Skip to content

Nidus ATZ Door Hardware

2 Items

  • Nidus ATZ Single Cylinder Deadbolt Stainless Steel

    Nidus ATZ Single Cylinder Deadbolt Stainless Steel

    Checking delivery...
    $270
    $0.75 (-0%) OFF RRP of $270.75
    $0.75 (-0%) off RRP of $270.75
  • Nidus ATZ Entrance Pull Handle Set Stainless Steel

    Nidus ATZ Entrance Pull Handle Set Stainless Steel

    Checking delivery...
    $560
    $0.96 (-0%) OFF RRP of $560.96
    $0.96 (-0%) off RRP of $560.96

Nidus ATZ door hardware buying guide


The Nidus ATZ is a stainless steel entrance pair: a single cylinder deadbolt and an entrance pull handle set with an external thumblatch and an internal lever. This collection holds both pieces. They are made for an external door, they open with a key from outside and a turn or lever from inside, and they are sold with four or five keys. This guide explains what each piece does, how a thumblatch pull differs from a lever set, how the deadbolt and the pull set work together, which door measurements decide fit, how to plan the keys and the security of the door, and how to fit and look after the hardware. For the wider Nidus range, see Nidus door hardware, and for other pull sets, see entrance pull sets and pull handles.

What the ATZ range is

The ATZ is built for a modern front door. Both pieces are stainless steel, which resists corrosion and wipes clean, and both share a plain, sleek design that the pull set complements modern architectural styles. The two pieces are meant to work together: the pull handle set gives you the grip, the thumblatch and the interior lever, and the deadbolt gives you a second, stronger lock on the door edge.

You can buy either piece alone. Many front doors have a handle and a separate deadbolt, which is the arrangement the ATZ follows. If you only need a deadbolt to add to an existing handle, the deadbolt on its own does that. If you need a new handle and lock together, the pull set does that, and the deadbolt adds extra security.

The ATZ single cylinder deadbolt

A deadbolt is a lock with a solid bolt that you throw by turning a key or a thumb turn. Unlike a spring latch, a deadbolt does not retract by pushing on the door, so it holds the door firmly when it is thrown. The ATZ deadbolt is single cylinder, which means you use a key on the outside and a thumbturn on the inside. It is heavy-duty construction for durability and long-lasting performance, and suits residential and commercial applications.

The deadbolt has a 62mm diameter design that suits a standard 54mm hole, so the outer ring covers the hole edge and gives a neat finish. The backset is 60mm, the distance from the door edge to the centre of the hole. It is supplied with five keys, enough for a household and spares. An installation instruction sheet can be downloaded from the product page.

What single cylinder means

A cylinder is the part that takes the key. In a single cylinder deadbolt, the key works on the outside only. On the inside there is a thumbturn, a small knob you turn with your fingers. This means you can leave the house quickly without finding a key, which is safer in an emergency, and you can lock the door from inside at night with one turn.

A double cylinder lock takes a key on both sides. It is harder to open from the inside through a broken pane, but it needs a key to leave. For a front door with glass nearby, think about which risk matters more to your household. The ATZ is the single cylinder type.

The ATZ entrance pull handle set

The ATZ pull handle set is a long pull for the outside with a thumblatch, and an interior lever. The external thumblatch and internal lever combination offers secure access with convenient interior operation. It also names a single cylinder deadbolt with key access from outside and a snib turn inside, which is the lock built into the set. It includes four keys.

The set is constructed from stainless steel for long-lasting performance and resistance to corrosion. The installation instruction sheet is linked from the product page. The design is sleek and suited to modern architectural styles.

How a thumblatch works

A thumblatch is a small lever on the grip of the pull handle. You grip the handle, press the thumblatch down with your thumb, and the latch withdraws so the door can open. When you let go, the latch springs back. It gives you a simple fixed pull on the outside while keeping a latch that the thumb controls.

That is different from a lever set, where the whole lever rotates, and from a plain pull, which has no latch and relies on a separate lock. The thumblatch is neat and keeps the outside face clean, with no moving lever. Inside, the door uses a lever to withdraw the latch, so you operate it in the usual way as you leave.

Snib on the inside

The lock has a snib turn inside. A snib is a small turn that holds the lock in the locked position from the inside. You turn the snib to lock the door and turn it back to unlock it, without a key. This is the inside control for the lock built into the pull set, and it matches the single cylinder idea: key outside, simple turn inside.

Use the snib at night or when you are at home. Use the key to lock from outside when you leave.

Using the deadbolt and the pull set together

The pull set has its own lock, and the deadbolt adds a second one. Two locks on a door give you two points of security, and many households use the deadbolt for night and the handle lock for day. You can also use the deadbolt alone as the main lock, with the pull set as a latch.

Plan the two locks together. The deadbolt is usually placed above the handle lock on the door edge, with enough space between them so the door is not weakened by cuts too close together. Your door maker or installer will set the positions. Give them the product pages for both pieces.

Door thickness and backset

The deadbolt lists a 60mm backset. That is a very common backset on Australian entrance doors, so the deadbolt suits many existing preparations. Measure the distance from the door edge to the centre of the existing hole to confirm. Check the installation sheet linked on the product page for the door thickness range the lock suits before you order.

The 54mm hole is the standard hole for a deadbolt. If your door has a hole of that size, the 62mm ring covers it neatly. If the hole is larger or damaged, the ring may not cover it, and you may need a different cover plate.

Keys and keying

The deadbolt comes with five keys and the pull set with four. That is plenty for a household, with spares. If the deadbolt and the pull set lock are supplied with different keys, you will carry two keys for one door. Ask your locksmith about keying them alike, so one key operates both. A locksmith can re-pin a cylinder to match another.

Keep a spare key somewhere you can reach if you are locked out, but not under a mat or in a plant pot. Give a spare to someone you trust.

Stainless steel and care

The ATZ is stainless steel, which resists rust and takes a brushed or satin finish well. It suits a covered entry and a coastal home. Wipe with a soft cloth and mild soapy water, then dry. Avoid abrasive pads and strong chemical cleaners, which can scratch the surface. In a coastal home, rinse salt off from time to time.

Lubricate the cylinder with a graphite lubricant if the key becomes stiff, and avoid oil, which collects dust. Check the screws from time to time, as a handle that loosens will wear the latch.

Security beyond the lock

A lock is one layer of door security. The door itself should be solid, the frame should be sound, the hinges should be strong and the strike plate should be fixed into the frame with long screws. A strong deadbolt in a weak frame does not secure the door. When you fit the ATZ, check the frame and the hinges at the same time. See hinges for hinges that suit an entrance door.

Good lighting and a clear view of the door from the street are also part of security. Think about the whole entry.

Matching the rest of the entry

The ATZ is stainless steel, so match it to other stainless steel on the entry, such as hinges, a door stop and house numbers. A stainless steel entry looks calm and consistent. See door stops for stops in a matching finish, and entry door lock sets for other entry options.

Common mistakes to avoid

The first mistake is ordering without measuring the backset and the hole. The second is forgetting to check the door thickness on the installation sheet. The third is placing the two locks too close together. The fourth is leaving the keys unmatched when a single key would suit. The fifth is treating the lock as the whole of the security. The sixth is skipping the strike plate and frame check.

A short list avoids all six: backset, hole, thickness, positions, keying and frame.

Our recommendation

For a modern front door that needs a new handle and a lock, choose the ATZ entrance pull handle set. For extra security or to add a deadbolt to an existing handle, choose the ATZ single cylinder deadbolt. For the strongest arrangement, use both and ask your locksmith to key them alike.

Measure the backset, check the hole and the thickness, and plan the positions with your door maker. Then the pair will fit and work as one.

Questions about Nidus ATZ door hardware

What is in the ATZ range?

A stainless steel single cylinder deadbolt and a stainless steel entrance pull handle set with a thumblatch and internal lever.

What backset does the ATZ deadbolt use?

It has a 60mm backset and a 62mm diameter design that suits a standard 54mm hole.

How many keys come with the ATZ?

The deadbolt comes with five keys and the pull handle set with four.

What does single cylinder mean?

The key works on the outside only. On the inside there is a thumbturn on the deadbolt and a snib turn on the pull set.

Can I use the deadbolt and the pull set together?

Yes. They are made to work as a pair, giving two locks on the door.

Frequently Asked Questions

What is a door handle set and what does it include?

A door handle set (also called a door lever set or door furniture set) typically includes the lever handles for both sides of the door, a rose or backplate, a spindle to connect the handles, and fixing screws. Some sets also include a latch or lock mechanism. In Australia, door handles must comply with AS 4145 standards for security and durability. The Blue Space stocks door hardware from Zanda, Lockwood, and other trusted Australian brands.

What is the most popular door handle style in Australian homes?

Contemporary lever handles with a round or square rose are the most popular style in Australian homes currently. Matte black and brushed nickel are the dominant finishes in new and renovated homes. Traditional rounded lever handles in polished chrome or brushed nickel suit classic and Hamptons-style homes. Choosing a consistent handle style and finish throughout the home creates a cohesive, well-designed result.

Can I use the same handle brand for both internal and external doors?

Many Australian handle brands, including Zanda, Lockwood, and Lane, offer coordinated range of interior and exterior handles that share the same design language and finish, allowing a consistent look from the front door through to every internal door and room in the home.

What is a dummy door handle?

A dummy handle is a non-functional door lever or knob that is decorative only, it does not operate a latch or lock. Dummy handles are used on doors that don't require a latch (such as double doors where one door is fixed, wardrobe doors that slide or swing without a latch, or decorative cabinet doors). They give the door the appearance of a complete handle set without the mechanical function.

What handle do I need for a sliding door?

Sliding doors require a specific type of handle, typically a recessed flush pull, a finger pull, or a surface-mounted sliding door pull. Because a sliding door doesn't have a hinge pivot point, standard lever handle sets don't apply. Flush pulls sit recessed in the door surface and are ideal for cavity (pocket) sliding doors. Edge pulls are mounted on the leading edge of the door for easy gripping.

What is a passage handle set?

A passage handle set includes two lever handles connected by a spindle that operate a latch, allowing the door to be opened from either side without a lock. Passage sets are used on internal doors where privacy is not required: hallways, living areas, home offices, and children's bedrooms. They are the most commonly used internal door handle set in Australian homes.

What is a privacy handle set and where is it used?

A privacy handle set includes a locking mechanism that can be engaged from inside the room, typically a simple push-button or turn-snib and can be unlocked from outside in an emergency using a small pin or coin. Privacy handles are used on bathroom, toilet, and bedroom doors where privacy is required but a keyed lock is not necessary.

What is an entrance handle set?

An entrance handle set is a door handle set designed specifically for the front or entry door of a home. It includes a keyed cylinder lock integrated into the handle or separate lockset, providing external security. Entrance sets are available in a range of styles from contemporary to traditional and must be rated for external use, exposed to the elements, with weather-resistant finishes.