32mm basin wastes guide
A 32mm basin waste is a plug and waste made for a basin with a 32mm outlet, and it is the size most vanity basins in Australia take. This page holds pop up and pop down wastes in that size, with and without an overflow, in brass, ceramic cap and concrete cap versions. The decision comes down to four checks. Confirm the outlet size and thread, whether the basin has an overflow, how the plug works, and what the cap is made of. The sections below take each in turn. For every basin waste size, start at basin wastes.
What 32mm refers to
On a basin waste, 32mm names the outlet size, the opening and thread that the waste screws into at the bottom of the basin. The thread backs that up. The Fienza flat ceramic cap wastes, the Eight Quarters concrete wastes and the Eight Quarters ceramic wastes have a G1 1/4 inch thread, which is the thread for a 32mm outlet. The 40mm sizes on the sibling page have G1 1/2. So the thread is a second check on the size, next to the number in the title.
A common search question asks whether 32mm is the internal diameter of the waste pipe. What matters in practice is that the basin outlet and the waste thread match, and the old waste is the best evidence of that.
32mm or 40mm
Both sizes are common. Basins are usually 32mm and baths 40mm, vanity basins usually take 32mm, and larger fixtures take 40mm. Most Australian basins take 32 or 40mm, measured at the part inside the basin, and a 32mm waste can connect to 40mm pipe with an adapter. In practice the basin sets the size, the pipe comes second, and an adapter covers a mismatch between them.
The basin is the fixed part, so measure it first. For a 40mm outlet, the sibling page basin wastes 40mm outlet size holds the matching range. A tape across the hole in the bowl gives the size. Measure the hole itself, since the cap sits above it and reads larger. When the old waste is still in place, loosen it and measure the threaded part, which is the more reliable number.
Overflow or no overflow
The overflow is the small slot or hole near the top of some basins that lets water escape before the bowl spills. It decides which waste fits. A waste for a basin with an overflow has slots so that water from the overflow can pass through the waste body. A waste for a basin without an overflow has no slots, so it suits only a bowl with no overflow hole.
Each product here is clear about the overflow. The Fienza flat ceramic cap wastes come in two versions, one with built-in overflow and one without. The Eight Quarters wastes in this range have no overflow, and the concrete versions are designed for basins without an overflow. The Meir universal waste includes an overflow. The Fienza universal pull-out waste is convertible: the overflow is adjusted by a centre screw, so one product works for a basin with or without an overflow. The ART Australia Pop Down 32mm waste suits basins with a 32mm outlet with or without overflow.
Pop up and pop down
The Blue Space uses the two terms for a specific difference. A pop up waste has a cap that sits proud of the basin surface when it is open, usually a dome. A pop down waste sits flush with the surface when open. Both close with a press, so neither needs a chain or a separate plug.
The ART Australia Pop Down 32mm is the flush type. It is a quick close waste that sits flush in the most commonly used open position, with a quick remove cartridge for cleaning and drain access. The Fienza flat ceramic cap wastes have a pop-up/pop-down mechanism and a flat cap. The Fienza universal waste has a brass dome cap, so it is a pop up in the TBS sense. For each design on its own, see pop up basin wastes and pop down basin wastes.
Flat ceramic cap wastes
The Fienza flat ceramic cap wastes suit a basin with a 32mm outlet. The cap is vitreous china in gloss white or matte white, so it reads as part of a white basin. The surface diameter is 66mm, the overall height is 70mm and the thread is G1 1/4 inch. The non-overflow version suits a basin without an overflow, and the overflow version has the overflow built in. Because the cap is flat, it leaves a slimmer profile in the bowl than a dome.
Eight Quarters ceramic and concrete wastes
Eight Quarters is a family-run Australian business that makes countertop basins, and its wastes are made to sit with them. The ceramic pop up wastes come in gloss white, matte white and matte black. They have a ceramic top with brass and chrome construction, no overflow, a 32mm waste outlet with a 40mm adaptor included, and dimensions of 68 x 68 x 120mm. A gloss marble version, white with grey and gold marbling, suits the Regency basins and carries the same 32mm outlet and adaptor and no overflow.
The concrete wastes come in blush, oat and white in this collection, and grey and charcoal are also available colours. They have a concrete top with brass and chrome construction, suit a 32mm waste outlet, are designed for basins without an overflow, and are standards and Watermark approved. One set has a top diameter of 68mm, an overall height of 105mm and a G1 1/4 inch thread. Another set measures 64 x 64 x 120mm, with a height of 78mm and a surface diameter of 64mm, and the same thread. Check the dimensions for the colour you choose, since they differ between the two sets.
Fienza universal pull-out wastes
The Fienza universal pop-up and pull-out basin waste is the flexible option. The entire top section pulls out for cleaning and draining, the cap is a brass dome, and the waste converts for use with or without an overflow by adjusting a centre screw. It suits a 32mm or 40mm outlet, with an adaptor included for the 40mm. The surface diameter is 63mm and the thread is G1 1/2 inch.
That thread looks odd next to the 32mm size, and it is worth reading carefully. The waste suits a 32mm or 40mm outlet, and the 40mm needs the included adaptor. Check the box contents and the specification before ordering.
Finishes are chrome, matte black, brushed nickel, gun metal, brushed copper and urban brass. A concrete-cap range adds warm grey, sage, warm white, terrazzo and Tuscan. The concrete caps carry a food-grade nano sealant and are designed for use with basins only.
ART Australia pop down 32mm
The ART Australia Basin Pop Down plug and waste in 32mm is the pop down option here. It suits basins with a 32mm outlet with or without overflow, and it has a quick close mechanism that sits flush in the open position, runs smoothly and has a quick remove cartridge. The standard finish is chrome, and the polished brass version has a raw brass finish that is not coated and patinas over time. The brand was previously known as Bounty Brassware, and the full brand range is on Bounty Brassware.
Modern National 32mm
The Modern National 32mm pop up waste is a brass product in a wide finish range: antique brass, matte black, gun metal, brushed chrome, chrome, brushed nickel, brushed bronze, polished brass, champagne and dusk. It has DZR brass construction. DZR stands for dezincification resistant, an alloy used where water would otherwise leach zinc out of ordinary brass. The choice that matters most on the with-overflow version is overflow or non-overflow, and it carries Watermark certification.
Choosing the right waste
Start with the basin. If it has an overflow, choose a waste that includes one, or a convertible waste such as the Fienza universal. If it has no overflow, choose a non-overflow waste, which includes the Eight Quarters ceramic and concrete range and the Fienza flat cap non-overflow version. If you are matching a bowl made of ceramic or concrete, a cap in the same material gives the most consistent look. If you want a waste that sits flush, the ART Australia Pop Down is the choice. If you want the widest range of colours, the Modern National range has ten.
Five steps for choosing
The choice reduces to five steps, and they work well for this size. First, measure the outlet. Second, choose a slotted waste if the basin has an overflow, or a non-slotted one if it does not. Third, decide between a pop up style and a standard plug. Fourth, match the finish to the tapware. Fifth, check for the WaterMark logo. The common materials are PVC, chrome, stainless steel and brass, and adaptors such as 32mm to 40mm bridge a size mismatch.
Thick tops and extended wastes
Extended wastes are made for thick vanity tops. A countertop basin sits on a slab, and the waste has to reach through the basin and the slab to meet the trap below. The overall heights in this collection include 70mm on the Fienza flat cap wastes and 105mm on one set of Eight Quarters concrete wastes. The ceramic Eight Quarters wastes are 120mm. Compare that height with the thickness of the basin base and any slab before ordering, since a short waste will not reach through a thick top.
Care and cleaning
A pop up or pop down waste is easy to look after. Lift out the cap or the cartridge where the design allows it, rinse off hair and soap, and wipe the seat. On the Fienza universal waste, the entire top section pulls out for cleaning and draining. On the ART Australia Pop Down, the quick remove cartridge is the part to lift out.
Related pages
The wider guide to sizes, overflow and pop up v pop down is basin wastes. Bath outlets are usually the larger size, so bath wastes covers the bath range. Wall hung basins often need a visible trap below the waste, and bottle traps holds those. The full range of traps and wastes starts at wastes, traps and grates.


