What the Phoenix shower range covers
Phoenix is an Australian tapware and shower maker, and this collection holds its whole shower line: fixed heads, hand showers, rail sets, twin sets, wall shower systems and arms, in a large number of named ranges. The same names run through the tapware, so a shower can match a mixer, a basin tap and the accessories. The line splits into rain showers for a full soak, handhelds for flexible daily use, and twin systems that combine an overhead and a handheld, which suit family bathrooms.
The range is big enough that the useful question is not what Phoenix sells but which range suits your bathroom. The choices that cut across all of them are type, size, flow, inlet, finish and fit. For the matching tapware, see Phoenix tapware. For other makers, the full range sits in showers.
Find your type first
Start with the bathroom size and the daily need: an overhead rain shower, a handheld, or a twin system. That order works because the type decides the plumbing.
- A fixed head on an arm gives a steady wash from the wall. The roses and arms have their own pages: Phoenix shower rose and Phoenix shower arms.
- A hand shower gives a focused spray for rinsing, cleaning and bathing children. The slider and rail versions are in Phoenix shower rail range.
- A twin set pairs an overhead with a handset on one rail with a diverter. See compact twin showers for smaller recesses and twin shower heads for the whole family of sets.
- A wall shower system adds a mixer and a diverter in one wall plate. See Phoenix shower systems.
The Vivid and Vivid Slimline ranges
Vivid is the largest family here. The Vivid Slimline pieces have a slender profile where flat and rounded surfaces come together, and the twin shower is an overhead and a hand shower in one system. The Vivid Slimline twin is rated 5 star WELS on both outlets at 6 litres per minute, with one spray function on the overhead and three on the handset. The Vivid Slimline hand shower is a three-function piece rated 4 star at 8 litres per minute, with a combination inlet and bracket that fits an existing half inch water inlet with no drilling.
The Vivid MKII compact twin brings a 250 mm overhead rose and a handpiece together in one wall set for tight recesses. It has a built-in diverter, an adjustable handpiece angle, a connection to an existing half inch inlet and dual check valves that meet AS 2845.1. The MKII rail shower has a push-button slider and adjustable pillars so the rail can line up with fixings already in the wall, with three spray functions on the handpiece.
One Vivid variant is made for harsher places. The Vivid Slimline SS is made from 316 marine grade stainless steel, which suits outdoor kitchens, laundries and coastal homes. Its 250 mm round rose is rated 3 star at 9 litres per minute. For outdoor installs, see outdoor showers.
Vivid also supplies the ceiling arms, in 300 mm and 450 mm, as solid brass pieces that fit existing half inch plumbing. They are the arm only, so the rose is bought separately. See ceiling showers for the ceiling-mounted options.
Cromford, Lexi and Wiltern
These three ranges carry a design idea, not a technology. Cromford is pared-back and uncomplicated, with a nod to history in its finer details, and it is placed equally well in a modern farmhouse as in an industrial warehouse. The Cromford hand shower is brass with a single function handpiece that adjusts for angle and height, rated 4 star at 7 litres per minute. The rail shower has a brass handpiece, bracket and slider. Both fit an existing half inch inlet.
Lexi is built on angles, with a blend of round and square edges, and the hand shower is rated 3 star at 8.5 litres per minute. Its box lists the hand piece, a wall bracket, a hose, an installation kit and instructions. See Phoenix Lexi showers.
Wiltern takes its cue from Art Deco, with refined fluted lines. The rose is 220 mm across and 79 mm tall, in brass with an electroplated finish, rated 3 star at 8.5 litres per minute, and it fits all standard half inch shower arms. It comes in chrome, brushed nickel, brushed gold and brushed carbon.
Ormond, Oxley and the LuxeXP technology
The Ormond compact twin has a 250 mm overhead, a three-function push-button handpiece and a built-in diverter, rated 4 star at 7.5 litres per minute on each outlet, with drill-free installation on existing half inch plumbing. The Oxley twin rail adds the rail format. See Phoenix LuxeXP showers for the full set.
The NX ranges
The NX ranges are named pieces designed to sit together. The NX Quil hand shower has a 120 mm handpiece with a single function and low-profile nozzles that are easy to clean, a brass bracket and a soft-touch hose. The NX Orli rail has a square head that matches the square plate on the wall, a 100 mm handheld, a brass slider for the handset height and a concealed hose connection for a clean line, with a separate inlet and push-fit adapter. The NX Iko shower arm and rose pairs a 250 mm rain head with an up-swept arm that adds height, and a push-fit adaptor suits an existing half inch connection. It is rated 3 star at 8.5 litres per minute. See Phoenix NX showers.
Size, flow and pressure
Size the head to the shower zone. Round fixed heads run at 200 to 300 mm, with 150 to 200 mm for low-pressure systems and 250 or 300 mm for rain heads. The Phoenix roses run from 220 mm (Wiltern) and 230 mm (Vivid) up to 250 mm (LuxeXP, MKII and the NX Iko). A larger face spreads the same flow across more nozzles, so the streams are gentler, not stronger.
Phoenix showers are rated for an operating pressure of 150 to 500 kPa. The simple check at home is the bucket test. A 10 litre bucket that fills in under 60 seconds under the shower points to good pressure, and large overhead rain heads suit supplies above about 200 kPa.
Flow ratings run across 3, 4 and 5 star WELS, from 9 litres per minute down to 6. Dropping from 9 to 7.5 litres per minute saves thousands of litres of water a year. Some instantaneous gas hot water systems need more flow to fire and may not cope with low-flow heads. For the lowest water use, pick a 5 star item, and check your hot water system first if it is instantaneous gas.
Twin sets across the ranges
The 5 star sets at 6 litres per minute use the least water. The 3 star and 4 star sets give more flow per outlet, which suits a home with the supply to carry it. For the full comparison of how twin sets work, see twin shower heads.
Mounting heights
Heights sit in a narrow band. A fixed wall head sits 2000 to 2100 mm above the finished floor to the centre of the arm outlet, and 2100 to 2200 mm for a tall household. The top of a rail sits at about 1800 to 1900 mm, and the bottom of the rail at about 1000 to 1100 mm. A wall mixer goes at 1000 to 1100 mm, and wall arms project 300 to 400 mm. A rain head on a ceiling arm sits at 2100 to 2200 mm, depending on the ceiling height. Confirm the height at rough-in, before tiling, and give the plumber both outlet heights if you are fitting a diverter set.
Plan with the dimensions. The Vivid MKII and Cromford rails have set fixing distances, and the NX Iko has an up-swept arm to add height. If you need more height than a standard arm gives, check the arm length before you buy the rose.
Finishes and what they are made of
The finishes include chrome, brushed nickel, matte black, brushed gold, brushed brass, brushed carbon, gunmetal and white. Behind the colour names are three different methods: PVD, electroplating (which includes chrome plate) and, for the white Nuage pieces, powder coating.
PVD is significantly harder and more durable than traditional plating, electroplating is a durable plated finish, and powder coating is the softest of the three in wet areas. For a shower, choose PVD or electroplating where the part gets handled, and confirm the process before you decide.
For finish-led browsing, see chrome showers, brushed nickel showers, black showers, gold showers, gunmetal showers and brushed brass showers.
Will it fit your existing plumbing?
Most Phoenix showers are made for retrofit. They fit an existing half inch water inlet or shower arm, with drill-free installation and a combination inlet and bracket, and the rails use adjustable pillars so they can line up with old holes. Check three things: the inlet type, the fixing distance if you are replacing a rail, and whether the box includes the arm, hose or bracket you need.
The boxes differ, so check them. The Vivid rose comes as the rose only, and the Vivid Slimline hand shower comes with the hand piece and a hose. The Vivid ceiling arms are arm only. The NX Iko comes with the rose and the arm, and the Wiltern rose comes with the rose and an installation kit, with installation instructions.
A like-for-like head swap is a simple job. Moving an outlet, adding a diverter or changing the arm is not, and it needs a licensed plumber. The rules on what an owner may do themselves differ by state, so check yours.
Valves and care
A hand shower on a hose creates a backflow risk, and several Phoenix sets answer it with dual check valves that meet AS 2845.1, on the Vivid MKII compact twin and the Mekko and Gloss MKII systems. Check the specification of any hose-fed set you choose.
For care, use warm water, mild dish soap and a soft cloth, rinse off the soap and dry the product, and avoid abrasive tools and strong chemicals. Keep vinegar and lemon juice away from the coating, because acidic products do not suit every finish. In hard water areas, wipe the head and dry it after use.


