Skip to content

Castella Century Cabinet Handles

0 Items

Whoops, there are none available in your area

View all products

Castella Century cabinet handles buying guide


The Century is a zinc alloy range from Castella: a curved bar handle with subtle ridges at each end, in three sizes, with matching round and oval knobs. The handle suits traditional and modern interiors. The sections below explain what the pieces measure and how the size names relate to the figures. They then cover what zinc alloy and each finish are, how to choose a size, how to fit and replace a handle, and how to look after it. The page also answers the question behind the searches for a Century knob and a Century brass handle. For the whole brand, start at Castella cabinet handles, and for handles of every maker and material, cabinet handles.

What the Century range is

The Century handle is a curved, minimalist bar with subtle ridges at each end that add detail without disrupting the clean look, inspired by classic craftsmanship. The round knob has sleek curves and a subtle ridged detail around its circumference. The idea of the range is a plain curved shape with a small ridged detail, repeated on the handle and the knobs, which is why the pieces read as a set.

The Century is zinc alloy, and the finishes are a mix of plated and aged looks: Chrome Plated, Satin Nickel, Pewter, Matt Brushed Brass, Antique Black, Old America and Antique Brass. Which finish is on which piece varies, so check the product page for the piece you want.

The pieces, measured

The fixing distance is the gap between the two screw holes, overall length is the full length of the handle, and projection is how far it stands off the door.

  • The Castella Century Handle is zinc alloy and comes in three sizes: 109mm, 140mm and 174mm long, on fixing distances of 96mm, 128mm and 160mm. It is 12mm, 14mm or 16mm thick and projects 24mm, 27mm or 27mm. It comes with two 22mm screws in a double screw fixing.
  • The Castella Century 30mm Round Knob is zinc alloy, 30mm across and 30mm wide, projecting 23mm. It comes with one 22mm screw.

The size names are the centres, not the length

The handle is sold by its fixing distance. A 96mm handle is 109mm long, a 128mm handle is 140mm long and a 160mm handle is 174mm long, which is 13mm, 12mm and 14mm more than the centres. The gap between the centre-to-centre measurement and the overall length varies with the design, from a few millimetres on a tight D handle to much more on a long tapered bar. When you order a replacement, measure the holes in your door and not the length of the old handle.

The handle and bar pulls generally

A bar pull is a straight or slightly curved rail that you can grip from several angles. It works on doors and on drawers and comes in many lengths. Some bar styles may catch loose clothing, and bar pulls read as clean and modern. The Century handle is a slightly curved bar, so it falls into that family. See cabinet pull handles for more.

The three sizes cover the common jobs. The one-third rule says a pull is about one third the width of the drawer front, so a drawer about 600mm wide takes a pull of about 200mm. The 174mm Century is the closest of the three to that figure, the 140mm suits a drawer of about 450mm, and the 109mm suits a narrow vanity drawer or a small door.

The knobs

Knobs are gripped with the fingers and take a single screw, and they suit small to medium doors and drawers, light use, and traditional, vintage or rustic interiors. Most cabinet knobs run roughly 25mm to 38mm across. The Century 30mm round knob sits in the middle of that range and is the right size for a standard door or drawer.

Zinc alloy: what it means in a handle

Zamac, the zinc-based alloy used for handles, is a family of alloys of zinc, aluminium, magnesium and copper, with excellent castability and long-term dimensional stability. It is a lighter alternative to brass that is durable, corrosion-resistant and able to keep a consistent finish. Its density is 6.7 g/cm3 for the common grade, so the Century feels solid in the hand.

The finish does the protecting. Die-cast zinc handles must have a corrosion-proof finish, either plated or powder coated, because uncoated zinc handles show white rust and corrosion pits. A Century handle is therefore as good as its coating. See zinc alloy cabinet handles for the material in detail.

The finishes

  • Chrome Plated is a thin layer of chromium electroplated onto the base, usually over a layer of bright nickel plating. Decorative layers are typically 0.13 to 0.25 micrometres thick. It is shiny and cool, and it shows fingerprints and water spots more readily than brushed nickel. See chrome cabinet handles.
  • Satin Nickel is a soft, even, low-sheen silver. Brushed and satin nickel are used interchangeably, brushed referring to the fine surface texture and satin to a smooth muted sheen, and satin nickel is nickel plating on brass dulled and lacquer coated. See brushed nickel cabinet handles.
  • Pewter is a darker, cooler grey. Cool brushed nickel is a silvery grey with blue or pewter undertones that suits contemporary or minimalist rooms. The Century Pewter has a brushed nickel finish line, so expect a grey metal.
  • Matt Brushed Brass is a soft, muted gold. See brushed brass cabinet handles.
  • Antique Black is a dark, aged black. Its finish line reads Aged, Black. See black cabinet handles.
  • Old America is the name of a finish that has a bronze finish line. See bronze cabinet handles.
  • Antique Brass is a darker, aged brass. It is softer and more muted than polished or brushed brass, with a lived-in, vintage look, and it is for interior use only, because outdoor exposure may cause tarnishing. See antique style cabinet handles.

Knobs with handles

When you mix types, give each handle style a function, such as knobs on swing doors and pulls on drawers, with one finish throughout. Plan the holes before drilling, since finishes are easy to change and holes are not. That suits the Century well: the handle goes on the drawers in the size that matches the drawer width, the 30mm knob goes on the doors, and one finish runs through both. The set then reads as a decision.

How the finishes age

Antique brass is a darker, aged finish, so keep it indoors. Solid brass and bronze develop an uneven patina, lighter at the points that are touched most and darker in recessed areas. The Century is zinc alloy with a coating, so treat the aged finishes as an applied look, and expect the coating and not the metal to show the wear at the grip.

For the plated finishes, thin chrome plating on a zinc alloy handle can show wear within 12 to 18 months in a busy kitchen, dulling first at the grip point. That is why a handle used many times a day shows its age first on the side the fingers touch. A rinse and dry after cleaning slows that, and the gentle cloth-and-mild-soap routine in the care section below suits every finish.

Choosing by room

Bathroom vanities suit the 109mm and 140mm handles and the 30mm knob, with the finish chosen to match the tapware. Wipe and dry bathroom fittings more often than those in other rooms, because steam and moisture leave marks. See bathroom vanities and furniture for the cabinets they fit. Kitchens suit the 174mm handle on wide drawers and the knobs on doors, and wardrobes and laundries suit the same pieces.

Choosing a size

A widely used rule: a pull is about one third the width of the drawer front. For fronts between roughly 450mm and 700mm wide, 128mm, 160mm or 224mm centres suit, and beyond that, 256mm or 320mm centres, or two pulls, suit better. The Century centres of 96mm, 128mm and 160mm cover the small and middle of that range, and the longest Century handle is 174mm overall on 160mm centres. A wider drawer needs a longer pull from another range.

The placement rule is simple. A pull or knob sits 40mm to 60mm from the edge that opens, near the bottom corner of upper doors and the top corner of lower doors. Pulls sit horizontally on drawers and vertically on doors. A projection of 23mm to 27mm leaves room for the hand, but check clearance wherever two doors open close together.

Replacing handles, and fitting

If you are replacing existing handles, match the fixing distance. The Century distances are 96mm, 128mm and 160mm, and a new handle with the same distance goes into the old holes without drilling. Measure from the centre of one screw hole to the centre of the other, not from the edge of the handle.

Check the screws too. The Century handle comes with two 22mm screws and the round knob with one. Screw length follows panel thickness: a 22mm screw for panels 16mm to 18mm thick, and a 38mm screw for panels 32mm to 34mm thick. A door of 16mm to 18mm takes the supplied screw, and a thicker drawer front needs a longer one. A screw needs to bite into the handle and stop short of the door face.

Caring for plated and aged handles

Care protects the coating. For a zinc alloy handle, wipe with a soft, dry cloth, and avoid abrasive cleaners or harsh chemicals. Put the cleaner on the cloth and not on the hardware, and dry the handle immediately to prevent water marks. For lacquered finishes, use a soft microfibre cloth with mild soap and warm water if needed, dried promptly, and keep abrasive pads, powdered cleansers, ammonia, bleach and alcohol-based disinfectants away.

Related pages

For the full brand, see Castella cabinet handles. For other types and finishes, see cabinet handles, cabinet pull handles, cabinet knobs and zinc alloy cabinet handles.

Frequently Asked Questions

What types of cabinet handles are available for bathroom vanities?

Bathroom vanity cabinet handles come in bar pulls, knob handles, T-bar pulls, cup pulls, and edge pulls (for handleless drawer looks). Bar pulls in lengths of 96mm, 160mm, and 256mm are among the most popular in Australian bathrooms for their clean, contemporary appearance. Knobs are a classic choice for traditional or Hamptons-style bathrooms. The Blue Space stocks handles from brands including Momo Handles and Zanda in finishes to suit every style.

What size cabinet handle do I need?

Australian handles are generally measured by "hole centres", the distance between the two screw holes, measured centre to centre. Common sizes include 96mm and 128mm for kitchens, and 160mm becoming increasingly popular in modern builds. As a general guide, the 1/3 rule works well: your handle length should be roughly one-third the width of the door or drawer. So a 600mm-wide drawer suits a handle around 160–200mm, while smaller drawers under 300mm work best with a shorter 70–100mm pull or a knob.

Should I choose cabinet handles or knobs?

Both have their place, and many homes use a mix of the two. Handles offer a larger, more comfortable grip, making them ideal for drawers and heavier daily use. Knobs are simple to install, easy to clean, and suit cabinet doors or lower-traffic areas where a subtler look is preferred. A common approach is to use handles on drawers and knobs on doors, giving your kitchen, bathroom or laundry a considered, tailored finish.

Can I use the same cabinet handles in my kitchen, bathroom and laundry?

Yes, and many homeowners do this to create a seamless, considered flow throughout the house. That said, it's important to factor in environment: bathrooms and laundries are exposed to higher humidity and moisture, so finishes like solid brass with a PVD coating, stainless steel, or quality powder-coated options will hold up better than raw or untreated materials over time.

How do I replace cabinet handles without drilling new holes?

Measure your existing hole centres by checking the distance between the centre of each screw hole, then choose a new handle with matching hole centres. If you'd like to switch to a different style or size, options like backplates, edge pulls, or handles designed to cover old holes make it possible to update your look without redrilling your cabinetry.

How do I match cabinet handle finishes with my tapware and appliances?

For a cohesive, well-designed home, cabinet handles are best chosen to complement your tapware, sink and appliance finishes. Matte black handles pair beautifully with matte black tapware for a contemporary look, while brushed nickel or brushed brass options suit warmer, Hamptons-style spaces. If your appliances are stainless steel, brushed nickel or stainless handles will tie the room together. It's worth considering your whole space, kitchen, bathroom and laundry, for a consistent finish throughout the home.