Momo Handles Belgravia: solid brass pulls and knobs in plain, lined and knurled
Momo Handles Belgravia is a range of solid brass cabinet handles with a slim, straight profile. It is made in three textures, plain, lined and knurled, and in three forms: a slim pull handle, a round knob and a T knob, plus a long 800mm knurled pull for large doors. The brass is plated and lacquered in a run of finishes, from matte black to brushed satin brass, so one design can cover the kitchen, the vanity and the wardrobe.
People search for it as Momo Belgravia, Momo Belgravia handles, Belgravia handles and Belgravia brass handles. This page sets out the forms, the sizes, the textures and the finishes, and the measurements that decide whether a handle fits your doors. For the wider choice of handles, see cabinet handles and cabinet knobs.
The three Belgravia textures
The texture changes how the handle feels and how it looks. The plain handle is a smooth brass bar and gives the cleanest, most minimal look. The lined handle has fine parallel lines cut along the face, which adds subtle character while staying quiet. The knurled handle has a fine diamond texture over the surface, which gives a firmer grip and visual interest, and it feels different in the hand because of it.
| Texture | Look | Best for |
|---|---|---|
| Plain | Smooth and minimal | A kitchen or vanity with plain doors where the handle should be quiet |
| Lined | Fine parallel lines | A door that suits a little detail without a strong pattern |
| Knurled | Textured, firmer grip | Drawers and doors you pull often, and a room where the handle is meant to be noticed |
Choose one texture for a room. Mixing plain and knurled on neighbouring doors reads as two decisions. The finish and the size are the other two choices, and they are set out below.
Forms and sizes
The pull handle is a slim bar with two fixing points. It is made in two sizes: 241mm overall with a 160mm fixing distance, and 404mm overall with a 320mm fixing distance. Both are 14mm wide and project 38mm from the door. The round knob is 35mm across and the T knob is 82mm long, and both project 38mm. The long pull is 882mm overall with an 800mm fixing distance and a 54mm projection, and it suits a tall door, a pantry door or a wardrobe.
| Handle | Overall length | Fixing distance | Projection |
|---|---|---|---|
| Pull handle, small | 241mm | 160mm | 38mm |
| Pull handle, large | 404mm | 320mm | 38mm |
| Round knob | 35mm | Single hole | 38mm |
| T knob | 82mm | Single hole | 38mm |
| Knurled pull, long | 882mm | 800mm | 54mm |
The fixing distance is the number to measure on the door, not the overall length. Measure between the centres of the two holes that are already drilled, then match that to the handle. A 160mm pull replaces a 160mm pull. If you are drilling new holes, mark the centres and drill with the door flat. A knob needs a single hole and no matching, which makes knobs the easy choice on a drawer or a small door.
Door and drawer thickness
The Belgravia handles are made for a cabinet thickness of 16mm to 25mm, which covers most kitchen, vanity and wardrobe doors and drawer fronts. Measure the thickness of the door before you order. Screws are included with each handle, and each handle is sold on its own, so order one for each door or two for a double drawer.
Finishes
The brass is plated and lacquered, so the finish is applied over a solid brass body. The finishes are matte black, brushed satin brass, dark brushed brass, bronze, dark bronze, dull brushed nickel, polished nickel and brushed nickel. Matte black is flat and strong against pale cabinets. Brushed satin brass is a soft, warm gold tone, and dark brushed brass is a deeper version of it. Bronze and dark bronze are warm and dark and suit timber and stone. Brushed nickel and dull brushed nickel are soft silvers, and polished nickel is bright and reflective.
| Finish | What it suits |
|---|---|
| Matte black | Pale cabinets, black tapware and black window frames |
| Brushed satin brass | White and cream cabinets, warm timber, brass tapware |
| Dark brushed brass | Dark joinery, where a lighter brass would look bright |
| Bronze and dark bronze | Timber, stone and darker kitchens |
| Brushed and dull brushed nickel | Stainless appliances, chrome and brushed nickel tapware |
| Polished nickel | A bright, traditional or classic room |
Not every texture and form is made in every finish, so check the finish against the exact handle before you plan a run of cabinets. Keep one finish on the doors and drawers in a room, and match it to the tapware where the two are in view together. For brass pieces, see brushed brass cabinet handles.
Choosing a handle for each use
| Where | Choose | Reason |
|---|---|---|
| Kitchen drawers and base cabinets | Pull handle, 160mm or 320mm | Easy to grip with a full hand; the 320mm suits wide drawers |
| Overhead cupboards and small doors | Round knob or T knob | A single fixing point, small and quiet |
| Pantry, wardrobe or tall door | Long knurled pull, 800mm | The length reaches the height of a tall door |
| Vanity drawers | Pull handle, small | Matches the proportion of a vanity drawer |
A run of cabinets can mix the forms, as long as the texture and the finish stay the same. Pulls on the drawers, knobs on the doors and a long pull on the tall unit is a common pattern, and the shared texture and finish hold the room together.
Choosing a pull size
A common rule is that a pull should be about a third as long as the drawer front is wide. A drawer 600mm across takes a pull near 200mm, so the 241mm pull with a 160mm fixing distance suits a drawer from about 450mm to 700mm wide, and the 404mm pull with a 320mm fixing distance suits a wider drawer. For a very wide drawer, two pulls can replace one long one. A standard door takes a smaller pull or a knob, so the round knob and the T knob suit doors and the small drawers in a vanity.
Where a handle sits matters as much as its size. A pull or a knob sits 40mm to 60mm in from the edge that opens, near the bottom corner of an upper door and the top corner of a lower door. Pulls run horizontally on drawers and vertically on doors. To test a size before you buy, cut a strip of tape to the length of the handle and stick it on the cabinet for a day.
Solid brass
Brass is an alloy of roughly two thirds copper and one third zinc, and it is heavier than zinc alloy or aluminium at the same size. The weight is the first thing people notice when they pick up a Belgravia handle, and it is part of why the handle feels solid on a door. Brass changes colour with exposure, because copper reacts with air and moisture. A lacquered finish holds the colour as it was made, so Belgravia is plated and lacquered to keep the finish even over time.
Replacing handles
When you swap an old handle for a Belgravia handle, match the fixing distance. A new pull with the same distance as the old one drops into the existing holes without drilling. Measure from the centre of one screw hole to the centre of the other. If the old holes are on another distance, you will need to fill them or drill new ones, and a filled hole shows unless the door is repainted. A knob needs only one hole, so replacing a pull with a knob leaves one old hole unused and one to fill.
Handles in a bathroom
Bathroom fittings need wiping and drying more often than those in other rooms, because steam and moisture leave marks. Solid brass is a sound choice in a humid room, and a lacquered finish adds a layer of protection. Keep the handles on a vanity dry after use, and wipe the grip area, since that is where the hand lands every day.
Caring for lacquered brass
Do not use brass polish on a lacquered handle, because polish strips the clear coat and leaves patches. Use a soft cloth with mild soapy water and wipe the handle dry. Put the cleaner on the cloth and not on the hardware, and dry the handle straight away so water marks do not form. Keep abrasive pads, powdered cleansers, ammonia, bleach and alcohol based disinfectants away from the finish. A coating wears first where the hand lands, so wipe the grip area more often than the rest.
Belgravia door hardware
The Belgravia name also covers door hardware, which is sold in separate collections. For door levers and door pulls in the same design, see Momo Handles Belgravia door hardware and Momo Belgravia knurled door pull handles. Choose the cabinet handles and the door hardware in the same finish so the doors and the cabinets in a room read as one set.
Before you order
Measure the fixing distance between the holes on the door and match it to 160mm or 320mm, or choose a knob for a single hole. Measure the door thickness against the 16mm to 25mm range. Choose one texture and one finish for the room, and confirm the finish is made for the exact handle you chose.


