Zanda round cavity sliding door handles buying guide
The Zanda round cavity sliding door handle kits are 65mm round plates for doors that slide into a wall cavity, made as a passage kit and a privacy kit in stainless steel, matte black, white, ember bronze and satin brass. Each kit has a flush turn design that lets the door slide fully into the cavity, an inner face that sits in a 50mm hole in the door, an included edge pull for drawing the door out, and a template and instructions for a quick, easy installation. This guide explains how a cavity handle works, what the two kits do, the sizes that decide fit, which finishes are made, and how to plan, fit and care for a kit. Searches for a round cavity slider handle lead here. The wider choice is on cavity slider hardware and sliding door privacy sets.
How a cavity slider handle works
A cavity slider runs into a pocket inside the wall, so the door disappears when it is open. A handle that stood proud of the face would stop the door entering the pocket, so cavity hardware sits within the thickness of the door. A round plate is recessed into each face, with a finger scoop to pull the door, and a small edge pull set into the leading edge lets you draw the door out of the cavity once it has slid in. Where the door needs a lock, a mechanism sits in a mortice pocket in the door edge, and a turn works it from the face.
The Zanda kit is made as a complete set, so the plates, the lock body and the edge pull suit each other and the door.
The passage and privacy kits
The passage kit has no lock. It suits a sliding door between living areas, a pantry or any door that is never locked, and it gives you the flush plates and the edge pull. The privacy kit is for sliding cavity doors that require a lock, such as a bathroom or a master bedroom. It has a flush turn design, so the lock can be operated from inside with a turn, and the door can still slide right back into the cavity. It uses a claw latch, a hook that catches the strike as the door closes.
A privacy lock is made for a room where the occupant wants privacy, not security, and it must be possible to open it from outside in an emergency. Check the release on the outside plate, test it the day the lock is fitted, keep a tool where the household can find it, and show everyone in the house how it works.
Sizes that decide fit
The face diameter is 65mm, which is the visible round plate. The inner face that sits in the door is 50mm in diameter, so the hole in the door is 50mm. A template and instructions come with each kit, so you can mark and drill the hole accurately. The kits suit doors 35 to 45mm thick, which covers the standard cavity door, and a door outside that range does not suit the set.
The three numbers to check before you order are the door thickness, the diameter of the hole and the clearance in the cavity unit. Measure the door with a tape, and check that the cavity unit leaves room on both faces for a 65mm plate and the lock body. The plates sit flush, but the lock has depth and the frame has its own clearances. A cavity unit supplier can confirm the limits for the model you have.
The edge pull
Each kit includes an edge pull, which enables a user to pull the door from a cavity with ease. When the door has slid mostly into the wall, the edge pull is the only part you can reach, so a cavity slider without one is hard to open from the open position. Fit it into a recess in the leading edge, so it sits flush and clears the jamb as the door slides in. If you replace the plates on a door that already has an edge pull, check that the old one is in good order and the finish matches.
Finishes
The kits are made in stainless steel, matte black, white, ember bronze and satin brass. Stainless steel is a plain silver that suits a modern or industrial look. Matte black is neutral and suits black frames and tapware. White suits a painted door where the handle should blend in. Ember bronze is a deep, warm brown that suits timber, and satin brass is a warm gold with a brushed look. The bodies are stainless steel with the finish applied over them. Choose the finish to match the handles on the hinged doors beside the sliding door, since the two are seen together, and keep the same finish on the plates and the edge pull. See matte black and brushed brass for the wider choice in those finishes.
Reading the product names
The names follow a pattern. In Zanda Round Cavity Sliding Privacy Door Handle Kit Matte Black, the brand is Zanda, the shape is round, the door is a cavity sliding door, the function is privacy, the product is a handle kit and the finish is matte black. A name with Passage means no lock. Each kit is one set for one door, with the plates for both faces and the edge pull.
Choosing a function
The function decides which kit you need. A passage kit suits a door that is never locked, such as a door between a hallway and a living room. A privacy kit suits a bathroom, an ensuite or a master bedroom, where the occupant wants the door locked from inside. Choose the simplest function that does the job, since a lock adds parts and fitting time. If a door is a bathroom door that may be used by children or by someone who may need help, make sure the release works and everyone knows where the tool is.
Preparing the door
The door should be prepared before the hardware arrives. Cut or confirm the 50mm hole for each plate, the mortice pocket for the lock body in the edge, and the recess for the edge pull, and check that the door is square and the right thickness. Give the door maker the template and the specification before the leaf is made, and ask for the preparation to be done in the workshop, where it is easier to get right. If you are retrofitting hardware to an existing door, check the existing holes against the new plate before you buy.
Fitting a kit
Use the template to mark the position of the plate on each face at the same height, usually around hip height, and check that the two plates line up so the door looks the same from both sides. Drill the 50mm hole with a hole saw from one face and finish from the other to avoid splintering. Cut the mortice pocket in the door edge for the lock body, fit the lock, and check that the latch works freely before you fit the plates. Fit the plates, tighten the fixings evenly, and fit the edge pull into the leading edge. A hollow core door needs a solid block behind the plate to carry the fixing, so check the construction of the door before you cut.
Setting the height and position
The plate should sit at a height where a hand falls naturally on it, usually around hip height, the same as the handles on the hinged doors in the house. On a cavity slider the position along the door matters as well. The plate sits near the leading edge, close enough that you can reach it when the door is nearly closed, but far enough from the edge that the hole does not weaken the stile. Mark both faces at the same height with a level so the plates line up through the door.
Cavity unit questions
The cavity unit sets the limits for the door and the hardware, so ask the supplier three questions before you order a kit. What door thickness does the unit take, and what is the clearance on each face? What is the position and depth of the pocket for a lock body? Does the unit allow an edge pull, and how much clearance is there at the jamb? The answers tell you whether the kit will fit, and they save a return. If the unit is not yet ordered, choose it with the hardware in mind.
Sound, light and privacy gaps
A sliding door has a small gap at the jamb, so it is less sound proof and less light proof than a hinged door with seals. A privacy lock gives visual privacy and keeps the door closed, but it does not change the gap. Think about the room before you choose a sliding door for a place where sound privacy matters, such as a bedroom beside a living area. A lock does the job it is made for, and the construction of the door and the jamb decides the rest.
Care
Wipe the plates with a soft damp cloth and dry them. Keep abrasive pads, polishes and acidic or bleach-based cleaners away from the finish. If the door sticks, check the track and the guide before you blame the hardware. Tighten the fixings once a year, and keep the recess free of dust so the plate sits cleanly. Matte black and white finishes need a gentle wipe to keep the coating even.
Questions people ask
Do I need one plate or two? Two plates, one on each face, plus an edge pull for a cavity door. Each kit includes the plates and the edge pull.
Can a privacy kit be opened from outside? It must have a release on the outside, so check it when the lock is fitted.
What size hole do I drill? A 50mm hole for the inner face, and the template in the box shows the position.
