. Each has an integrated on and off switch on the rail, and mounts vertically or horizontally. The transformer is in the box, and the triple versions put three rails in one box. A matching vertical rail hook lets one vertical rail carry two towels. The 800mm round is 38mm wide, 870mm high and 82mm deep.
The Fienza Kaya
The Fienza Kaya is a round bar ladder in 4, 6 and 9 bars at 600mm wide, with a surface temperature between 35 and 60 degrees. The wiring is concealed and hardwired, at the top right or the bottom left mounting position. The Fienza Lillian is a 6 bar rail at 600mm by 800mm and 93mm deep, 75 watts and IP55, with concealed wiring at the bottom right or bottom left.
Timers and switching
Phoenix 12V rails have an integrated switch on the rail. The 240V ladders need a wall switch or a timer, so decide where it will sit before the wiring is planned. The Thermogroup Eco Timer sits behind the switch plate and runs a 12-hour schedule, for 1 to 11 hours at 50, 75 or 100 per cent heat. The TRTS touchscreen timers set two heating periods a day across seven days, with a manual override.
Sizing the rail to the wall
Measure the wall before the rail. Overall size is the footprint on the wall, and the fixing distance is the distance between the mounts. They are different numbers. Set out the holes from the fixing distance, and leave clear wall above and below the rail so air moves around the towels. For one towel in a small space, a 4 bar rail around 600mm by 450mm suits. For a standard wall, a 7 bar ladder is the usual choice, and for a tall wall the nine bar Kaya is 1200mm high.
Other finishes
If the tapware is not chrome, the stainless steel, brushed nickel, black, gunmetal, brass and gold and white collections hold the other finishes. The heated towel rails collection compares every finish, size and voltage together.
Care
A rail is hot to the touch, so supervise young children near it. Do not hang anything on the rail that has been in contact with oil, petroleum products or dry cleaning fluids.

