Skip to content

Cabinet Handles

984 Items

  • $4 Off RRP
    Iver Puerto 38mm Cabinet Knob Signature Brass

    Iver Puerto 38mm Cabinet Knob Signature Brass

    Checking delivery...
    $26
    $4 (-13%) OFF RRP of $30
    $4 (-13%) off RRP of $30
  • In Stock
    Momo Handles Dallas D Handle Brushed Matt Brass
    Best Selling Handle

    Momo Handles Dallas D Handle Brushed Matt Brass

    Checking delivery...
    $12
    $0 (-0%) off RRP of $12
  • $1 Off RRP
    Momo Handles Dallas D Handle Dull Brushed Nickel

    Momo Handles Dallas D Handle Dull Brushed Nickel

    Checking delivery...
    $5
    $1 (-16%) OFF RRP of $6
    $1 (-17%) off RRP of $6
  • Momo Barletta D Handle Stainless Steel

    Momo Barletta D Handle Stainless Steel

    Checking delivery...
    $17
    $0 (-0%) off RRP of $17
  • Momo Handles Ferrara Lip Pull Polished Stainless Steel

    Momo Handles Ferrara Lip Pull Polished Stainless Steel

    Checking delivery...
    $10
    $0 (-0%) off RRP of $10
  • Sale On Now!

    Sale On Now!

    Up to 70% off across the store, plus free towels and mirrors up for grabs on orders over $800*

    Shop the Sale
  • $25 Off RRP
    Nero Mecca Pull Handle 330mm Brushed Bronze

    Nero Mecca Pull Handle 330mm Brushed Bronze

    Checking delivery...
    $74
    $25 (-25%) OFF RRP of $99
    $25 (-25%) off RRP of $99
  • Turner Hastings Fanetta 224mm Pull Handle English Bronze

    Turner Hastings Fanetta 224mm Pull Handle English Bronze

    Checking delivery...
    $100
    $5 (-4%) OFF RRP of $105
    $5 (-5%) off RRP of $105
  • Nero Bianca 200mm Pull Handle Brushed Bronze

    Nero Bianca 200mm Pull Handle Brushed Bronze

    Checking delivery...
    $121
    $0 (-0%) off RRP of $121
  • Nero Bianca Knob Brushed Bronze

    Nero Bianca Knob Brushed Bronze

    Checking delivery...
    $44
    $0 (-0%) off RRP of $44
  • Superior hardware and fittings to enhance any space.

    Superior hardware and fittings to enhance any space.

    Shop Momo Handles ->
  • Nero Bianca 130mm Pull Handle Brushed Bronze

    Nero Bianca 130mm Pull Handle Brushed Bronze

    Checking delivery...
    $82
    $0.50 (-0%) OFF RRP of $82.50
    $0.50 (-1%) off RRP of $82.50
  • $1 Off RRP
    Momo New Prato Bow Handle Brushed Matt Brass

    Momo New Prato Bow Handle Brushed Matt Brass

    Checking delivery...
    $11
    $1 (-8%) OFF RRP of $12
    $1 (-8%) off RRP of $12
  • Nero Bianca Knob Brushed Gold

    Nero Bianca Knob Brushed Gold

    Checking delivery...
    $44
    $0 (-0%) off RRP of $44
  • Nero Bianca 440mm Appliance Pull Handle Chrome

    Nero Bianca 440mm Appliance Pull Handle Chrome

    Checking delivery...
    $297
    $0 (-0%) off RRP of $297
  • Nero Bianca Knob Gun Metal

    Nero Bianca Knob Gun Metal

    Checking delivery...
    $44
    $0 (-0%) off RRP of $44
  • Superior hardware and fittings to enhance any space.

    Superior hardware and fittings to enhance any space.

    Shop Momo Handles ->
  • Nero Bianca 440mm Appliance Pull Handle Matte Black

    Nero Bianca 440mm Appliance Pull Handle Matte Black

    Checking delivery...
    $319
    $0 (-0%) off RRP of $319
  • Nero Bianca 440mm Appliance Pull Handle Brushed Bronze

    Nero Bianca 440mm Appliance Pull Handle Brushed Bronze

    Checking delivery...
    $363
    $0 (-0%) off RRP of $363
  • Nero Bianca 440mm Appliance Pull Handle Brushed Nickel

    Nero Bianca 440mm Appliance Pull Handle Brushed Nickel

    Checking delivery...
    $319
    $0 (-0%) off RRP of $319
  • Nero Bianca 200mm Pull Handle Gun Metal

    Nero Bianca 200mm Pull Handle Gun Metal

    Checking delivery...
    $121
    $0 (-0%) off RRP of $121
  • Nero Bianca 440mm Appliance Pull Handle Gun Metal

    Nero Bianca 440mm Appliance Pull Handle Gun Metal

    Checking delivery...
    $363
    $0 (-0%) off RRP of $363
  • Nero Bianca 360mm Pull Handle Matte Black

    Nero Bianca 360mm Pull Handle Matte Black

    Checking delivery...
    $198
    $0 (-0%) off RRP of $198
  • Nero Bianca 130mm Pull Handle Chrome

    Nero Bianca 130mm Pull Handle Chrome

    Checking delivery...
    $66
    $0 (-0%) off RRP of $66
  • Nero Bianca 360mm Pull Handle Brushed Nickel

    Nero Bianca 360mm Pull Handle Brushed Nickel

    Checking delivery...
    $198
    $0 (-0%) off RRP of $198
  • Nero Bianca 440mm Appliance Pull Handle Brushed Gold

    Nero Bianca 440mm Appliance Pull Handle Brushed Gold

    Checking delivery...
    $363
    $0 (-0%) off RRP of $363
  • Discover hardware designed to inspire

    Discover hardware designed to inspire

    Shop Iver Handles ->
  • Nero Bianca 360mm Pull Handle Gun Metal

    Nero Bianca 360mm Pull Handle Gun Metal

    Checking delivery...
    $220
    $0 (-0%) off RRP of $220
  • Nero Bianca 200mm Pull Handle Brushed Gold

    Nero Bianca 200mm Pull Handle Brushed Gold

    Checking delivery...
    $121
    $0 (-0%) off RRP of $121
  • Nero Bianca 200mm Pull Handle Brushed Nickel

    Nero Bianca 200mm Pull Handle Brushed Nickel

    Checking delivery...
    $110
    $0 (-0%) off RRP of $110
  • Nero Bianca 360mm Pull Handle Chrome

    Nero Bianca 360mm Pull Handle Chrome

    Checking delivery...
    $187
    $0 (-0%) off RRP of $187
  • Nero Bianca 200mm Pull Handle Matte Black

    Nero Bianca 200mm Pull Handle Matte Black

    Checking delivery...
    $99
    $0 (-0%) off RRP of $99
  • Nero Bianca 200mm Pull Handle Chrome

    Nero Bianca 200mm Pull Handle Chrome

    Checking delivery...
    $99
    $0 (-0%) off RRP of $99
  • Nero Bianca 360mm Pull Handle Brushed Bronze

    Nero Bianca 360mm Pull Handle Brushed Bronze

    Checking delivery...
    $220
    $0 (-0%) off RRP of $220
  • Nero Bianca 360mm Pull Handle Brushed Gold

    Nero Bianca 360mm Pull Handle Brushed Gold

    Checking delivery...
    $220
    $0 (-0%) off RRP of $220
  • Nero Bianca 130mm Pull Handle Gun Metal

    Nero Bianca 130mm Pull Handle Gun Metal

    Checking delivery...
    $82
    $0.50 (-0%) OFF RRP of $82.50
    $0.50 (-1%) off RRP of $82.50
  • Nero Bianca 130mm Pull Handle Brushed Gold

    Nero Bianca 130mm Pull Handle Brushed Gold

    Checking delivery...
    $82
    $0.50 (-0%) OFF RRP of $82.50
    $0.50 (-1%) off RRP of $82.50
  • Nero Bianca 130mm Pull Handle Matte Black

    Nero Bianca 130mm Pull Handle Matte Black

    Checking delivery...
    $71
    $0.50 (-0%) OFF RRP of $71.50
    $0.50 (-1%) off RRP of $71.50
  • Nero Bianca 130mm Pull Handle Brushed Nickel

    Nero Bianca 130mm Pull Handle Brushed Nickel

    Checking delivery...
    $71
    $0.50 (-0%) OFF RRP of $71.50
    $0.50 (-1%) off RRP of $71.50
  • Discover hardware designed to inspire

    Discover hardware designed to inspire

    Shop Iver Handles ->

Cabinet handles buying guide


Cabinet handles are the pulls, knobs and edge profiles that open the drawers, cupboard doors and appliance panels in a kitchen, bathroom, laundry or built-in. Five decisions settle the order: the type, the hole centre, the length, the finish and the screws. The hole centre comes before everything else, because it decides whether a handle fits the holes already drilled in your doors. The sections below take the decisions in that order and send each one to the page that holds the choices.

Choose the type

A knob fixes with one screw and sits at a single point. It suits a small door and is less comfortable on a heavy drawer. A pull handle fixes at two points and gives a firmer grip, which is why bar handles and D handles go on wide drawers and pantry doors. A T-pull is a bar on a single stem, a lip pull sits along the top edge of a drawer or door and leaves the front almost clear, and a cup pull is the hooded half circle common on Shaker and farmhouse fronts. An appliance pull is longer and stronger, built for an integrated fridge or dishwasher panel.

Many kitchens mix the two main types, with knobs on the doors and pulls on the drawers, and keep one finish across both. The types sort by the look they give. Bar, flat and stainless steel handles read as modern, while cup handles, knobs and bow handles read as traditional. Finger pulls, flush pulls and recessed knobs read as minimalist, and lever handles, D handles and timber handles sit in the contemporary group. The type pages show what each looks like: cabinet pull handles, cabinet knobs, lip pull handles, cup pull cabinet handles and appliance pull handles.

Types in more detail

Bar handles are the most versatile type, with the widest spread of lengths and finishes, and they are easy to wipe clean. The Castella Coast pull is a bar handle made from 316 marine grade stainless steel in three lengths, and a stainless steel polish keeps it looking new. The Meir Oppen edge pull is a lip style in 304 grade stainless steel with a PVD finish, in 75mm, 150mm and 300mm lengths, and it suits bathroom and kitchen cabinets.

Lip pulls answer the wish for a handle-less look that still opens. The Castella Ledge solid brass lip pull is a low-profile pull that gives an integrated appearance on contemporary cabinetry. It comes in several lengths and finishes, including bronze, black, white and stainless steel, with screws for fixing. A lip pull sits where the fingers already land on the edge of a door or drawer, so it needs no space on the face, which makes it a fit for a small kitchen or a narrow bathroom where a projecting bar would catch clothing.

Cup and half-moon pulls suit drawers and lower cabinets and carry the most character. The Turner Hastings Verese cup pull has a soft half-moon shape and is finished in English Bronze, and the Otti Newport cup pull is a curved 90mm pull in brushed brass. The Momo Handles Barrington Eclipse is a half-moon handle in a ribbed finish that forms a full circle when two are mounted side by side, with fitting distances of 64mm and 94mm. Half-moon pairs like this dress a wide drawer without a single long bar.

Knobs come in round, square, mushroom and T shapes, and the material changes the feel. The Momo Trianon is a 35mm ceramic knob in white and brushed nickel for traditional cabinetry, the Momo Handles Luv Wood D handle is sealed timber, and the Momo Handles Flexa pull is leather with a brass or pewter button. Timber and leather bring warmth next to stone and metal. Timber handles suit a cabinet thickness of 16mm to 25mm, so check your door against it.

Appliance pulls are the long end of the range. The Nero Mecca appliance pull is 520mm and is supplied with M6 x 35mm mounting screws, and the Castella Decade and Ridge appliance pulls are solid brass and use M6 screws. All of them are for integrated fridges, dishwashers, ovens and tall pantry doors, where a short pull would put your hand too close to the edge of the panel.

Fit starts with the hole centre

A pull is sized by the distance between its two screw holes, measured from the centre of one hole to the centre of the other, and not by its overall length. A handle that looks the right size can still miss the holes by a few millimetres. Knobs are different, because they use a single hole and are measured by diameter. The handles on this page show the fixing distance for pulls and the overall length for both, so read the two lines separately.

Choose the length for the door or drawer

The one-third rule is the usual starting point: choose a pull about one third the width of the drawer or door front. On a 600mm drawer that points to a handle near 200mm. The Blue Space placement and sizing page calls it a starting point and not a strict rule. Oversized pulls overwhelm a small cabinet, and a tiny knob looks lost on a large door.

Upper cabinets are the exception to the long-pull rule. Wall cabinets suit smaller knobs or short handles, and wide drawers suit long pulls. A consistent size across the kitchen gives a cohesive look, while varying sizes is also acceptable when the finish stays the same. Many homes keep one handle family in several lengths, short on small drawers and long on wide ones, so the kitchen reads as one set. The D-shaped, half-moon, round and square pages sort the same handles by outline.

Check the projection and the cabinet thickness

Two more lines on the spec decide comfort and fit. Projection is how far the handle stands off the door, and it sets how much room the fingers have behind it. The cabinet thickness line says what depth of door the handle is made for. The stainless steel pulls in one range suit 13mm to 18mm cabinet walls, a timber knob range suits 16mm to 25mm, and another range suits 15mm to 35mm. Check the line against your door before you order, because a handle outside its thickness range can fix badly or not at all.

Where to place the handle

The placement rules are simple. Centre a handle or knob horizontally on a drawer front, and keep the same height along a run of drawers. Drawer handles usually run horizontally and door handles vertically. A base cabinet door handle goes near the top corner, on the edge opposite the hinge, and a wall cabinet door handle goes near the bottom corner, also opposite the hinge. On a pantry or tall door, a long vertical handle sits at a comfortable hand height and not at the exact centre, and a large drawer can take two evenly spaced handles.

Screws and fixing

Most pulls and knobs on this page fix from the back of the door with M4 screws or bolts, and the spec line shows which come in the box. The "Screws included" line differs between handles, so read it for the handle you choose. Some ranges supply two screw lengths to suit different door thicknesses, for example 30mm and 45mm on the Nero Mecca T-pull, and appliance pulls use the heavier M6 screw. A spring washer helps on heavier applications. 25mm screws suit fronts about 18mm thick, and thicker fronts need longer screws.

Material and finish

The range covers brass, solid brass, zinc alloy, stainless steel, aluminium, timber, leather and ceramic. The spec line shows the finish or coating: PVD, electroplated, lacquered or powder coated. The coating matters as much as the metal. Polished chrome and nickel show fingerprints easily, while brushed and matte finishes hide them. Brass and bronze change over time, because they develop a natural patina that can be polished back for the original gleam. A thin plated layer over a softer base metal can wear with daily handling, while a lacquered, PVD or powder coated finish is made to resist that wear.

For a bathroom or laundry, read the product page for the material and the coating. The 304 grade stainless steel pulls with a PVD finish suit bathroom and kitchen cabinets, and the 316 marine grade stainless steel pull is the one in the higher grade. Choose the finish page that matches your room: brushed brass, brushed nickel, black, white, chrome, bronze, gunmetal grey, champagne or timber. For a material choice, see solid brass, stainless steel or aluminium.

Match the room

When you use more than one metal, pick one dominant finish and keep the undertones consistent, warm with warm and cool with cool. Limit the number of finishes in one room and coordinate the handles with the tapware, lighting and hinges. Mixing handle types and sizes is a separate choice from mixing metals, so long appliance pulls on the pantry, T-bars on the lower drawers and small knobs on the upper cupboards can share a single finish and still read as one plan. Bathroom tapware is on the taps and mixers page, and the matching vanities are in the bathroom vanity guide.

Looking after handles

Wipe handles with a soft cloth and mild soapy water, and dry them. Abrasive pads, bleach and strong chemical sprays can damage a finish, so keep them away. Matte and satin finishes come up with a microfibre cloth. A textured or knurled handle collects dirt in the grooves, so run a soft brush or an old toothbrush along them with mild soap. Timber handles take a light coat of wood oil now and then. Brass and bronze can be polished with a brass cleaner for a bright finish in place of a patina, and stainless steel responds to a stainless steel polish.

Door handles and ranges

For handles that fit room doors and entrances, see door hardware. For a single range in several lengths, Meir Oppen and Momo premium are two places to start.

Frequently Asked Questions

What types of cabinet handles are available for bathroom vanities?

Bathroom vanity cabinet handles come in bar pulls, knob handles, T-bar pulls, cup pulls, and edge pulls (for handleless drawer looks). Bar pulls in lengths of 96mm, 160mm, and 256mm are among the most popular in Australian bathrooms for their clean, contemporary appearance. Knobs are a classic choice for traditional or Hamptons-style bathrooms. The Blue Space stocks handles from brands including Momo Handles and Zanda in finishes to suit every style.

What size cabinet handle do I need?

Australian handles are generally measured by "hole centres", the distance between the two screw holes, measured centre to centre. Common sizes include 96mm and 128mm for kitchens, and 160mm becoming increasingly popular in modern builds. As a general guide, the 1/3 rule works well: your handle length should be roughly one-third the width of the door or drawer. So a 600mm-wide drawer suits a handle around 160–200mm, while smaller drawers under 300mm work best with a shorter 70–100mm pull or a knob.

Should I choose cabinet handles or knobs?

Both have their place, and many homes use a mix of the two. Handles offer a larger, more comfortable grip, making them ideal for drawers and heavier daily use. Knobs are simple to install, easy to clean, and suit cabinet doors or lower-traffic areas where a subtler look is preferred. A common approach is to use handles on drawers and knobs on doors, giving your kitchen, bathroom or laundry a considered, tailored finish.

Can I use the same cabinet handles in my kitchen, bathroom and laundry?

Yes, and many homeowners do this to create a seamless, considered flow throughout the house. That said, it's important to factor in environment: bathrooms and laundries are exposed to higher humidity and moisture, so finishes like solid brass with a PVD coating, stainless steel, or quality powder-coated options will hold up better than raw or untreated materials over time.

How do I replace cabinet handles without drilling new holes?

Measure your existing hole centres by checking the distance between the centre of each screw hole, then choose a new handle with matching hole centres. If you'd like to switch to a different style or size, options like backplates, edge pulls, or handles designed to cover old holes make it possible to update your look without redrilling your cabinetry.

How do I match cabinet handle finishes with my tapware and appliances?

For a cohesive, well-designed home, cabinet handles are best chosen to complement your tapware, sink and appliance finishes. Matte black handles pair beautifully with matte black tapware for a contemporary look, while brushed nickel or brushed brass options suit warmer, Hamptons-style spaces. If your appliances are stainless steel, brushed nickel or stainless handles will tie the room together. It's worth considering your whole space, kitchen, bathroom and laundry, for a consistent finish throughout the home.

Is there a general sizing rule for cabinet handles?

It's a rough sizing guide, not a strict standard: a handle's length should sit at roughly a third of the width of the door or drawer front it's mounted on. A 450mm drawer front suits a handle in the 150-160mm range, a 600mm drawer suits something closer to 180-200mm, and anything under 300mm generally looks better with a short 70-100mm pull or a knob instead. Handles are sized by hole centres, the distance between the two fixing screws measured centre to centre, so check that figure against your existing holes if you're replacing rather than starting from scratch.

What is the latest trend in cabinet handles?

Slim, linear bar pulls and flush edge pulls (which sit recessed into the top edge of a drawer for a near-handleless look) have both held steady for a few years now, and mixing metals within one kitchen or bathroom, say a matte black tap with brushed brass handles, has become more common rather than staying an outlier choice. Beyond that, trend detail tends to be finish-specific: see the brushed brass, brushed nickel, gunmetal grey and bronze ranges for what's moving in each finish.

Where is the best place to buy cabinet handles?

Look for a retailer that stocks handles across multiple finishes and hole-centre sizes side by side, since matching an existing drill pattern (or deliberately changing it) is the main practical constraint when buying. Being able to compare finish and profile in one place also makes it easier to keep hardware consistent across a kitchen, bathroom and laundry that were fitted out at different times.

Where can I find affordable cabinet handles?

Price is driven mainly by base material, finish process and profile complexity rather than brand alone. A simple bar pull in a standard plated finish will generally cost less than the same profile in a heavier solid-brass build or a PVD-coated finish designed to resist wear, and a straightforward knob is usually the cheapest option per opening. Comparing like-for-like profiles across finishes is a more useful way to manage cost than assuming one finish family is always cheaper than another.

How do I match cabinet handle finishes across my kitchen, bathroom and laundry?

Start from whichever room has the most fixed finishes already, usually tapware or appliances, and work outward from there rather than choosing handles first. Warmer finishes like brushed brass or bronze suit spaces with warm-toned tapware or timber, while brushed nickel and gunmetal grey sit closer to a cooler, more contemporary palette. It doesn't need to be identical hardware in every room, consistent finish family across the home reads as considered even when profiles differ slightly between spaces.