What stainless steel means in a shower
Stainless steel is a base metal, not a colour. It resists rust because of the chromium in the alloy, and that is why it is the material chosen for showers that live outdoors, near the sea or in a wet room that is rarely dry. This collection holds shower products made from it: roses, arms, a hand shower, a rail set, a twin set and a floor drain, from Phoenix, Meir and Caroma. The range is short, because stainless steel answers a specific problem, and a short list is easier to choose from.
Stainless steel is rust-resistant with anti-corrosion properties that suit indoor and outdoor use. Which grade you choose matters, because the two grades behave differently near salt. The rest of this page deals with that, then with finish, care and the items themselves. If you want the colour-led view, see chrome showers or brushed nickel showers. The full range sits in showers.
304 or 316 stainless steel
The two common grades are 304 and 316. Both are stainless steel, and the difference is that 316 contains molybdenum, which improves its resistance to chlorides, the salts found in sea air and in pools. That is why 316 is called marine grade.
Choose the grade by environment. In a clean inland setting, 304 is suitable and wants washing every 3 to 6 months, and 316 every 6 to 12 months. In a polluted urban or industrial setting, choose 316 and wash it every 6 to 12 months. In a coastal or marine setting, choose 316 and wash it every 3 to 6 months. Use a minimum of 316 marine grade stainless steel in any high-corrosion or coastal environment.
Where each grade fits in this range
The Caroma Titan arms are 304 grade stainless steel, and they suit an indoor bathroom, a covered area or a home away from salt air. For a place that gets sea spray, take the 316 items from Phoenix and Meir. If you are unsure, choose a 316 item.
Tea staining: what it is and whether it matters
Tea staining is a brown discolouration that can appear on stainless steel, and it often worries buyers who see it for the first time. It is a discolouration of the surface caused by mild corrosion. It is cosmetic only and does not affect the strength or the life of the product. Wind exposure, pollution, higher temperatures and salt deposits make it more likely, and regular washing reduces it.
Prevention has three parts: choose the right grade for the place, choose the smoothest practical finish, and wash the product regularly so that salt and residue do not sit on the surface. Occasional rain is enough in many outdoor applications. If staining does appear, a phosphoric acid gel left for 15 to 30 minutes on stubborn stains, then washed off with gloves and safety glasses, removes it. For persistent staining, contact a stainless steel finisher. Check the maker's instructions before using any acid on a coated or PVD item.
Brushed or smooth: the finish trade-off
Most stainless steel showers are brushed. The brushed finish conceals fingerprints and watermarks, softens reflections and is easier to keep looking clean than polished finishes such as chrome. The brush lines scatter light, so marks are less visible.
What is in the collection
Phoenix Vivid Slimline SS
The Vivid Slimline SS range is the largest group. It is an evolution of the Vivid Slimline range, with a slender profile and an extended pin lever, in 316 marine grade stainless steel for outdoor kitchens, laundries and coastal homes. The shower arm and 250 mm round rose is rated 3 star at 9 litres per minute, and the box lists the rose and the arm. The rail set is rated 3 star at 8 litres per minute, with an overall height of 800 mm and a fixing distance of 670 mm, and it fits an existing half inch water inlet. The twin shower has an overhead and a single-function handpiece with a top inlet rotary diverter, an adjustable bottom pillar and a fixing distance of 500 mm, and its overhead is rated 3 star at 8 litres per minute. There is also a microphone-style hand shower that fits existing half inch plumbing with drill-free installation, rated 3 star at 8.5 litres per minute.
Meir Outdoor 316
The Meir outdoor pieces are made from 316 grade stainless steel with zero lead content. The 200 mm round rose is 10 mm thick excluding nozzle projection and is rated 3 star at 9 litres per minute. The 400 mm arm has a curved shape, a drop of 80 mm and a brushed finish, and its box holds the arm, a fixing kit and installation instructions. The combination shower rail pairs a 200 mm rose with a single-function hand shower, both rated 3 star at 9 litres per minute, with an arm reach of 365 mm and a projection of 500 mm. The rose comes without an arm, so buy the arm with it. For outdoor showers as a topic, see outdoor showers.
Caroma Titan
The Titan wall arm and the 200 mm ceiling arm are 304 grade stainless steel, the ceiling arm with a brushed finish and the wall arm polished. The ceiling arm drops 200 mm from the ceiling. See shower arms for the full arm range, and ceiling showers for the ceiling-mounted pieces.
The 316 floor drain
The Phoenix Point tile-insert drain is also in the collection, made from 316 stainless steel and suitable for indoor and outdoor use. It is a small wet area drain, in 100 and 130 mm sizes with 76 and 90 mm outlets, and you should allow for its height, width, depth and outlet position as early as the concrete pour in a new house. For the full range of drains, see floor wastes.
Stainless steel, brass or a plated finish
Stainless steel has no coat to wear through when it is used in its brushed state, so a scratch is a mark in the metal, not a breach. That is why it suits places where the surface takes a beating: a pool shower, a laundry, a coastal home. For an indoor bathroom with ordinary conditions, brass with a good finish is the usual choice, and it is the base of most of the other collections on this site. For the finish-led view, see chrome showers.
Other stainless steel shower pages
If you want a wider stainless steel selection by maker, three pages group it. A second maker's 316L marine grade range, with a rail, an outdoor hose and heads, is grouped at coastal 316 stainless steel showers. The Meir outdoor set is grouped at Meir outdoor 316 stainless steel. For the matching tapware, see stainless steel tapware.
Stainless steel by brand
For the brand ranges that carry stainless steel pieces, start from Phoenix showers, Meir showers and Caroma showers. Keeping the rose, the arm and the rail in one range keeps the brushed finish consistent, because the grain and the tone differ a little between makers.
Size, pressure and flow
Size the head to the shower zone. Round fixed heads run at 200 to 300 mm, with 150 to 200 mm for low-pressure systems and 250 or 300 mm for rain heads. The roses here are 200 and 250 mm. A bigger face does not add flow. It spreads the same water across more nozzles, so the streams soften.
These showers are rated for an operating pressure of 150 to 500 kPa. A simple check at home is the bucket test. A 10 litre bucket that fills in under 60 seconds under the shower points to good pressure, and large overhead rain heads suit supplies above about 200 kPa.
Flow ratings here are 3 star, from 8 to 9 litres per minute. Moving from 9 to 7.5 litres per minute saves thousands of litres of water a year, and some instantaneous gas hot water systems need a higher flow to fire, so check yours before choosing a lower-flow head. For a twin set, check both outlets: the Vivid Slimline SS twin lists the overhead at 3 star and the handpiece as not star rated at 7.5 litres per minute.
Heights
Set a fixed wall head at 2000 to 2100 mm above the finished floor to the centre of the arm outlet, and 2100 to 2200 mm for a tall household. The top of a rail sits at about 1800 to 1900 mm, and a wall mixer goes at 1000 to 1100 mm. Wall arms project 300 to 400 mm. Confirm the heights at rough-in, before tiling.
How to clean stainless steel
For routine care, wash with warm soapy water and rinse with cold water. Natural cleaning products or a stainless steel cleaner work well, and harsh or abrasive products can affect the finish. Avoid scourers, steel wool and steel scraping tools, any cloth previously used on ordinary steel, concentrated bleach and hydrochloric acid based cleaners, and prolonged contact with salts or acids. Rainwater is an effective natural cleaner for an outdoor installation.
Plan the washing interval from the place. In a coastal setting, wash 316 every 3 to 6 months. Indoors, stainless steel that is not exposed to the elements needs more frequent cleaning than the same steel outside, because there is no rain to wash it. Wipe the head and the arm after use in hard water areas, and keep a soft cloth for the job.
Will it fit your existing plumbing?
Retrofit fits are common: the Meir arm fits all standard half inch shower arms, the Vivid Slimline SS rail and hand shower fit existing half inch plumbing, and the twin has an adjustable bottom pillar. A like-for-like head swap is a simple job. Moving an outlet, adding a diverter or changing the arm is not, and it needs a licensed plumber. The rules on what an owner may do themselves differ by state, so check yours before you start.

