Momo Strano Cabinet Handles Buying Guide
The Strano is a slim zinc alloy range from Momo with a D handle and a 60mm T knob. It is a contemporary twist on a classic. Both pieces come in Antique Brass, Brushed Satin Brass, Dull Brushed Nickel, Matte Black, Matte White and Polished Nickel. The page covers what each piece measures, how a D handle and a T knob differ, and what each finish is. The page also explains how zinc alloy with an electroplated finish behaves, and how to size, fit and clean the range. For the whole brand, start at Momo cabinet handles.
What a D handle is
A D handle is a cabinet pull with a curved, D-shaped profile that curves away from the cabinet face and back again. The shape is comfortable to grip and easy to use on drawers and doors, and it works in modern, transitional and traditional kitchens and bathrooms. D handles are simple and practical, easy to grab and easy to clean. See D shaped cabinet handles for the full group.
The pieces, measured
The Strano D handle comes in two sizes. The 160mm size is 200mm overall, and the 320mm size is 360mm overall. Both are 11mm wide and project 34mm. The fixing distance is the gap between the two screw holes, measured from centre to centre, so each size runs 40mm longer than its holes. The T knob is 60mm long, 11mm wide and projects 34mm, and it fixes at one point.
The pieces share the same width and projection, so a run of drawers and doors keeps a consistent depth. Screws are not included. Screw length depends on the panel: 22mm for panels 16mm to 18mm thick, and 38mm for panels 32mm to 34mm thick. The screw must bite into the handle and stop short of the door face. The cabinet thickness is 16mm to 25mm.
When you replace a handle, measure the distance between the screw holes and match it to the fixing distance, not to the length of the old handle. A 128mm handle will not fit 160mm holes without new holes, so a 160mm Strano D handle only drops into holes spaced at 160mm.
Centre against overall length
The centre-to-centre figure can be as little as 9mm under the overall length on a tight D handle, and 80mm to 90mm under on a long tapered bar. The Strano sits between them, with ends 20mm past each hole. Common spacings such as 96, 128, 160, 192, 224 and 320mm are multiples of 32mm, and handles made to imperial sizes, such as 102mm or 152mm, will not match holes drilled on the 32mm grid. Both Strano centres, 160mm and 320mm, sit on that grid.
Choosing a size
A sizing table helps. A standard drawer 450mm to 600mm wide takes a 128mm to 160mm centre, and a wide drawer of 600mm to 900mm takes 256mm to 320mm, or two 128mm pulls. A standard door takes a 96mm to 128mm pull or a knob, and a tall pantry door of 600mm and above takes two 256mm pulls. The one-third rule: a pull about a third as long as the drawer front is wide, so near 200mm for a drawer 600mm across. The 200mm Strano D handle on a 160mm centre is the exact size for that drawer, and the 360mm size on a 320mm centre suits a drawer of 900mm to 1000mm. The rule is a rule of thumb and not a strict rule.
A pull or knob sits 40mm to 60mm in from the edge that opens, near the bottom corner of an upper door and the top corner of a lower door. Pulls run horizontally on drawers and vertically on doors. To test a size before you buy, tape a strip cut to the handle's length onto the cabinet and live with it for a day.
T knob or D handle
Knobs take the fingers and a single screw and suit small doors and drawers, while pulls take the whole hand. A pull is gripped with three or four fingers, which makes it the better choice for heavy drawers and for children and older people. Most cabinet knobs run roughly 25mm to 38mm across, so the 60mm T knob is longer than a round knob and gives a longer grip. It suits a small door or a narrow drawer. See cabinet knobs.
Zinc alloy in a handle
Zamak is a zinc-based alloy with aluminium, magnesium and copper. It is mostly die-cast, and it can be electroplated, wet-painted and chromate-conversion-coated well. The Strano is zinc alloy with an electroplated finish, and the grade and the plating metal are not named. A die-cast zinc handle depends on its finish for corrosion protection. Thin electroplated zinc alloy can fail within a few years in a shower splash zone. Indoors, away from direct splash, it is a normal material. See zinc alloy cabinet handles for the material in full.
The six finishes
- Antique Brass is an aged, warmer gold, and it suits traditional rooms. See antique style cabinet handles.
- Brushed Satin Brass is a soft, even gold, matte and subtle, and it suits minimalist or Scandinavian kitchens. See brushed brass cabinet handles.
- Dull Brushed Nickel is a soft, cool grey: a metallic silver with a slight warm grey undertone and a low satin sheen that disguises fingerprints. See brushed nickel cabinet handles.
- Polished Nickel is brighter. It has a warmer golden undertone that keeps a white kitchen from feeling sterile, but unless it is lacquer coated it tarnishes over time, especially in humid places.
- Matte Black is non-reflective, and it hides fingerprints better than a polished finish. See black cabinet handles.
- Matte White blends into a white cabinet. Crisp white shows dirt and needs more cleaning than chrome or brushed nickel, while white handles often have matte or satin finishes that resist fingerprints. See white cabinet handles.
Treat the Strano finishes as coated, and avoid abrasive cleaners and brass polish. The rule for mixing is to keep a room to two metals and repeat each at least twice so it reads as a decision. Mixing nickel with brass accents works.
Matching the Strano to the door style
Handle types pair with kitchen styles. Contemporary and minimalist kitchens go with matte black or brushed nickel pulls, and Japandi and Scandi kitchens with timber and brushed nickel. Hamptons and coastal kitchens go with D-pulls or cup pulls in brushed nickel, brushed brass or chrome. Shaker kitchens go with cup pulls, bin pulls or knobs in brushed brass, antique bronze or matte black, and heritage kitchens with antique bronze or aged brass and period knobs. The Strano D handle in Brushed Satin Brass or Dull Brushed Nickel sits in the Hamptons and coastal note, and in Matte Black it sits in the contemporary note. Matt black works against light cabinetry as a contrast, and gold, brass and bronze tones pair with navy, charcoal, blue or green cabinetry. These matches are guidance and not rules.
A brass-coloured T knob is not a solid brass one
A brass T knob is a common search. The Strano T knob comes in Antique Brass and Brushed Satin Brass, in zinc alloy, so these are brass-coloured finishes on a zinc alloy body and not solid brass. Brass is generally two thirds copper and one third zinc, with a density of 8.4 to 8.73 g/cm3, against about 6.7 g/cm3 for the common zinc alloy. Brass is heavier than zinc alloy at the same size, and people notice the weight first. If solid brass matters to you, see solid brass cabinet handles.
Replacing handles
When you swap handles, match the fixing distance. A new D handle with the same distance drops into the old holes without drilling. Measure from the centre of one screw hole to the centre of the other. If the old holes are on another centre, you will need to fill them or drill new ones, and a filled hole shows unless the door is repainted. A T knob needs only one hole, so swapping a pull for a T knob leaves one old hole unused and the other to fill.
In a bathroom
Bathroom fittings need wiping and drying more often than those elsewhere, because steam and moisture leave marks. Bathrooms are more humid than kitchens, and solid brass, stainless steel and quality PVD are sound choices, with thin electroplated zinc alloy the one to avoid in a splash zone. A vanity door with a Strano T knob well away from the shower is a fair use, and a handle in a splash zone is the case to avoid. The cabinets these handles fit are at bathroom vanities and furniture.
Caring for plated handles
Put the cleaner on the cloth and not on the hardware, and dry the handle straight away so water marks do not form. For coated finishes, use a soft microfibre cloth with mild soap and warm water if needed, dried promptly, and keep abrasive pads, powdered cleansers, ammonia, bleach and alcohol-based disinfectants away. A coating wears first where the hand lands, so wipe the grip area more often than the rest of the handle.
Common mistakes
A few mistakes recur. Ordering by overall length when the fixing distance is what counts comes first. Buying without seeing the finish in the room's own light comes second, since colours shift on screen. Fitting undersized handles on wide drawers comes third, and choosing hardware before the cabinet finish and benchtop are settled comes last. A handle is touched every day, and these choices decide whether it stays pleasant to use.
Related pages
For the full brand, see Momo cabinet handles. For other types and materials, see cabinet handles, zinc alloy cabinet handles and cabinet knobs.

