What the Phoenix arm range is
A shower arm is the pipe that connects a head to the water supply in the wall or ceiling and holds the head where you want it. Phoenix makes arms in several ranges, and this collection holds them: wall arms, high-rise and upswept arms, slimline arms with a plate, ceiling arms in three lengths, a universal arm, and arm and rose sets. Most are the arm only, which means the head is a separate purchase.
What matters first is which arm reaches the height and the distance your shower needs. A purchase here comes down to the outlet height, the thread, the reach, the finish and the fitting. For arms from every maker, see shower arms. For the whole Phoenix line, see Phoenix showers. For the heads that go on them, see Phoenix shower rose.
The arm types at a glance
- The wall arm is a standard arm that comes out of the wall and holds the head at a set distance.
- The high-rise or upswept arm turns up after it leaves the wall, so the head sits higher.
- The slimline arm is a thin arm with a small plate at the wall.
- The ceiling arm drops from the ceiling and holds the head over the middle of the shower.
- The universal arm has an adjustable height.
- The arm and rose set holds the arm and a head in one box.
The basic types are a standard arm with an angle, a straight arm that suits rain heads, and a gooseneck or S-shaped arm that raises the head. The Phoenix arms follow the same logic with their own names.
Start with the outlet height
Check the height of the plumbing outlet before choosing. If the outlet is too high, choose a straight arm with a rain head. If the outlet is too low, choose a rising arm to lift the head. A fixed wall head sits at 2000 to 2100 mm above the finished floor to the centre of the arm outlet, and 2100 to 2200 mm for a tall household. So measure from the floor to the outlet, and compare it with the height you want the head to sit.
Wall arms: Vivid, Lexi and Rush
The Vivid wall arm is round, 400 mm long, in solid brass, with a PVD finish. It fits onto existing half inch plumbing, and it pairs with a 230 mm round rose in a set. The Lexi arm is the square version, also 400 mm, in solid brass with a PVD finish, designed to match the Lexi roses. See Phoenix Lexi for the full Lexi range. The Rush arm is rounded, with a classic look, and it is suitable for all standard half inch heads.
Wall arm projection runs 300 to 400 mm, so the 400 mm arms sit at the top of that range. A longer arm moves the head out over the shower floor and away from the wall. Choose the 400 mm arm when the head needs to clear the wall or a screen, and a shorter arm when the shower is narrow. A wall-mount arm keeps the head close to the wall, which suits compact showers.
Slimline arms with a plate
The Vivid Slimline arm is a thin arm with a small plate at the wall, in a round plate and a square plate version. The plate is 30 by 10 mm, in polished chrome or brushed gold, and the arm is a thin, elegant shape in solid brass. Slimline is the arm to choose when you want the arm to disappear. Keep the head to a sensible weight for a thin arm. A Vivid Slimline high-rise arm in brushed gold is also listed, and the high-rise design gives headroom for taller users.
High-rise and upswept arms
A high-rise arm solves the low outlet. The Rush high-rise arm has an upswept design with an overall length of 407 mm, a rounded profile and a PVD finish. The Vivid high-rise arm is the same idea in the Vivid shape. The Cromford high-rise arm and rose set comes with a 210 mm rose, and its overall height is 351.5 mm with a head 208 mm across. A gooseneck or high-rise arm raises the head, and it adds height without structural plumbing changes when the outlet is low.
That last point matters in a renovation, because moving a pipe in a tiled wall is a bigger job than fitting a longer arm. A high-rise arm does not cure every low outlet, so compare the rise with the height you need. For the full set with a head, see Phoenix shower rose.
Ceiling arms: Vivid and Lexi
A ceiling arm hangs the head directly overhead, away from the wall. The Vivid ceiling arm comes in 150 mm, 300 mm and 450 mm lengths, in brass with a PVD finish. The shortest has an arm length of 151 mm and an overall length of 163 mm, the 300 mm arm an overall height of 313 mm and the 450 mm arm 466 mm. The Lexi ceiling arm is square, with a square plate at the ceiling, and it has an overall length of 321 mm for the 300 mm arm and 471 mm for the 450 mm arm.
The choice of length depends on the ceiling. A short arm suits a lower ceiling, and the head on a ceiling arm sits at 2100 to 2200 mm, depending on the ceiling. Ceiling-mount arms hang from overhead and suit rounded or rose heads for a rainfall effect, and they take more vertical space and work best with a high ceiling. So subtract the head height from the ceiling height, and choose the arm that lands the head at the right level. For the wider choice, see ceiling showers.
The Lexi universal arm
The Lexi universal arm has an adjustable height, which gives a personalised shower experience. It suits a wall where the outlet is not at the standard position, or a household that wants to change the height of the head. An adjustable arm adds a joint, so fit it into solid backing and keep the head to a sensible weight. For the matching heads, see Phoenix Lexi.
Are all shower arms universal, and are they a standard size?
No. Arm lengths run 100, 200, 277, 300, 340, 400 and 450 mm, and the shapes include right-angle square, curved rectangle, round curve, upswept, gooseneck and high-rise. So arms vary in length and in shape. What is common is the connection: the Phoenix arms fit onto existing half inch plumbing and suit standard half inch heads. So an arm and a head usually fit each other, and the things that differ are the length, the rise, the shape and the finish.
Finishes and what they are made of
The arms are solid brass. The finishes are chrome, matte black, brushed nickel, brushed gold, brushed carbon (also called gun metal), brushed bronze and brass. The process is PVD on the Vivid, Lexi and Rush high-rise arms and on the Slimline gold, and electroplating on the Cromford set in some versions, so confirm it on the one you choose. PVD is significantly harder and more durable than traditional plating. For finish-led browsing, see chrome showers, black showers, brushed nickel showers, gold showers and gunmetal showers.
Pressure, flow and the star rating
An arm has no star rating, because it passes the water and does not control the flow. The rating belongs to the head you fit. Where an arm has a pressure rating, it is an operating pressure of 150 to 500 kPa. Pressure is easy to test with a 10 litre bucket and a timer. A fill in under 60 seconds is a good sign, and large overhead heads suit supplies above about 200 kPa.
Replacing an arm
Swapping an arm like for like, on the same outlet, is a simple job. Turn the water off first and protect the finish with a cloth between the wrench and the arm. Unscrew the head, slide the flange away from the wall, and unscrew the old arm anticlockwise. Wipe old thread tape from the fitting in the wall. Wrap new thread seal tape clockwise two to four times around the thread of the new arm, screw it in clockwise until it is secure, slide the flange back and fit the head. Turn the water on and check for leaks. If it drips, tighten slightly or add tape.
Call a plumber for leaks that will not stop, a cracked or rusted pipe, a stuck arm, a ceiling-mounted install, or any change to the outlet. The rules on what an owner may do themselves differ by state. For a new height of outlet, the plumber should set it at rough-in, before tiling.
How to clean a Phoenix arm
Use warm soapy water for modern finishes. Vinegar is acceptable only on standard chrome or plastic, and acid can cause discolouration or peeling on matte black, brushed gold, gunmetal, brushed nickel and other PVD or electroplated finishes. Wipe the arm with a soft cloth, and dry it. The head is the part that needs a cleaning schedule, which is monthly in hard water and every two to three months in soft water.
How to choose a Phoenix arm
- Measure the height of the wall outlet and the height you want the head to sit.
- Pick the type: wall, high-rise, slimline, ceiling or universal.
- Select the length: 400 mm for a wall arm, 150, 300 or 450 mm for a ceiling arm, and check the ceiling height.
- Match the shape to the head, round or square, and check the half inch thread.
- Choose a finish to match the head, and read whether it is PVD or electroplated.
- If you need a head in the same box, choose an arm and rose set.
- Book a licensed plumber if the outlet changes.
The outlet height and the head you intend to fit decide the arm type and length, and the finish comes last.

