Fluted basins buying guide
A fluted basin has ribbed, vertical grooves around the outside or the rim, which gives a plain bowl a textured, tactile finish. This page holds fluted basins from Otti, Fienza, ADP, Timberline and Bao, mostly above counter, with a wall hung concrete basin, in ceramic, solid surface and concrete, in round, oval, arch and square shapes. The guide below covers what fluting is, how to clean it, the sizes, and the tap position, overflow and waste to check.
What a fluted basin is
Fluting appears in a few ways. The Otti Oxford and Archie have a French fluted design, with a delicate ribbed detail along the circumference or a ribbed, arch-shaped interior. The ADP basins have fluted edges and pair with a Hamptons style bathroom. The Timberline Allure Flute has a fine fluted profile around the outer edge, and the Timberline Oval Flute is a soft pill shape with a fine fluted profile. A fluted round basin gives a 360 degree view and a tactile finish.
Are fluted basins hard to clean
The grooves are the cost of the texture. Dust and soap scum collect in the grooves, so a fluted basin needs more detailed cleaning than a smooth one. Wipe ceramic with a soft cloth and a weak non-abrasive detergent and dry spills, and avoid scourers in the grooves, because a scratch in glazed ceramic cannot be repaired. For a fluted concrete basin, the care rules on the concrete basins page apply: a pH-neutral cleaner, no acids or abrasives, and a surface kept sealed. If the bench is a busy family one, a smooth ceramic basin is the easier option, and if the basin is the feature, fluting is worth the extra minute of cleaning.
Fluted basin shapes
The fluted range includes round, oval and pill, arch and square shapes. The Otti Oxford is a 395mm round, the Otti Hudson comes as a 400mm round, a 520mm by 320mm square and a 600mm by 320mm oval, and the Bao Fluted Round is 400mm across. The Otti Archie is an arch shape that is 415mm by 365mm and 100mm high. The ADP range has a Round Fluted that is 405mm across with a 7.5 litre bowl. The Arch Fluted is 410mm by 365mm with an 8 litre bowl, and the Pill Fluted is 580mm by 360mm with a 10.5 litre bowl, each 100mm high. The Otti Havana is a 480mm by 345mm oval in solid surface, and the Timberline Oval Flute is 490mm by 310mm. See pill shape basins for the elongated forms.
Above counter or wall hung
Most fluted basins here are above counter basins, which sit on the bench and take a tall basin mixer or a wall mixer. The Fienza Valentina is a concrete fluted arch wall hung basin, 465mm by 360mm and 119mm high with a 10.5 litre bowl, in warm white, warm grey, sage and tuscan. It comes with extra heavy duty mounting brackets and bolts, and wall hung basins need fixing to a support beam fitted between the studs, with noggins added before the wall is sheeted.
Tap position
No fluted basin on this page has a tap hole, so the mixer sits on the bench behind the bowl or on the wall. Otti publishes a drilling note for the bench. The Oxford and Archie are compatible with a tap at 10 o'clock or 2 o'clock, or none for wall tapware, and are not recommended with a 12 o'clock tap. The Hudson is compatible with a 12 o'clock tap or none, and is not recommended with a 10 or 2 o'clock tap. Plan the tapware before the bench is drilled. See basin mixers.
Overflow, plug and waste
The Otti fluted basins have no overflow, with a pop-up waste sold separately. ADP, Bao and Timberline basins are sold with the plug and waste separate, and the Timberline Allure pairs with a matching waste in matte or gloss white. The Fienza Valentina has no overflow and needs a 32mm non-overflow waste, which is not included. A ceramic basin's waste is tightened by hand only, with a foam washer sealed with neutral cure silicone. See basin wastes.
Materials and finishes
The Otti, ADP, Timberline and Bao fluted basins are ceramic, the Otti Havana is solid surface and the Fienza Valentina is concrete with a food-grade nano sealant. The finishes are gloss white and matte white, with matte black and matte pink from Otti and warm grey, sage and tuscan from Fienza. The Bao Fluted Round matches the Bao fluted baths, and the site also carries fluted vanities and fluted baths.
Outside ribs or inside ribs
Where the fluting sits changes the cleaning. On many fluted washbasins the ribs and furrows are on the ceramic exterior while the interior surface is completely smooth, which makes it easy to clean. The Otti Oxford is a French fluted design with a ribbed detail along the circumference, and the Timberline Allure Flute and Oval Flute carry a fine fluted profile around the outer edge. The Otti Archie, by contrast, has a ribbed arch-shaped interior. So a smooth bowl inside is common on a fluted basin but not certain. Check the photos for the bowl you choose.
Cleaning the grooves
The routine is simple. Wipe the basin after use with a dry cloth, clean regularly with a mild non-abrasive product, work the grooves with a soft-bristle brush, and rinse and dry. Soap scum forms from soap, water and minerals in hard water, and a mild non-abrasive cleaner used regularly breaks it down without damaging the surface, with a soft brush or sponge for build up. A scratch in glazed ceramic cannot be repaired, which is the reason to avoid scourers and hard bristles in the grooves. A fluted solid surface or concrete basin follows the rules for its material, and the concrete rules rule out acids and abrasives. A smooth basin is quicker to clean, so fluting is a trade of extra minutes for a texture that catches the light.
Bowl volumes and heights of fluted basins
Most of the fluted basins have a published bowl volume. The ADP Round Fluted holds 7.5 litres, the Arch Fluted 8 litres and the Pill Fluted 10.5 litres, each 100mm high. The Bao Fluted Round holds 15 litres, and the Fienza Valentina concrete arch wall basin holds 10.5 litres at 119mm high. The Otti and Timberline basins have no published volume. A capacity can be measured to the rim or to the overflow, so ask which figure applies. Check the height too. An above counter basin adds its height to the bench, and a 100mm bowl lifts the rim less than a 150mm one.
Floor-mounted vanities run at 850mm to 900mm and wall-hung vanities at 800mm to 900mm, with a depth of 460mm to 550mm, and the rim is usually set at 800mm to 850mm. Accessible design puts the rim at 800mm to 830mm. Take the basin height, add it to the bench height, and compare the total with the rim height you want.
Tapware for a fluted basin
No fluted basin on this page has a tap hole, so the mixer sits on the bench behind the bowl or on the wall. Tall mixers suit above counter basins, with extra height and spout clearance to reach over higher rims and reduce splashing. The spout should clear the rim by about 100mm to 150mm and the water should land at or slightly forward of the drain centre. For reference, two tall mixers on the store list a spout height of 216mm with a reach of 170mm, and 244mm with a reach of 180mm. Check that the handle opens freely against the wall or the splashback. See basin mixers.
Fluted tapware handles exist, so a fluted basin can be matched with a fluted handle if the same look is wanted through the room. Keep the metal finishes consistent across the basin mixer, the shower and the accessories.
Choosing a finish for a fluted basin
The fluted basins here come in gloss white and matte white, with matte black and matte pink from Otti and warm grey, sage and tuscan from Fienza. Light, shadow and texture work together on a fluted surface, so the finish changes the look. A matte surface hides water spots and fingerprints better than gloss, but residue can build up unseen, and matte white wants soft cloths and no hard pressure. A gloss surface wipes clean faster and shows every drop. On a fluted basin, the grooves hold the drops either way. See matte white basins, black basins and pink basins for the care on each finish.
Fitting a fluted bench basin
Most fluted basins on this page are above counter basins with no tap hole and a separate pop-up waste. Tighten the waste by hand only, with a foam washer under the waste neck sealed with neutral cure silicone, because over-tightening stresses the basin. The Otti basins need a 32mm pop-up waste sold separately, the Timberline Allure pairs with a matching waste in matte or gloss white, and the Fienza Valentina needs a 32mm non-overflow waste that is not included. Water connections need a licensed plumber, and the plumbing positions should be checked against the product before it is fixed.
For the bench, no cut-out is needed for an above counter basin, but the basin needs a flat, level, fully supported surface. Set the tap behind the bowl and leave room at each side. A bowl crowded to the edge of the vanity looks awkward and is harder to use. See above counter basins.
Brands on this page
Browse Otti basins, ADP basins, Timberline basins, Fienza basins and Bao basins for the full ranges.
How to choose
- Decide whether the texture is worth the extra cleaning in the grooves.
- Choose the shape and the size for the bench, with room for the mixer behind the bowl.
- Read the tap position note and plan the mixer before the bench is drilled.
- Read the overflow and plug and waste lines, because they differ between makers.
- Choose the material and finish with the tapware.
The bathroom basins page sets fluted basins beside the other shapes and finishes, and bathroom vanities covers the cabinets that carry the bench.

