Double Robe Hooks

Robe hooks should be made from brass or zinc alloy with a high-quality PVD or electroplated finish to resist humidity and frequent use. Solid brass hooks with matte black, brushed nickel, or brushed gold PVD coating offer excellent longevity in the bathroom environment. Avoid cheap zinc hooks with thin plating, which can corrode or peel within 12–18 months in a humid bathroom.

Robe hooks are typically installed on the back of the bathroom door or on an adjacent wall near the entry. In an ensuite, hooks are often positioned inside the shower recess or near the towel rail area. Install at a height of approximately 1600–1700mm from the floor for adult use. Choose a number of hooks appropriate for the household, two hooks per user is a practical guideline.

The simplest approach is to buy your accessories from the same brand range as your tapware, many brands such as Phoenix, Caroma Urbane II, and Meir offer coordinated tap and accessory collections. If mixing brands, focus on matching the finish (e.g. brushed nickel or matte black) rather than the exact product range. Small variations in tone between brands are often barely noticeable in a finished bathroom.

Matte black has been the dominant finish for bathroom accessories in Australia for the past several years and remains very popular. Brushed nickel, brushed gold, and brushed brass are also strong choices for warmer or more luxurious interiors. Chrome remains the most versatile and classic option. For coastal homes, PVD-finished accessories offer the best long-term corrosion resistance.

A fully equipped bathroom typically includes a towel rail or heated towel rail, a toilet roll holder, a robe hook (or hooks), a soap dish or soap dispenser, and a toothbrush holder. In the shower, a shower shelf or niche is essential. For a cohesive look, choose all accessories from the same range and finish, most Australian accessory brands like Nero, Phoenix, Meir and Caroma offer complete coordinating sets.

A double robe hook is one wall plate or backplate with two separate hanging arms or knobs coming off it, installed as a single fixture rather than two hooks mounted individually. The practical difference is drilling: a double hook needs only one set of fixing points, so there's one hole pattern to get right rather than two, and the spacing between the hanging points is fixed by the product rather than something you measure out yourself. Two single hooks give you more flexibility in spacing them apart, but a double hook is faster to install and gives a neater, more deliberate look on the wall.

It suits a shared bathroom where two people each want their own hook, or anyone who regularly hangs two items in the same spot, a robe and a towel, or two towels side by side. It's also a practical choice for a smaller bathroom where there's really only one sensible spot on the door or wall for hanging items, since a double hook gets two hanging points out of that single location instead of needing a second spot elsewhere. A single hook remains the simpler choice for one person or one item.

The back of the bathroom door is the most common position, since it keeps both hanging points out of the way without using wall space. Beside the shower or bath is a common alternative, within easy reach for stepping out and drying off. Mount at roughly 1600 to 1700mm from the floor for adult use, and lower if the household includes children. Because both hanging points share one plate, there's no separate spacing decision to make the way there is when fitting two single hooks.

A double hook typically carries more combined load than a single hook, since it's often holding two full items rather than one, so checking for a stud or solid blocking behind the fixing point matters more here than on a single lightweight hook. Where a stud isn't available in the right spot, a heavy-duty wall anchor rated for the wall material and the combined weight of two wet items is the next best option. A licensed builder or the fixing hardware's stated rating can confirm what a given wall type will support.

Generally yes, the double configuration is available in the same range of finishes as single hooks, brass, brushed nickel, gunmetal, matte black and white among them, so the finish decision can be made independently of whether one or two hanging points is needed. It's worth choosing the finish to match existing tapware and hardware first, then confirming that finish is available in the double configuration, rather than the other way around.