Large bath buying guide
A large bath is a bath of 1700mm and longer, and the baths on this page run from about 1700mm to 1850mm. They include freestanding, back to wall, island, inset and spa baths in acrylic, stone and solid surface, from Turner Hastings, Decina, Caroma, BelBagno, Fienza and Kaskade. Large bath, big bath, extra large bathtub, 1800mm bath and two person bath all describe the same search. There is no single name for an oversized bath. 1800mm is the largest standard size, and the terms in use are large, extra large and two person. The sections below cover how big these baths are and whether the room can take one. They also cover how to get one through the door, what the floor and the hot water have to carry, and what each build offers.
How big is large
Large or two person baths run 1800mm to 2000mm long and 800mm to 1000mm wide, with an overall height of about 550mm to 750mm. A 1700mm bath with 800mm of width or more is a large option too. The baths on this page sit inside that picture. The Caroma Maxton and the Newbury Island Plus are 1800mm. The Turner Hastings Kirkham Ball is 1800mm by 840mm by 725mm, the Kaskade Lucia is 1800mm by 900mm by 570mm, and the Decina Mintori and Caval are 1790mm by 900mm by 496mm. The Decina Duo is 1850mm and the Lago 1795mm. The BelBagno Palermo is 1750mm by 850mm by 600mm, and the Fienza Nero is 1780mm by 880mm by 520mm.
Not every large bath is very long. The Turner Hastings Claremont is 1704mm by 839mm by 615mm, and the Caroma Urbane II comes in 1580mm and 1775mm with widths of 735mm and 805mm. Width and depth change the soak as much as length does, so compare the whole specification line.
Who a large bath suits
A large bath suits two people, a family, or a taller person who wants room to stretch out. It suits couples, families, taller people and anyone wanting a reclined soak, and a bath with a deep interior is one of the best choices for a full-body soak. A two person bath is worth the space when two adults will use it regularly, and it needs a larger bathroom footprint and uses more water and hot water. People who search for a bath for tall people, a 2m bath or a 2m long bath are asking about length, and the sizes above are the real lengths on offer.
Will it fit the room
1700mm is the practical upper end in many Australian bathrooms, which are about 4 to 8 square metres, once circulation, vanities and door swings are allowed for. A 1700mm bath generally needs a wall of at least 1800mm. A 1800mm bath therefore needs a long wall, and the room has to leave space around it. Keep roughly 760mm to 900mm of clear floor in front of the bath and at least 50mm around a freestanding tub for cleaning. Measure the wall, the door swing, the window, the vanity and the toilet, and measure how far the bath projects into the room as well as its length. The 1500mm to 1700mm baths page covers the common range, and 1700mm baths covers that length across makers.
Getting it through the door
Large baths may not fit through a standard doorway, so check the doorway width and the turning space before ordering. A stone bath of 1800mm may not fit through a standard 820mm door. The route matters from the delivery point to the room: gates, hallways, corners and stairs. Fienza stone baths weigh in excess of 150kg and are delivered to an area in front of the home where a tail lift truck or pallet jack can reach easily. Plan the path before the bath arrives.
Two people in one bath
A two person bath is worth the space when two adults will use it regularly, and it is usually not suited to small bathrooms. Look for supportive, sloped backrests at both ends, a drain that does not sit under either bather, a tap that does not obstruct either reclining position, and an interior wide enough for both bathers' knees and legs. Double-ended designs generally support shared soaking better. Size the bath around the taller regular user and then confirm the second person has a supported position. Thick rims, armrests and moulded contours reduce usable space, so check the interior dimensions for width at the shoulders, hips and feet. Two bathers displace some water, but that does not mean the water heater can deliver a full, warm fill.
Capacity and what it means for hot water
Typical capacity is about 220 to 400 litres or more, and two person baths typically hold 300 litres or more. Litre figures are not measured consistently, so compare manufacturer figures at the same fill level. The baths on this page show the spread. The Kaskade Lucia 1800mm holds 602 litres, the Turner Hastings Claremont 445 litres, the Fienza Nero 310 litres, and the Caroma Urbane II 290 and 310 litres. Decina measures capacity 200mm below the bath rim, which is a lower fill line than an overflow level. Freestanding baths typically hold 200 to 280 litres and built-in baths 180 to 240 litres, so several of the large baths here sit above both ranges.
Weight and the floor
A large stone bath filled with water can weigh over 500kg, and a structural engineer is the right person for heavy tubs or upper floor installations. The empty weights are a guide: the Kaskade Lucia 1800mm is 145kg, the Claremont 150kg and the BelBagno Palermo 47kg. Acrylic is far lighter than stone, so the material is the first lever on floor load.
Freestanding, back to wall, island and inset
A large bath can be any installation type, and each has its own page. Freestanding baths stand clear of the walls and need floor around them. Back to wall baths give the freestanding look with a flat side against a wall, which saves floor space and leaves no gap behind to clean. Island baths sit inside a built hob, and the Decina Caval and the Caroma Newbury Island Plus are here. Built in baths are tiled over or boxed in. A large bath needs more clear floor on every side than a short one, and an island or inset bath needs the hob and the tiling planned around it.
Spa baths over 1700mm
Several Decina spa baths fall in this length: the Duo at 1850mm, the Lago at 1795mm, the Mintori at 1790mm and the Modena. A spa bath adds jets and a pump to an acrylic shell, and spa versions need checks on electrical and plumbing requirements. The pump has to be reachable for servicing, so the access panel is planned before the tiling. Capacity on the Decina spa baths is measured 200mm below the rim. The spa baths page covers how spa baths work.
The large baths model by model
The Decina Caval is an 1800mm island bath, inset in a tiled island hob and placed anywhere in the bathroom, with a generous size that suits two bathers in a large ensuite or a big family bathroom. The Caroma Maxton is an 1800mm tile flange bath with integrated armrests for added comfort and a four tile flange for built-in installation. The bath sits right up against a wall and is tiled over the flange to create a water and dust tight seal. The Caroma Newbury Island Plus is an 1800mm bath designed for two, with comfortable reclined ends and a centre waste.
The Decina Duo is a classical oval for larger bathrooms, with arm rests, moulded back supports and large capacity lumbar jets that give superb comfort for two bathers. It has a double reinforced bath base for durability and two black Sia headrests included. The Decina Lago is a large rectangular bath with generous width that suits dual bathing, and a steel rod reinforced rim, a double reinforced base, six centro jets and twelve mini jets. The Decina Mintori is a freestanding spa bath with an oval, contoured interior shaped to support the back and shoulders, deep enough for a proper soak and wide enough for two. It has fourteen flush mounted jets and a rim mounted touch pad. Removable side panels on a patented magnetic fixing give access underneath for installation and cleaning.
The BelBagno Palermo is a back to wall freestanding bath in 100% high gloss pure acrylic, fibreglass reinforced in five layers, with a built-in metal frame, adjustable feet, a chrome waste included and certification to AU/NZ and European standards. The Turner Hastings Kirkham Ball is an 1800mm TitanCast bath with rounded ball feet and smooth, contoured edges, and the Claremont is a MagnaCast freestanding bath with a double-ended shape designed for reclining comfort. The Kaskade Lucia 1800mm is a thin-rimmed stone bath with adjustable legs and a 95mm void underneath for plumbing, and the Fienza Nero 1780mm is an egg shaped stone bath with an overflow and a chrome waste included.
Overflow, waste and plug
Most baths here are sold with the plug and waste separate, so the bath, the waste and the tapware are three separate decisions. Some baths have an overflow and others are non-overflow only. The Kaskade Lucia is non-overflow only with the waste sold separately, and the Claremont is also non-overflow only. Pop-down wastes are recommended for their safety, service and maintenance qualities, and the bath wastes page holds them. Australian building codes require fully removable bath wastes in some situations, so confirm with the plumber which waste suits the installation.
Choosing a large bath
Start with the room, then the route in, then the floor. Measure the wall, the door and every corner on the way, and ask the builder what the floor and the hot water can carry. Choose the material next: acrylic where weight matters, stone or solid surface where heat retention and a denser feel matter more and the floor is ready. Check the width and the inner depth, because they decide the soak. Finish with the waste and the tapware, and read the specification sheet and installation instructions before the tiler starts.
For the full range across sizes, shapes and materials, return to bathtubs.


