Matte white toilets you can buy
Yes, you can get a matte white toilet in Australia, and this page holds the suites and pans in that finish. Some people write it as a matt white toilet. It is the same product, a white toilet with a flat, non-glossy glaze. The matte suites here come from Caroma, Turner Hastings and Bao, in the usual formats, and the plumbing measurements follow the same rules as they do for the gloss versions.
The finish changes how the toilet looks and does not change how it fits. The set out, the inlet position, the pan height and the projection are set by the pan, so check them before you choose a colour. The toilets page explains those measurements.
The finish on each suite
The Caroma Contura II and the Turner Hastings Fino have a matte white ceramic glaze. The Bao Elegant has a matte white glaze with an easy clean coating applied to the entire pan, including the full trapway and neck, where staining usually starts. Clean a matte toilet the way you would any other: with a pH neutral cleaner, and without bleach, ammonia or abrasive pads, which can damage a finish. Wipe the toilet dry after cleaning to limit mineral build up, and use mild soap and a soft cloth. If you have a specific cleaner in mind, check it against the care note for that suite.
Back to wall suites
The Bao Elegant raised height suite and the Turner Hastings Fino WhisperFlush are back to wall suites in matte white. The Bao Elegant has a pan height of 440mm and a projection of 670mm with a universal trap. The Fino has a pan height of 440mm, a projection of 680mm and a universal S or P trap with a set out of 100 to 190mm, and it comes with a thin or a thick seat and a choice of standard or Geberit valves. Both are rimless, and rimless toilets explains how that works.
Close coupled and concealed cistern suites
The Caroma Contura II and the Riviere are in matte white as close coupled suites, and both are also available with the Invisi Series II concealed cistern. The Contura II has a pan height of 440mm and a projection of 657mm as a close coupled suite, and a projection of 570mm in the Invisi Series II version. See the in wall concealed toilets page for what a concealed cistern needs. The matching flush plates and buttons are collected on concealed toilet buttons, and the Contura II has optional coloured buttons and hinge caps.
Wall hung and in-wall pans
The Contura II is also a wall hung suite in matte white, with a P trap, a pan height of 405mm and a projection of 535mm. The Bao Elegant and the Fino are in-wall pans in matte white, sold with cistern options. The Bao in-wall pan has a pan height of 405mm and a projection of 550mm, so read what is supplied before you order.
Living with a matte finish
Matte white is as easy to keep clean as gloss white. A matte surface does not show water stains or fingerprints as easily as a glossy one, though hard water marks can look chalky and skin oils can leave slightly shiny patches, so a quick dry wipe keeps the finish even. Avoid abrasive pads and harsh chemicals, and use mild soap and a soft cloth. The routine is mild soap, a soft cloth, a rinse and a dry, whatever the finish.
The Caroma matte range: Riviere and Contura II
The Riviere comes in white and matte white, with codes for the back entry close coupled suite, the right hand bottom inlet suite and the Invisi II suite. The Riviere collection brings together heritage and modern style to complement coastal, traditional, farmhouse and Hamptons interiors.
For the close coupled version, the overall height is about 870mm, the pan height 435mm and the projection 660mm. The set out range is 60mm to 200mm with 140mm recommended and up to 50mm of sideways adjustment. The cistern button is supplied in chrome, with black, brushed brass, brushed bronze, brushed nickel and gunmetal grey as other options. The seat is a soft close quick release thermoset seat with GermGard protection and stainless steel seat caps, with caps in black, brushed brass, brushed bronze or gunmetal grey as options. The pan and cistern are vitreous china, so the matte finish applies to the ceramic.
For the Invisi Series II version, the pan height is 435mm, the projection 570mm, and the recommended set out 90mm in a 60mm to 120mm range. The push buttons and access plate are supplied separately, so the colour of the flush plate is a separate choice. A matte white pan with a chrome plate and a matte white pan with a black plate look quite different.
The Contura II comes in white, matte white and clay. The seat is available in the same three colours, with stainless steel caps and brushed bronze caps as an option. In the close coupled suite, the pan height is 440mm and the projection is 657mm. In the Invisi II wall faced suite, the set out is 60mm to 120mm. In the wall hung suite, the trap is P trap only, and the pan fixes to a bracket that needs a non compressible wall.
Fixing the Contura II close coupled pan
The pan is universal for S and P trap installations, with a recommended S trap set out of 140mm from the finished wall and flexibility from 60mm to 200mm for existing soil pipes, plus 50mm of sideways adjustment from the Uni-Orbital connector. The centre line of the pan can be offset by up to 50mm from the soil pipe, and the installer marks it on the finished wall as a guide for the connection.
For bedding, the installer removes the tiles inside the foot area, mixes sand and cement 3 parts to 1 to a depth of 60mm, and levels the pan so that the back of the foot sits about 10mm above the finished floor. The cistern is placed on the pan to check it is level side to side and lines up with the tile edges, and the bed sets for at least 24 hours. For bracket fixing, the D82 concealed brackets sit on the pan centreline 280mm from the finished wall. A bead of acetic cured silicone sealant runs around the foot, and the finished sealant height is no more than 5mm.
For a bottom inlet, the flexible hose, which is not supplied, has to be fed through the side of the pan before the pan is installed. The pan screw must not be over tightened, because that may crack the pan foot, and the foot is supported until the sealant sets.
The Contura II wall hung suite in matte white
The wall hung Contura II suite has two product codes: one for in wall, in duct and in ceiling installation, and one for under counter installation. Each is available in white, matte white and clay. The pan is a wall hung rimless pan with a fully glazed 50mm back inlet, P trap only, unvented. The Invisi II cistern is pre assembled with its bracket and supplied with the flush pipe and a waste pipe suitable for a 90mm cavity wall. Structural brick wall systems require the cistern to be fixed to the wall, and for in wall applications with raised height cisterns an extension kit is provided.
The pan fixes to one of the wall hung brackets, and these bracket systems are suitable only where non compressible wall materials are used. That matters for a heavy ceramic pan in a tiled wall. The frame is 400mm to 420mm. The buttons and access plate are supplied separately in five finishes, and the colour of the plate is a separate decision from the pan.
The Turner Hastings Fino in matte white
The Fino WhisperFlush matte white suite with a thick seat has a matte white ceramic finish, with a duroplast quick release soft close seat and a universal S or P trap with a 90 degree adjustable pan bend. It is rated WELS 4 star at 4.3 and 2.9 litres, it is WaterMark approved, and it has a waste set out of 100mm to 190mm, and a larger set out of 190mm to 280mm when you buy the three piece pan bend, code APB350. The footprint is 565mm long by 360mm wide, and the water supply is universal, back or bottom. Keep the specification for the exact code with the plumber's paperwork. The Turner Hastings toilets page has more on the Fino.
The Bao Elegant in matte white
The Bao Elegant raised height suite in matte white has an easy clean coating that covers the whole pan, including the trapway and neck. It has an open rimless design that eliminates the pan lip, a raised height pan for ergonomic transfer on and off the toilet, a soft close seat with quick release, and a universal cistern for back or bottom entry plumbing. It suits S trap or P trap installation and is supplied with a pan connector. Ask us for the specification and how to care for the coating.
Finish does not change fit
The matte and gloss versions of a suite share their dimensions. The Riviere is white and matte white under the same codes and the same drawing, and the Fino comes in a gloss and a matte version with the same footprint and set out. So choose the suite for its set out, inlet and projection, and then choose the finish.
The finish does change one thing: matching. A matte white toilet beside a gloss white basin, or a white button on a matte pan, is worth checking together in the room's light. A matte glaze reflects less light, so how it reads depends on the lighting. If the toilet has to match a basin, a vanity top or a tile, ask us for a sample or a photograph taken in daylight, and compare it with the other pieces before the order is placed.
Brands and seats
The matte suites come from Caroma toilets, Turner Hastings toilets and Bao toilet suites. For a replacement seat, measure the pan first and see toilet seats. Ask a licensed plumber to fit anything connected to the water supply.

