Gunmetal heated towel rails buying guide
A gunmetal heated towel rail is a dry electric rail in a dark grey metal finish, and it suits a bathroom with gunmetal or dark grey tapware, shower fittings and accessories. For most bathrooms the right call is to choose the power type and the shape first, then match the finish name. The finish is named Gunmetal on Caroma rails, Gun Metal on Nero, Thermogroup and Fienza rails, and Brushed Carbon on the matching Phoenix rails. This guide sets out the rails with their real specifications.
Matching the finish across brands
| Brand | Finish name | Rails in this finish |
|---|---|---|
| Caroma | Gunmetal | Liano II ladder, vertical and horizontal; Urbane II vertical and horizontal |
| Nero | Gun Metal, and Graphite | Mecca 7 bar ladder, Mecca and Bianca singles |
| Thermogroup | Gun Metal | 4 Bar and 7 Bar ladders, 12V and 240V verticals, 12V single |
| Fienza | Gun Metal | Kaya 4, 6 and 9 bar ladders |
| Phoenix | Brushed Carbon | Round, square and triple rails; Wiltern, Five Flat Bar and Radii ladders |
If the tapware is from one brand, a rail from the same brand is the safest match. The black heated towel rails, brushed nickel heated towel rails and chrome heated towel rails collections hold the neighbouring finishes.
Plug-in or hardwired
| Rail | Plug-in or hardwired |
|---|---|
| Phoenix Wiltern, Five Flat Bar and Radii ladders (240V) | Hardwired or plugged in, cable through the bottom right vertical tube |
| Thermogroup 4 Bar and 7 Bar ladders (240V) | Multiflex wiring, hardwired or plugged in |
| Caroma Liano II ladder (230 to 240V) | Concealed hardwired or exposed plug-in, wiring at any of the four fixing posts |
| Nero Mecca ladder and singles (240V) | Concealed hardwired wiring, 1.5 metre power cord |
| Fienza Kaya ladders | Concealed hardwired only |
| 12V rails (Phoenix, Thermogroup, Caroma) | Hardwired only, with a transformer |
A rail that is hardwired needs an electrician. A rail that plugs in needs a power point within reach of the lead. The 240V heated towel rails and 12 volt heated towel rails collections hold the mains-powered and transformer-powered rails.
Gunmetal ladders
| Ladder | Size | Power and rating |
|---|---|---|
| Fienza Kaya 4 bar | 600mm by 450mm, 100mm deep | 230V, 47.5 watts, IP55 |
| Thermogroup 4 Bar | 550mm wide | 240V, 41 watts, IP55 |
| Phoenix Wiltern | 575mm by 750mm, 111mm deep | 240V, 35 watts, IPX4 |
| Phoenix Five Flat Bar | 550mm by 740mm | 240V, 35 watts, IPX4 |
| Phoenix Radii | 750mm by 740mm | 240V, 62 watts, IPX5 |
| Fienza Kaya 6 bar | 600mm by 800mm | 230V, 75 watts, IP55 |
| Nero Mecca 7 bar | 600mm by 800mm, 122mm deep | 240V, 80 watts, IP55 |
| Caroma Liano II 8 bar | 632mm by 900mm, 116mm deep | 230 to 240V, 68 watts, IP55 |
| Fienza Kaya 9 bar | 600mm by 1200mm, 100mm deep | 230V, 110 watts, IP55 |
A ladder gives a towel more contact with the heated bars than a single bar does, so it dries and warms a towel better. More bars means more hanging space, but output does not rise in step with the bar count: the Phoenix Wiltern draws 35 watts and the Radii draws 62.
Single bars in gunmetal
A single bar is one heated bar, so use one bar per towel, and fit two or three side by side if more towels hang at once. The Caroma Liano II and Urbane II bars are 12V, with the vertical at 900mm or 1000mm high and the horizontal 640mm long. A 72W Caroma transformer serves one to three rails, and Caroma recommends two or three horizontal rails to optimise heating. The Nero Mecca and Bianca singles are 240V, 632mm long, 15 watts. The Phoenix 12V round and square rails are 600mm and 800mm at 35 watts. The Meir rail is 1000mm high at 23 watts. The single bar heated towel rails collection holds every single bar.
How hot a rail gets
The Fienza Kaya ladders run between 35 and 60 degrees, and the Caroma rails run at 40 degrees, give or take 5, in a 22 degree room. A vertical Thermorail heats to around 35 degrees, and a towel placed over the bars lifts the temperature under the towel to between 50 and 55 degrees. That is enough to dry a towel and keep it warm. A heated towel rail is not a radiator, so a bathroom that needs warm air also needs a ceiling heater or underfloor heating, which the bathroom heating and ventilation collection covers.
Installing the rail
Have a qualified electrician install and test the rail. For a Thermogroup ladder, mount it on a flat wall at least 600mm above the floor, with 300mm clear of permanent fixtures. Screw into studs where possible, use anchors on a hollow wall, and protect the rail with a suitably rated RCD circuit. Fit any timer or switch in the zone that suits its IP rating. Set out the holes from the fixing distance, not the overall width: the Caroma Liano II ladder is 632mm wide with fixing centres 600mm across and 700mm down.
What a gunmetal rail uses
Divide the rail's wattage by 1,000, then multiply by the hours it runs. A 15 watt single bar running six hours a day uses 0.09 kilowatt-hours. A 35 watt Phoenix rail uses 0.21, an 80 watt Nero ladder uses 0.48, and the 110 watt Kaya nine bar uses 0.66. Left on for 24 hours the 80 watt ladder uses 1.92 kilowatt-hours, four times as much. A rail should not run constantly, because heat builds up under the towel. A timer keeps the running hours to the ones that count, and the controllers and thermostats and Thermogroup timers and thermostats collections hold timers that match the rail. Phoenix 12V rails have an integrated switch on the rail.
Caroma gunmetal rails
Caroma Liano II and Urbane II rails are 304 stainless steel with an IP55 rating. The 12V rails need a transformer, which is sold separately: the matching 12V 72W transformer serves one to three rails, and the wiring is concealed and hardwired by a licensed electrician. The Liano II vertical includes a removable double towel hook, and the Liano II horizontal wires through the left or right mounting post. The 8 bar Liano II ladder is a 230 to 240V rail with a 1.4 metre lead, and it can be hardwired or plugged in.
Nero gun metal rails
The Nero Mecca 7 bar ladder can be surface mounted or recessed, with the power cable connecting from the left or the right and the wiring at the top or bottom mounting position. The fixing distance is 568mm across and 600mm down. The Mecca and Bianca singles have Multiflex concealed hardwired wiring, with a connection wire leg kit and a 1.5 metre power cord in the box. The Bianca is 632mm by 40mm and projects 70mm from the wall, and the Mecca single projects 90mm.
Fienza gun metal rails
The Fienza Kaya is a round bar ladder in 4, 6 and 9 bars at 600mm wide, with a surface temperature between 35 and 60 degrees. The wiring is concealed and hardwired, at the top right or the bottom left mounting position, so it needs an electrician.
Phoenix brushed carbon rails
The Phoenix round and square rails are 12V, 35 watts and IPX5. They have an integrated on and off switch on the rail, mount vertically or horizontally, and are hardwired by a licensed electrician, with the cable leaving through the bottom mount and a transformer in the box. A matching vertical rail hook lets one rail carry two towels. The Wiltern, Five Flat Bar and Radii ladders are 240V, and the Radii 750mm comes with both a square and a round backplate.
Which gunmetal rail suits which wall
- A small space or one towel: the Fienza Kaya 4 bar, or the Thermogroup 4 Bar at 550mm.
- A standard bathroom wall: the Nero Mecca 7 bar or the Fienza Kaya 6 bar at 600mm by 800mm, or the Caroma Liano II at 632mm by 900mm.
- A tall wall: the Fienza Kaya 9 bar at 600mm by 1200mm.
- A narrow wall: a Caroma, Thermogroup or Phoenix vertical bar.
- A low wall: a Nero or Caroma horizontal bar, or a Phoenix rail mounted horizontally.
Timers and switching
Phoenix 12V rails have an integrated switch on the rail. The 240V ladders and the Nero and Caroma rails need a wall switch or a timer, so decide where it will sit before the wiring is planned, because a timer or switch needs its own position on the wall. The Thermogroup Eco Timer sits behind the switch plate and runs a 12-hour schedule, for 1 to 11 hours at 50, 75 or 100 per cent heat. The TRTS touchscreen timers let you program each day on its own, set all seven days the same, or set one schedule for weekdays and another for the weekend, with a manual override for drying clothes.
Sizing the rail to the wall
Measure the wall before the rail. Overall size is the footprint on the wall, and the fixing distance is the distance between the mounts. They are different numbers. Leave clear wall above and below the rail so air moves around the towels, and check the lead length against the distance to the connection point: 1.4 metres on the Caroma ladder, 1.3 metres on the Phoenix 12V rails and 1.5 metres on the Nero rails.
Care
Clean the rail with a soft cloth and a non-abrasive cleaner, because harsh scrubbing and acid cleaners mark the surface. Do not hang anything on the rail that has been in contact with oil, petroleum products or dry cleaning fluids. A rail is hot to the touch, so supervise young children near it.
Where to go next
The heated towel rails collection compares every finish, size and voltage together.

