Skip to content

Momo Brooklyn Cabinet Handles

12 Items

  • $4 Off RRP
    In Stock
    Momo Handles Brooklyn D Handle Brushed Bronze

    Momo Handles Brooklyn D Handle Brushed Bronze

    Checking delivery...
    $43
    $4 (-8%) OFF RRP of $47
    $4 (-9%) off RRP of $47
  • Momo Handles Brooklyn D Handle Brushed Black

    Momo Handles Brooklyn D Handle Brushed Black

    Checking delivery...
    $46
    $1 (-2%) OFF RRP of $47
    $1 (-2%) off RRP of $47
  • Momo Handles Brooklyn T Knob 55mm Brushed Bronze

    Momo Handles Brooklyn T Knob 55mm Brushed Bronze

    Checking delivery...
    $31
    $0 (-0%) off RRP of $31
  • Momo Handles Brooklyn Big Handle Brushed Black

    Momo Handles Brooklyn Big Handle Brushed Black

    Checking delivery...
    $190
    $1 (-0%) OFF RRP of $191
    $1 (-1%) off RRP of $191
  • Momo Handles Brooklyn D Handle Brushed Dark Brass

    Momo Handles Brooklyn D Handle Brushed Dark Brass

    Checking delivery...
    $46
    $1 (-2%) OFF RRP of $47
    $1 (-2%) off RRP of $47
  • Sale On Now!

    Sale On Now!

    Up to 70% off across the store, plus free towels and mirrors up for grabs on orders over $800*

    Shop the Sale
  • Momo Handles Brooklyn D Handle Black Titanium

    Momo Handles Brooklyn D Handle Black Titanium

    Checking delivery...
    $46
    $1 (-2%) OFF RRP of $47
    $1 (-2%) off RRP of $47
  • Momo Handles Brooklyn T Knob 55mm Brushed Dark Brass

    Momo Handles Brooklyn T Knob 55mm Brushed Dark Brass

    Checking delivery...
    $31
    $0 (-0%) off RRP of $31
  • Momo Handles Brooklyn Big D Handle Brushed Bronze

    Momo Handles Brooklyn Big D Handle Brushed Bronze

    Checking delivery...
    $190
    $1 (-0%) OFF RRP of $191
    $1 (-1%) off RRP of $191
  • Momo Handles Brooklyn Big Handle Brushed Dark Brass

    Momo Handles Brooklyn Big Handle Brushed Dark Brass

    Checking delivery...
    $190
    $1 (-0%) OFF RRP of $191
    $1 (-1%) off RRP of $191
  • Every door is an opportunity for considered design

    Every door is an opportunity for considered design

    Shop Door Hardware ->
  • Momo Handles Brooklyn Big Handle Black Titanium

    Momo Handles Brooklyn Big Handle Black Titanium

    Checking delivery...
    $190
    $1 (-0%) OFF RRP of $191
    $1 (-1%) off RRP of $191
  • Momo Handles Brooklyn T Knob 55mm Brushed Black

    Momo Handles Brooklyn T Knob 55mm Brushed Black

    Checking delivery...
    $31
    $0 (-0%) off RRP of $31
  • Momo Handles Brooklyn T Knob 55mm Black Titanium

    Momo Handles Brooklyn T Knob 55mm Black Titanium

    Checking delivery...
    $31
    $0 (-0%) off RRP of $31

Momo Handles Brooklyn Cabinet Handles Buying Guide


The Brooklyn is a zinc alloy range from Momo Handles with a repeating vertical groove down each piece. It comes as a D handle, a longer Big D Handle and a 55mm T knob, in Brushed Bronze, Brushed Black, Black Titanium and Brushed Dark Brass. The longest sizes pass a metre, so this range covers tall doors as well as drawers. You will find the measurements for each piece, what the groove does and what the very long sizes are for. The page also explains how they are fixed, how a plated zinc alloy finish wears, how to pick a size, and what to know about fitting, since screws are not included. For the whole brand, start at Momo Handles kitchen and bathroom handles, and for handles of every maker and material, cabinet handles.

What the Brooklyn range is

Vertical line detailing defines the range: a repeating groove that gives each piece depth and steady shadow lines. There are three formats, a T knob, a D handle and a Big D Handle, running from small fittings up to full-length pulls. The dark finishes go with matte lacquer, concrete-look or dark timber doors, and the dark brass and bronze go with warm oak, walnut and greige interiors. The whole range suits flat-front and Shaker-adjacent cabinetry.

The pieces, measured

The fixing distance is the gap between the two screw holes. Overall length is the whole handle, and projection is how far it stands off the door.

  • The Momo Handles Brooklyn D Handle is zinc alloy in three sizes: 170mm, 330mm and 1065mm long, on fixing distances of 160mm, 320mm and 528mm x 2. It is 10mm wide and projects 37mm. The longest size is fixed at two pairs of holes, each pair 528mm apart.
  • The Momo Handles Brooklyn Big D Handle, also called the Brooklyn Big Handle, is zinc alloy in two sizes: 466mm and 1074mm long, on fixing distances of 448mm and 1056mm. It is 17mm wide and projects 56mm.
  • The Momo Handles Brooklyn T Knob 55mm is zinc alloy, 55mm long and 10mm wide, and projects 37mm.

Every Brooklyn handle suits a handle thickness of 16mm to 25mm, has a plated finish and is sold without screws. The size list (55mm, 160mm, 320mm, 448mm and 1056mm) is the T knob length plus the fixing distances. For the D handle, the size in the name is the overall length, so a 170mm handle sits on 160mm centres. When you replace a handle, measure the holes in the door and ignore the length of the old one.

The long sizes

Few handle ranges reach this length. The D handle goes to 1065mm and the Big D Handle to 1074mm, which puts them on tall doors and wide fronts. Tall pantry doors suit long vertical pulls because they improve grip and balance the weight. Doors normally take knobs and drawers take pulls, but tall pantry, broom closet and appliance doors often want a long pull because of the door's scale. A full-height door takes a pull of 600mm or more, or two 256mm pulls stacked, and appliance pulls are 600mm and up.

The second pair of holes matters on the longest sizes. Fixed only at its ends, a pull over a metre long carries its load on two points. The 1065mm D handle has two pairs of holes, 528mm apart, which brings a fixing in near the middle. The 1074mm Big D Handle is fixed at 1056mm. Use a template for the holes, because you cannot adjust a long handle once they are drilled.

Neither long size is rated for appliances. Standard cabinet pulls are usually too light and thin for integrated appliances, so a fridge or dishwasher panel is better served by a pull made for the job. See appliance pull handles.

The D handle and the Big D Handle

A common rule says a pull should be about a third as long as the drawer front is wide, which gives a pull of about 200mm for a drawer 600mm across. The 170mm D handle on 160mm centres comes close. The 330mm D handle on 320mm centres suits a wide drawer, and drawers between 600mm and 900mm take 256mm to 320mm centres, or two 128mm pulls. The 466mm Big D Handle fits a still wider front. It projects 56mm, so check the clearance beside it. See D shaped cabinet handles.

The T knob

The T knob is 55mm long, 10mm wide and projects 37mm. Knobs take the fingers and a single screw and suit small doors and drawers, while pulls take the whole hand. A T knob sits between the two, giving a short bar to hold on a small door or a narrow drawer. See cabinet knobs.

Zinc alloy and a plated finish

Zamac, the alloy behind most zinc handles, combines zinc with aluminium, magnesium and copper. It has excellent castability and stable dimensions over time, and it is a lighter alternative to brass that holds up well and keeps a consistent finish. The metal itself needs protection. Die-cast zinc handles must carry a plated or powder-coated finish, because bare zinc shows white rust and pits. See zinc alloy cabinet handles.

The Brooklyn finish is plated. Treat the surface as plating. PVD is a vacuum process, and its coatings are sometimes harder and more resistant to corrosion than electroplating. Thin plating on zinc alloy usually wears at the grip within 18 to 24 months of daily use, which is a fair reason to wipe the grip area gently and often.

The gap between plating and PVD is plain. PVD colour is bonded to the base in a vacuum chamber and is significantly harder than traditional plating, while powder coating is paint-based and more prone to chipping. The Brooklyn is plated, so expect plating behaviour: a good surface when it is new and gradual wear at the grip. If the handles get used all day, on a pantry door or a busy kitchen drawer, that is the part to look after first.

The four finishes

Finishes sort by mood: warm metals such as brushed brass for traditional and transitional rooms, black for bold and modern ones, and nickel for cool and neutral ones.

Gold, brass and bronze pair with navy, charcoal, blue or green cabinetry, and matt black sits against light cabinetry as a contrast. The rule for mixing is to keep a room to two metals, repeat each at least twice so it reads as a decision, and carry one finish through the house.

Choosing by room

On a bathroom vanity, the 170mm D handle and the T knob are the sensible sizes. Bathroom fittings need wiping and drying more often than those elsewhere, since steam and moisture leave marks. The cabinets they fit are at bathroom vanities and furniture. In a kitchen, the 330mm D handle goes on drawers and the long sizes on pantry and tall doors, and a wardrobe takes the long vertical sizes. These are matches and not rules, and a sample held against the door settles it.

Choosing a size

128mm, 160mm or 224mm centres suit fronts between roughly 450mm and 700mm wide, and 256mm or 320mm centres, or two pulls, beyond that. Pieces that are too small look disconnected, and pieces that are too large take over the room.

For placement, a pull or knob sits 40mm to 60mm in from the edge that opens, near the bottom corner of an upper door and the top corner of a lower door. Pulls run horizontally on drawers and vertically on doors. With a projection of 37mm to 56mm, check the clearance wherever two doors open close together.

Where each piece goes

  • Narrow vanity drawer or small door: the 170mm D handle, or the 55mm T knob.
  • Standard kitchen drawer: the 170mm or 330mm D handle, depending on the width of the front.
  • Wide drawer or integrated appliance front: the 330mm D handle, the 466mm Big D Handle, or two of the shorter pulls.
  • Pantry, broom cupboard or wardrobe door: the 1065mm D handle or the 1074mm Big D Handle, set vertically.

Replacing handles, and fitting

When you swap handles, match the fixing distance. A new pull with the same distance drops into the old holes without drilling. Measure from the centre of one screw hole to the centre of the other. The Brooklyn distances are 160mm, 320mm, 448mm, 528mm and 1056mm, so check the old holes before choosing a piece.

Screws are not included, so buy them with the handles. Screw length depends on panel thickness: a 22mm screw for panels 16mm to 18mm thick, and a 38mm screw for panels 32mm to 34mm thick. The screw must bite into the handle and stop short of the door face. On the long sizes, use one screw at each fixing point.

Caring for plated handles

The plating is what you are protecting. Wipe a zinc alloy handle with a soft, dry cloth and keep abrasive cleaners and harsh chemicals away from it. Put the cleaner on the cloth and not on the hardware, and dry the handle straight away so water marks do not form. Thin chrome plating on zinc alloy pits faster under cleaners that contain acid or bleach. A coating wears first where the hand lands, so wipe the grip area more often than the rest.

Related pages

For the full brand, see Momo Handles kitchen and bathroom handles. For other types and materials, see cabinet handles, zinc alloy cabinet handles, appliance pull handles and cabinet pull handles.

Frequently Asked Questions

What types of cabinet handles are available for bathroom vanities?

Bathroom vanity cabinet handles come in bar pulls, knob handles, T-bar pulls, cup pulls, and edge pulls (for handleless drawer looks). Bar pulls in lengths of 96mm, 160mm, and 256mm are among the most popular in Australian bathrooms for their clean, contemporary appearance. Knobs are a classic choice for traditional or Hamptons-style bathrooms. The Blue Space stocks handles from brands including Momo Handles and Zanda in finishes to suit every style.

What size cabinet handle do I need?

Australian handles are generally measured by "hole centres", the distance between the two screw holes, measured centre to centre. Common sizes include 96mm and 128mm for kitchens, and 160mm becoming increasingly popular in modern builds. As a general guide, the 1/3 rule works well: your handle length should be roughly one-third the width of the door or drawer. So a 600mm-wide drawer suits a handle around 160–200mm, while smaller drawers under 300mm work best with a shorter 70–100mm pull or a knob.

Should I choose cabinet handles or knobs?

Both have their place, and many homes use a mix of the two. Handles offer a larger, more comfortable grip, making them ideal for drawers and heavier daily use. Knobs are simple to install, easy to clean, and suit cabinet doors or lower-traffic areas where a subtler look is preferred. A common approach is to use handles on drawers and knobs on doors, giving your kitchen, bathroom or laundry a considered, tailored finish.

Can I use the same cabinet handles in my kitchen, bathroom and laundry?

Yes, and many homeowners do this to create a seamless, considered flow throughout the house. That said, it's important to factor in environment: bathrooms and laundries are exposed to higher humidity and moisture, so finishes like solid brass with a PVD coating, stainless steel, or quality powder-coated options will hold up better than raw or untreated materials over time.

How do I replace cabinet handles without drilling new holes?

Measure your existing hole centres by checking the distance between the centre of each screw hole, then choose a new handle with matching hole centres. If you'd like to switch to a different style or size, options like backplates, edge pulls, or handles designed to cover old holes make it possible to update your look without redrilling your cabinetry.

How do I match cabinet handle finishes with my tapware and appliances?

For a cohesive, well-designed home, cabinet handles are best chosen to complement your tapware, sink and appliance finishes. Matte black handles pair beautifully with matte black tapware for a contemporary look, while brushed nickel or brushed brass options suit warmer, Hamptons-style spaces. If your appliances are stainless steel, brushed nickel or stainless handles will tie the room together. It's worth considering your whole space, kitchen, bathroom and laundry, for a consistent finish throughout the home.