Castella Grove Cabinet Handles Buying Guide
The Grove is a solid brass range from Castella with a diamond-knurled surface. It has a pull handle in three sizes, a 35mm knob, a 50mm T-knob and a 450mm appliance pull, in four finishes: Satin Brass, Dull Brushed Nickel, Bronze and Matt Black. The page covers what knurling is and why it matters in the hand, what each Grove piece measures, and how solid brass behaves and wears. The finishes follow, with advice on how to size, fit and clean the handles. For the whole brand, start at Castella cabinet handles. A sibling brass range with a similar texture is on the Ridge brass page.
What the Grove range is
The Grove is a brass collection with knurling for a more textured touch. The pull is cut from solid brass and carries diamond knurled detailing for grip, slim enough for kitchens and bathroom vanities. The range has a matching cabinet knob, T knob and appliance pull. One texture therefore runs through four shapes, and a kitchen can use the pull on drawers, the knob on doors and the appliance pull on the fridge, all in one finish.
The pieces, measured
The sizes below are the known figures for these pieces, and any figure that is not known is left out. The centre, or hole centre, is the gap between the two screw holes. Overall length is the whole handle, and projection is how far it stands off the door.
- The Castella Grove Pull Handle comes on centres of 128mm, 192mm and 256mm, with overall lengths of 168mm, 252mm and 336mm. It is 12mm wide, projects 33mm and comes with two 25mm screws in a double screw fixing.
- The Castella Grove Appliance Pull is 450mm long on a 352mm hole centre, 18mm wide and 48mm deep. It weighs 1.125kg and comes with two 25mm M6 screws.
- The Castella Grove Knob is 35mm with one 25mm screw, and the Castella Grove T-Knob is 50mm, also with one 25mm screw. The pages read state no width or projection for either.
The pull is sold by its centres. A 128mm handle is 168mm long, 40mm longer than its fixing distance, so measure the holes in the door when you replace a handle and ignore the length of the old one.
Solid brass in a handle
Brass is heavier than zinc alloy or aluminium at the same size, and people notice the weight first. The numbers show why. Brass is generally two thirds copper and one third zinc, with a density of 8.4 to 8.73 g/cm3, against about 6.7 g/cm3 for the common zinc alloy and 2.70 g/cm3 for aluminium. The 1.125kg appliance pull is a good illustration of that mass.
Brass also changes colour. Copper reacts with sulfur to form a brown layer, and slightly acidic water can turn it into a green-blue patina. A finish slows the change: an unlacquered finish is living and develops a patina, and a clear lacquer holds the colour as made. Brushed brass is solid brass under clear lacquer, so a scratch shows more of the same brass. Antique brass, gunmetal and brushed nickel are electroplated over brass and show yellow brass in a deep scratch. Treat the Grove finishes as coated.
One caution applies near the sea. Brass is not suitable for marine use unless tin is added, because zinc reacts with salt water. Brass indoors in a coastal house is a normal choice, while in a splash zone or outdoors 316 stainless steel is safer. See solid brass cabinet handles and stainless steel cabinet handles.
The four finishes
Finishes sort by mood: warm metals such as brushed brass for traditional and transitional rooms, black for bold and modern ones, nickel for cool and neutral ones.
- Satin Brass is a soft, even gold, and it sits well against white, cream and navy. See brushed brass cabinet handles.
- Bronze is darker and browner, and it suits warm timber and traditional rooms. See bronze cabinet handles.
- Dull Brushed Nickel is a soft, cool grey: a metallic silver with a slight warm grey undertone and a low satin sheen that disguises fingerprints. See brushed nickel cabinet handles.
- Matt Black is the boldest of the four. See black cabinet handles.
The pull handle and the knobs
A common rule says a pull should be about a third as long as the drawer front is wide, which gives about 200mm for a drawer 600mm across. The 252mm pull on 192mm centres is the nearest of the three Grove sizes. The 168mm pull on 128mm centres suits a narrower drawer or a vanity, and the 336mm pull on 256mm centres suits a wide drawer or a tall door. See cabinet pull handles.
Knobs take the fingers and a single screw and suit small doors and drawers, while pulls take the whole hand. Most cabinet knobs run roughly 25mm to 38mm across, so the 35mm knob is a standard size for a door. The 50mm T-knob is a longer grip for a small door or a narrow drawer. See cabinet knobs.
The appliance pull
Appliance pulls differ from cabinet pulls in strength. An appliance pull is usually larger and sturdier because it deals with frequent use, the weight of the door and the suction on built-in fridges and freezers. Standard cabinet pulls are the wrong choice for appliances, since they tend to lack the strength and thickness, and a longer pull gives better leverage on a tightly sealed door.
The Grove appliance pull is solid brass, 450mm long, with a 48mm projection and M6 screws, which are larger than the screws on the pull and knobs. It suits refrigerators, freezers, dishwashers and ovens. Its 352mm centre means the appliance front must be wide enough to take it. See appliance pull handles.
An appliance does not always need a pull. Fisher and Paykel makes an assisted opening accessory that opens integrated doors without a handle, and Miele makes a dishwasher that opens when you tap twice on the front.
Choosing by room
Bathroom vanities suit the 168mm and 252mm pulls and the knob. Wipe and dry bathroom fittings more often than those elsewhere, because steam and moisture leave marks. The cabinets they fit are at bathroom vanities and furniture. Kitchens suit the 252mm and 336mm pulls on drawers, the knob on doors and the appliance pull on the fridge or dishwasher. These are matches and not rules, and a sample held against the door settles any doubt.
Choosing a size
As a guide, 128mm, 160mm or 224mm centres suit fronts roughly 450mm to 700mm wide, and 256mm or 320mm centres, or two pulls, beyond that. Pieces that are too small look disconnected, and pieces so large they take over. A pull or knob sits 40mm to 60mm in from the edge that opens, near the bottom corner of an upper door and the top corner of a lower door. Pulls run horizontally on drawers and vertically on doors. Tall pantry doors suit long vertical pulls, which improve grip and weight balance.
Replacing handles, and fitting
When you swap handles, match the fixing distance. A new pull with the same distance drops into the old holes without drilling. Measure from the centre of one screw hole to the centre of the other. A 128mm handle will not fit 160mm holes without new holes.
Check the screws. The pull comes with two 25mm screws, the knobs with one, and the appliance pull with two 25mm M6 screws. Screw length depends on the panel: 22mm for panels 16mm to 18mm thick, 38mm for panels 32mm to 34mm thick. The screw must bite into the handle and stop short of the door face. Tape a paper template to the door and mark the holes before you drill, and fit one handle before you do a whole kitchen, so you can see the finish in the room's own light.
Caring for brass handles
An unlacquered finish can be polished, but a lacquered one should not be, because brass polish strips the clear coat and leaves patches. Treat every Grove finish as coated and avoid brass polish. Use a soft cloth with mild soapy water, wiped dry. Put the cleaner on the cloth and not on the hardware, and dry the handle straight away so water marks do not form. For lacquered finishes, use a soft microfibre cloth with mild soap and warm water if needed, dried promptly, and keep abrasive pads, powdered cleansers, ammonia, bleach and alcohol-based disinfectants away. A coating wears first where the hand lands, so wipe the grip area more often than the rest.
What to look at before you order
A short list of mistakes recurs. The first is ordering by overall length when the fixing distance is what counts, which is why the Grove pull is sold by its 128mm, 192mm and 256mm centres. The second is buying without seeing the finish in the room's own light, since colours shift on screen. The third is fitting undersized handles on wide drawers and appliance doors, and the last is choosing hardware before the cabinet finish and benchtop are settled. A knurled brass handle is touched every day, and these choices decide whether it stays pleasant to use.
Reading the Grove details
Read the product page and the figures together. Check the centre, because the pull is sold by its fixing distance. Check the screw line: the pull comes with two 25mm screws, the knobs with one, and the appliance pull with two 25mm M6 screws. Check the finish name too, since the range uses Satin Brass, Dull Brushed Nickel, Bronze and Matt Black. If a figure is missing, such as the width of the knob, ask before you order and do not assume it. This page states only confirmed figures.
Related pages
For the full brand, see Castella cabinet handles. For other types and materials, see cabinet handles, solid brass cabinet handles, appliance pull handles and cabinet knobs.