Thermogroup Thermorad Heated In-Wall Panel Towel Dryer
SKU: TR5585
Bathroom Heating & Ventilation by Thermogroup
Thermorad provides a revolutionary new way to dry your towels. The Thermorad panel provides an opportunity to make any towel rail a towel dryer without compromising on your design or style. If you can't find a Heated Towel Rail to match your tapware colour or style then Thermorad is the answer.
- No one enjoys the experience of using a damp towel however it is a common reality for those who shower morning and evening or in areas of high humidity. The Thermorad sits invisibly behind the wall and dries a damp towel in around 4-6 hours
- The panel is designed to be concealed within the wall whilst radiating heat directly behind a towel, reducing the drying time by up to 70% as opposed to a non-heated towel rail
- Can be used with any rail, robe hook or ladder without compromising on the design aesthetics of your room. Install the hook or rail above the unit so that your towels hang in front of the heated area. For towel ladders you must ensure that all fixings are clear of the in-wall panel, a minimum of 50mm clearance is required.
- Low energy usage using only 160 watts per hour. This means that if it was running for 6 hours per day it would cost around 25 cents a day to run.
- Heated area 500mm wide by 680mm high
- Backed by a 10 year warranty
- Australian made
- We recommend also purchasing a programmable timer to allow you to set up your preferred drying schedule and to avoid wasting energy. Alternatively, the panel can be wired to a switch for manual on/off operation.
Specifications
| Width | 555mm |
| Height | 850mm |
| Depth | 25mm |
| Cord length | 2m |
| Wiring position | Centre at top of unit |
| Input voltage | 240V |
| Total wattage | 160W |
| Max. temperature | 50°C |
| Rating | N/A |
What's In The Box
- Thermogroup Thermorad Heated Wall Panel
- Installation instructions




