Skip to content

Freestanding Basins

3 Items

  • $652 Off RRP
    Caroma Contura II 530mm Freestanding Basin - Matte Clay

    Caroma Contura II 530mm Freestanding Basin - Matte Clay

    Checking delivery...
    $2,876
    $652 (-18%) OFF RRP of $3,528
    $652 (-18%) off RRP of $3,528
  • $1,082 Off RRP
    Caroma Contura II 530mm Freestanding Basin - Matte White

    Caroma Contura II 530mm Freestanding Basin - Matte White

    Checking delivery...
    $2,299
    $1,082 (-32%) OFF RRP of $3,381
    $1,082 (-32%) off RRP of $3,381
  • $941 Off RRP
    Caroma Contura II 530mm Freestanding Basin - White

    Caroma Contura II 530mm Freestanding Basin - White

    Checking delivery...
    $1,999
    $941 (-32%) OFF RRP of $2,940
    $941 (-32%) off RRP of $2,940

Freestanding basins buying guide


A freestanding basin stands on the floor on its own, with no vanity, bench or wall cabinet around it. This page holds the Caroma Contura II 530mm freestanding basin in White, Matte White and Matte Clay. The guide below covers what the term means and how it differs from a pedestal basin and a console. It then gives the numbers for the basin on this page, where the waste and trap have to sit, and how the basin is fixed to the floor. Last come the taps that suit a basin with no tap hole, its height against common rim heights, and how to clean it.

What a freestanding basin is called, and what it is not

People search for this product as a freestanding basin, a free standing basin, a freestanding sink or a stand alone basin. A freestanding basin is a full floor-standing fixture and is often more sculptural. A pedestal basin sits on a narrower pedestal that hides the plumbing. A single-piece freestanding basin gives you the column and the bowl in one block. Some products sold as freestanding include pedestals, so check the product details before you buy.

Three types get mixed up, and the differences are practical. A pedestal basin has a bowl and a separate column, and the column conceals the waste pipe and supply pipes. The word pedestal is also used for a wall-mounted basin with a partial shroud that stops short of the floor, and that type needs a wall rated for more than 150kg. A console basin has open legs, is usually fixed to the wall and may stand on legs, so it shows the pipework. A freestanding basin is one floor-standing piece that carries its own weight. The basin on this page is the last kind, and it is fixed to the floor, not to the wall.

Buyers also ask what the difference between a basin and a sink is. Sink is the everyday word, and basin is the bathroom fixture. The product title says basin, so this page does too. If you are comparing other mounting types, see wall hung basins, above counter basins and consoles.

The basin on this page

The Caroma Contura II 530mm freestanding basin is ceramic. The overall height is 900mm, the overall length is 530mm and the projection from the wall is 380mm. It has a thin rim, a smooth stain resistant surface and no overflow. A flush-fitting plug and waste is supplied, and it is also compatible with the Urbane II basin pop-up plugs and wastes. The box holds the basin and the installation instructions. The range is Australian designed and engineered.

It comes in White, Matte White and Matte Clay. The Matte Clay is a natural clay colour and the other two are white. The projection of 380mm is the part that matters for a small room: the basin stands 380mm out from the wall, where a vanity depth of 460 to 550mm is usual, and the 530mm length is the width it takes along the wall. See Caroma Contura II basins for the rest of the range and Caroma basins for the brand.

If you need the bowl capacity, weight or bowl depth for a decision, ask us before you order, and do not assume it from the footprint.

How a freestanding basin is fixed to the floor

The steps for fixing this basin differ from a wall hung or bench basin, so they are worth knowing before you choose.

  • Fit the basin waste to the basin, then position the basin against the wall over the waste.
  • Trace the basin fixing holes on the floor, and trace the foot print too so the basin can be put back in the same place. Then move the basin away from the wall.
  • Do not use the basin screw holes as a guide for drilling, because this may crack the basin.
  • Drill holes at the marked positions for the plastic plugs supplied, fit the plugs and tap them flush or just below the floor surface.
  • Connect the trap and the waste as set out above, with the basin pulled off the wall to reach the connection.
  • Check the bedding area is clean and free of building material. Place spacers about 2 to 5mm high inside the traced footprint, lift the basin onto them and push it against the wall.
  • From the fixing kit, fit the two bushes into the fixing holes, insert the screws and tighten. Over-tightening these screws may crack the basin. Then fit the two blanking caps over the screws.
  • Run a bead of acetic cured silicone sealant around the foot and the back of the basin, leaving a 15mm gap in an inconspicuous position for leak detection. Remove the spacers and fill the gaps with silicone.
  • Clean off excess sealant and let the silicone set for at least 24 hours before use.

Have the work done by a qualified plumber. Local authority, water board and building regulations may apply, and installation must be in accordance with AS/NZS 3500.2. All measurements are subject to accepted manufacturing tolerances, so check the actual product dimensions before drilling. Two details stand out. The basin is fixed to the floor with two screws, so the floor has to take plugs, so your plumber should check the floor before the day. And the 15mm gap in the silicone is deliberate: a leak at the waste then shows at the gap and does not run under the basin out of sight.

No tap hole, so choose the tap first

This basin has no tap hole. That means the taps go on the wall or on a tall fitting that does not need a hole in the bowl. Freestanding and pedestal basins often need wall-mounted or tall deck-mounted mixers so the spout reaches over the bowl, so check the spout reach and tap hole layout before buying. Wall-mounted taps need earlier plumbing planning, which is the same point seen from the other side.

With a basin that stands 900mm tall, a wall-mounted mixer or a wall spout and handles is the cleaner answer, because it avoids a floor-standing tap. The height of the wall tap has to clear the rim, and the spout has to reach over the bowl, so measure the projection of the spout against the 380mm projection of the basin before you set the rough-in. Fix the tap position when the wall is open. See basin mixers and basin wastes for the fittings, and keep in mind that this basin comes with its own plug and waste.

Height, clearance and where it fits

The overall height of this basin is 900mm. Rim heights for basins in general sit below that: about 810 to 850mm from the finished floor, adjustable for the user, with 800 to 850mm as a starting point. A floor-mounted vanity sits at 850 to 900mm, and an accessible rim at 800 to 830mm. The 900mm figure is the overall height of the basin and not necessarily the rim, because a freestanding basin has a bowl and a body below it, so confirm the rim height with us before you decide who it suits.

For clearance, leave at least 600mm of clear space in front of the basin, and plan a circulation space of 900 by 1200mm for an accessible bathroom. With a 380mm projection, the basin takes less depth than a vanity, which is why people pick it for a powder room or a narrow ensuite. Measure the door swing and the toilet position first, then place the basin. See small basins if the space is tight and you want to compare footprints.

Other freestanding materials

This page holds a ceramic basin. Freestanding basins come in vitreous china, solid surface, stone composite, concrete and ceramic, and each differs in durability, finish, weight and maintenance. Shapes include cylindrical, rectangular or square and organic. Concrete freestanding pedestals and modular cylinders come in 29 colours. Check sizes, tap holes and care on each product before you compare them in detail.

If you want a different material, see concrete basins and solid surface basins for what the store carries. Care and weight differ, so read each product page. For a white ceramic look in other mounting types, see ceramic basins, white basins and matte white basins.

Who a freestanding basin suits, and who it does not

A freestanding basin suits a room where you want the basin to be the object. Freestanding basins remove the need for a large vanity. That frees the wall and the floor around it, and it suits a powder room or a feature wall. The thin rim and the single-piece form are the visual points of this model.

Three limits are worth stating. There is no storage, because there is no cabinet. There is no bench, so soap, a cup and a toothbrush need a shelf on the wall. And the plumbing has to be right where the basin stands, because the waste position is fixed by the set-out above, so a new location in an existing room can mean opening the floor or the wall. If you want storage, look at bathroom vanities or at other basin types.

Questions buyers ask

Does a freestanding basin need a vanity?

No. The basin is a complete floor-standing fixture and carries its own weight. It is fixed to the floor with two screws and sealed at the foot.

Does the Contura II freestanding basin have an overflow?

No. The basin has no overflow, and the flush-fitting plug and waste supplied with it suit that design.

Can I fit a mixer on the basin?

No. There is no tap hole, so the tap goes on the wall. Choose a wall-mounted mixer or a spout with separate handles, and set the rough-in before the wall is lined.

What warranty does the basin carry?

The Caroma Contura II freestanding basin carries a 20 year warranty. Keep your invoice with the installation record.

Is it suitable for a small bathroom?

Yes. At 530mm long and 380mm out from the wall, it takes a small footprint. Check the door swing and the clearance in front before you fix the position. For other compact options, see small hand basins.

Frequently Asked Questions

What is a freestanding basin?

A freestanding basin is a basin unit mounted on a pedestal, column, or exposed stand that supports it from below, with no wall cabinet or vanity behind it. The plumbing may be exposed (as a design feature) or partially concealed within the pedestal. Freestanding basins are a statement piece, often used in powder rooms or feature bathrooms where design impact takes priority.

Do freestanding basins provide storage?

Most freestanding basins offer little to no built-in storage, which is why they're most commonly used in powder rooms or secondary bathrooms where daily storage needs are minimal. If storage is important, pair a freestanding basin with a nearby wall-mounted cabinet, tallboy, or open shelving unit.

Are freestanding basins practical in a family bathroom?

Freestanding basins are better suited to powder rooms or single-person ensuites than to busy family bathrooms. The lack of a benchtop and limited storage can be a practical disadvantage. However, in the right setting, a freestanding basin is one of the most striking bathroom design choices available.