Clark toilet roll holders buying guide
Clark makes toilet roll holders in a round and a square style, in a metal body, and each style has a version with an integrated shelf. This page holds five holders: the Round in matte black, chrome and brushed nickel, the Round with shelf in matte black, and the Square with shelf in matte black. All come with a fixing kit. The choice is the style, a shelf or no shelf, and the finish that matches your Clark tapware.
The Clark holders side by side
| Holder | Finishes | Size | Shelf |
|---|---|---|---|
| Round | Matte black, chrome, brushed nickel | 50mm out, 150mm wide, 85mm high | No |
| Round with shelf | Matte black | Not stated | Integrated |
| Square with shelf | Matte black | Not stated | Integrated |
Round
The Round is the standard Clark holder and the only one in three finishes. It stands 50mm from the wall, is 150mm wide and 85mm high, and has a metal body made for durability. In brushed nickel it is electroplated and held on a dual fixed concealed bracket, so no screws show on the front. The box holds a fixing kit.
Round with shelf
The Round with shelf keeps the round shape and adds an integrated shelf above the roll. It is a metal holder in matte black, with a fixing kit in the box. The shelf gives a phone a place to sit that is not the floor or the cistern.
Square with shelf
The Square with shelf is the squared version of the same idea: a metal holder in matte black with an integrated shelf and a fixing kit. Choose it when the rest of your Clark fittings are square, and the Round with shelf when they are round.
Where to fix a Clark holder
Mark the centre of the roll between 660mm and 760mm above the finished floor and about 200mm to 300mm forward of the front edge of the pan. Those figures are a first mark. Tape a spare roll to the wall and sit down to check your reach before you drill. Check the door swing, the shower screen and any vanity beside the pan. For the shelf versions, add clear wall around the holder, since the shelf takes space above the roll.
Matte black
Matte black is on all three designs: the Round, the Round with shelf and the Square with shelf. It is a flat finish with no sheen, and it is the only finish for the shelf versions. If you want a shelf in chrome or brushed nickel, the shelf choice is on toilet roll holders with shelf. For matte black holders from other brands, see black toilet roll holders.
Chrome
Chrome is on the Round only. It is the plain match for most mixers and towel rails, and the Round in chrome has the same 50mm projection and 150mm width as the other two finishes. See chrome toilet roll holders for chrome from other brands.
Brushed nickel
Brushed nickel is on the Round only, and it is the version with the most stated detail: an electroplated finish, a dual fixed concealed bracket, 50mm out, 150mm long and 85mm high. For other brushed nickel holders, see brushed nickel toilet roll holders.
Choosing a projection
| Group | Projection | Holders |
|---|---|---|
| Medium | 50mm | Round in matte black, chrome and brushed nickel |
| Not stated | Check the product | Round with shelf and Square with shelf |
The Round sits 50mm from the wall, which keeps a roll neat beside the pan. The shelf versions have no projection figure, so confirm the depth on the product page before you plan the wall around a shelf.
Why a shelf holder
A shelf holder keeps a phone off the floor and off the cistern, which is where it is easiest to drop. It also gives a small item a place to sit. A shelf holder does need more clear wall than a plain one, so measure the space beside the pan before you choose it, and check that the shelf will not catch a door or a screen.
The body behind the finish
Every Clark holder has a metal body made for durability. The brushed nickel Round has an electroplated finish, and the other finishes are matte black and chrome.
How the Clark holders are fixed
The brushed nickel Round is held on a dual fixed concealed bracket, and every Clark holder comes with a fixing kit. Additional fixing points share the pull of tearing off a sheet, though each one still needs a solid hold behind the tile or plasterboard. Find a stud or add a backing plate before drilling, and check for pipes and cables behind the wall.
What comes in the box
Every holder here comes with a fixing kit. The shelf versions and the Round come as the holder itself, with the fixings in the kit.
When the toilet is not in a corner
A holder needs a wall, so where the toilet stands in the open the holder can go on the side of a vanity, on the back wall or on a partition or screen. Keep the same height, between 660mm and 760mm to the centre of the roll, and the same distance forward of the pan. The Round suits any of those surfaces, and a shelf version needs more clear space around it than the plain Round does.
One roll, two rolls or a spare
The Clark holders here are single-roll holders. For two rolls in one spot, or a spare near the pan, see double toilet roll holders and spare toilet roll holders for the choices from other brands.
Accessible bathrooms
A residential bathroom has no mandatory holder height, but an accessible bathroom is set out under AS 1428.1 and the project documents. If the holder is part of an accessible brief, confirm the height and the distance from the pan against those documents before you fix anything.
Fixing to tile, plasterboard or a framed wall
The wall behind the holder decides how you fix it. On tile, use the right masonry bit and drill slowly so the tile does not crack. On plasterboard, fix into a stud or use an anchor made for the load. In a framed wall that is still open, ask for blocking at the right height, so the screws meet solid timber. Check for pipes and cables before you drill in any case.
Replacing an old holder
Three of these holders belong to Clark's easy replacement group, which makes them a sensible swap for a holder that has failed or lost its finish. Measure the old one first. The Round is 150mm wide and 85mm high, so a holder of a different size can leave the old screw holes showing. Choose the wider holder to cover them, or fill and repaint the holes when you choose a narrower one.
A Clark set in one finish
Clark makes the Round robe hook in matte black, chrome and brushed nickel, the same three finishes as the Round holder, so a hook and a holder can match across the bathroom. The Round robe hook stands 40mm out and 45mm high, and the Round holder 50mm out and 85mm high. See Clark robe hooks for the hooks and the matte white wall hook.
The Basics group
Four of these holders sit in Clark's Basics group: the three Round holders and the Round with shelf. The Square with shelf is the one holder outside it. That makes the Round and the Round with shelf the natural pair for a bathroom built around Clark Basics fittings.
Choosing between the three finishes
Match the finish to the tap and the towel rail first. Chrome is the traditional choice and the plain one, matte black is the flat dark finish, and brushed nickel is the contemporary, softer one. If the bathroom already has a mix, choose the finish that appears most often on the wall beside the pan, because the holder sits where the eye lands when you walk in. Only the Round comes in all three, so a bathroom in chrome or brushed nickel has no shelf option from Clark.
Which Clark holder for which bathroom
| Situation | Holder |
|---|---|
| A plain holder in chrome or nickel | Round |
| A plain holder in black | Round in matte black |
| A phone shelf, round fittings | Round with shelf |
| A phone shelf, square fittings | Square with shelf |
| A holder to replace an old Clark one | Round |
Round against square
Both styles are metal and both come with a shelf in matte black. The Round has the full set of figures and the wider choice of finishes, so it is the easier one to plan around. The Square follows the square style Clark uses on its square accessories, so pick it when the towel rail, hooks and shower fittings are square, and the Round when they are round.
Matching your Clark tapware
Match the holder to the finish name on your tap and ignore the nearest colour. Clark's Round and Square holders share a name with its tapware shapes, but a holder and a tap are separate products, so match them by finish. Matte black, chrome and brushed nickel are the three finishes on this page.
Across the room
Carry the finish across the wall. Clark towel rails and Clark robe hooks share the finishes, and Clark bathroom accessories gathers the range. The toilet roll holders page shows every brand.