Lane door hardware buying guide
Lane is an Australian door hardware brand that started in Newcastle in 1919, when Henry Lane opened a hardware shop. Its range today covers interior and exterior door hardware, sliding door hardware, cabinet hardware, accessories and electronic locks. This collection brings the Lane door range together: levers, knobs, entrance sets, deadbolts, sliding door sets, pulls, hinges and stops. Below you will find how the range is organised, which material and finish suit which door, which numbers decide fit, and which Lane collection to open next. Check the finish, size and fit figures on each product before you order. For other makers, see door handles and door hardware.
How the range is organised
The range splits by function first and by design second. A passage set has no lock and suits connecting doors such as living rooms and laundries. A privacy set locks from inside for bathrooms and bedrooms. A dummy handle only pushes, pulls or shuts a door, for cupboards, wardrobes and pantries. An entrance set pairs a lever or knob with a key cylinder for an exterior door. Lane's own product list also separates deadbolts, cavity sliding locks with flush pulls, knob sets, pull handles and electronic locks. Choose the function by what the door does, then choose the range.
Lever ranges
Each lever range is a design family sold in matching passage, privacy, dummy and entrance sets, so every door in the house can carry the same handle. Check materials, thickness and finishes on each product. The Lane Oxford collection is a zinc alloy lever on a round rosette with concealed fixings, in gun metal grey, matte black and brushed satin chrome. The Lane Victoria collection is a zinc alloy lever in brushed satin chrome and polished chrome. The Lane Avalon collection is zinc alloy in brushed satin chrome, matte black and polished chrome. The Lane Westminster, Lane Buckingham, Lane Cambridge, Lane Murano and Lane Tovetto ranges come in brushed satin chrome in zinc die cast or zinc alloy. For the whole lever range in one place, see Lane door levers.
Knobs
The Lane Bala collection is the knob range. It is made of brass and sold in passage, privacy, dummy and entrance sets in finishes including polished brass, satin stainless steel, polished stainless steel, antique bronze and matte black. The dummy knob is supplied as a single knob, so order two for both faces of a door. The entrance set comes with three keys. For all knobs, see Lane door knobs and door knobs.
Entrance sets and deadbolts
Entrance sets carry a key. The Lane Corvan entrance sets use a single cylinder with a deadbolt and latch in one set, are keyed with three keys, and use a 60mm backset on a 35 to 45mm door. The Lane Bala entrance knob uses a C4 five-pin cylinder. For a separate lock, Lane deadbolts come as single and double cylinder types in satin stainless steel, polished stainless steel and brushed satin chrome. The bolt adjusts between 60mm and 70mm and suits a 54mm cross bore hole on doors 32 to 45mm thick. See also exterior door levers, entry door lock sets and deadbolts.
Material and finish
Each Lane set names its material in the specification. The Lane lever ranges are zinc alloy or zinc die cast. The Bala knobs are brass. The deadbolts are stainless steel or zinc alloy. The hinges are 304 grade stainless steel. Finishes run from chrome in brushed satin and polished through matte black, gun metal grey and stainless steel to brass and antique bronze. Choose the finish by what else is on the door and nearby, such as tapware, light fittings and hinges. See the finish pages for the full choice across makers: chrome door handles, matte black door handles, gun metal door handles, stainless steel door handles and brass door handles.
Numbers that decide fit
Three numbers decide whether a Lane set fits: door thickness, the hole already in the door and the backset. The Bala and the deadbolts suit doors 32 to 45mm thick. The Oxford, Westminster, Buckingham, Cambridge, Murano and Tovetto suit 33 to 45mm, and the Victoria and Avalon suit 35 to 45mm. Almost every lever and knob has a 50 to 54mm cross bore, and the levers have a 60mm backset. The sets are non-handed, which means the handle rotates into the correct position for both left and right hand doors, and they suit inward and outward opening doors. Measure the thickness of your door, the diameter of the hole and the distance from the edge to the hole centre, then match them to the product details.
Retrofit and low-profile levers
Some Lane levers are made to replace an older handle without drilling. The PIVYT dummy lever suits the common 50 to 54mm face holes and can be retrofitted over standard lever and knob installations. The Evie privacy lever has patented magnetic covers for easy installation. Both are in matte black in zinc alloy. See privacy door levers and passage door handles for the wider choice.
What is in the box
Read the box contents on every product page, because the parts differ. Passage and privacy sets include two levers or knobs, the latch, the strike plate and fixings. Dummy handles include one handle and fixings, so a door that needs a handle on each face needs two. The entrance sets include three keys. The Grande electronic IC cards are an accessory in epoxy resin, which belongs with the electronic locks, not with the mechanical sets. See dummy door handles.
Low-profile levers
The Lane Low Profile levers come as privacy and passage options in matte black or satin nickel for doors 33 to 45mm thick, with a magnetic self-aligning design, and they can be fitted to new or existing doors with instructions and fixings included. The products in this collection that carry the same low-profile idea are the PIVYT passage, privacy and dummy levers and the Evie privacy lever, all in zinc alloy and matte black. The PIVYT passage suits a 33 to 45mm door thickness, and the PIVYT dummy suits a door thickness range of 16 to 45mm. Check the thickness line for the exact set you buy.
Sliding doors
Sliding doors need low-profile hardware. The Lane cavity slider sets have a 60mm by 60mm square rosette, a 60mm backset, a matching finger pull and a 54mm cross bore on doors 32 to 45mm thick, and they suit sliding doors only. The Lane rectangle flush pull is 120mm in brushed satin chrome and matte black. See sliding door handles and flush pulls.
Hinges, stops and pulls
Keep the hinge and stop in the same finish as the handle. The Lane loose pin butt hinges are 100 by 75 by 2.5mm in 304 grade stainless steel, available in matte white, satin stainless steel and other finishes, and the radius hinge is 90 by 60 by 1.6mm. The black fixed pin butt hinges come in 85mm and 100mm. The Lane bullet door stop is 75mm in steel in gun metal grey. The Lane round pull door handle is 304 stainless steel at 600 by 450 by 32mm, and it comes as two handles with fixings. See hinges, door stops and cabinet handles.
Electronic locks
Lane's range also includes electronic locks, and the Grande IC cards in this collection belong to that system. For keyless entry across makers, see smart door locks.
Our recommendation
Choose the function first, then the range, then the finish. Read the material and the door thickness on the product page, measure the door and the hole, and match them. Take the whole door from one Lane range so passage, privacy, dummy and entrance sets match, and keep the hinges and stops in the same finish. Check the box contents for single handles and for keys. That order avoids the common errors: a lever that does not suit the door thickness, a pair ordered where only one handle is sold, and two near-matching chromes on one wall.
Questions about Lane door hardware
Who owns Lane Hardware?
Henry Lane opened his first hardware shop in Newcastle in 1919, the first Australian rim locks followed in 1928, and the brand marked 100 years in 2019. Matte black was introduced across the range in 2015.
Do all door handles fit all doors?
No. Fit depends on the door thickness, the cross bore and the backset, and the Lane ranges differ. The Bala knobs and the deadbolts suit doors of 32 to 45mm. The Oxford, Westminster, Buckingham, Cambridge, Murano, Tovetto, PIVYT and Evie sets suit 33 to 45mm doors, and the Victoria, Avalon and Corvan sets suit 35 to 45mm. The cross bore is 50 to 54mm and the backset is 60mm on most. Measure the door across the edge, and the backset from the door edge to the centre of the hole, not across the hole itself.
What does a Lane set include?
The boxes list levers, a latch, a strike plate and the fixings. The entrance sets include three keys, and the Corvan entrance set has a deadbolt and latch in one. Dummy handles are sold singly, so order two for a door that needs one on each side. Check the box line for the exact set.
Putting a Lane door together
A full Lane door starts with the function, then the lock. A lever set from the Oxford or Victoria range handles the latch. For an entrance door, add one of the Lane deadbolts, which come in single and double cylinder versions and are covered on Lane deadbolts. The entrance sets include three keys, so the household has spares from the start. Check the thickness range of the range you choose against your door before you order.
Finish the door with matching hinges and a pull where the door calls for one. The Lane hinges and pull are 304 stainless steel, and the Bala knob is brass, so the metals differ by piece. Choose the finish across the whole door at once, and use the same range for the levers inside and out so the shapes agree. If the door slides, the cavity slider sets and the flush pull rectangle at 120mm keep the same look, and the slider sets are for sliding doors only.


