Thermogroup Econoboard Uncoated Thermal Insulation Boards 6mm - 20 pack (14.4sqm)
0 In Stock
Free Toilet Brush
Spend over $400 and receive a FREE silicone toilet brush set, valued at $48
Free gift with purchase
Spend $1,000+ for a free luxury towel set ($169 value) or $5,000+ for a free floor-length mirror ($799 value)
Free Thermogroup Timer
Buy 3+ Thermogroup single bar heated rails, get a FREE touchscreen 7-day timer
SKU 6012
Bathroom Heating & Ventilation by Thermogroup
- Improve the efficiency of your Underfloor Heating by up to 50% through preventing downward heat loss and reducing your heat up times.
- R Value (m²k/w) 0.18
- 100% moisture resistance and rot proof.
- Ensures minimal heat loss into the substrate.
- Easy to install - cut with regular hand tools.
- Coated Boards can be glued to a concrete substrate using flexible tile glue.
- Allow enough insulation board to cover your entire floor area.
- Uncoated Econoboard is not recommended for use where a waterproofing layer will be applied directly over the insulation. In this application please use the Coated Econoboard.
- Econoboard is warranted against material defect for the lifetime warranty of the original floor covering under which it is installed.
Description
Heat travels equally in all directions until it reaches a layer of thermal resistance. A layer of Econoboard Insulation Boards beneath the Underfloor Heating to act as a thermal resistance layer and stops the downward heat loss. Like all insulation, it is optional, however, it will pay itself off in the long term by reducing the ongoing running costs of the Underfloor Heating.
Technical Data
- Board Size 1.2 x 0.6
- Board Area 0.72m2
- Pack Area 14.4m²
- R Value (m²k/w) 0.18
- Thermal Conductivity 0.033W/MK
- Compressive Strength 300 kpa
- Water Absorption 0.6% by vol
- Temperature Range -50°C to +75°
What's In The Box
- 20 x 6mm boards 1.2m x 0.6m
