What the Fienza Kaya shower range is
Kaya is a Fienza range built around a very thin round head. The overhead heads are 2 mm thick and 250 mm across, with a brass swivel joint, easy-clean TPR nozzles and a PVD finish. The range is wider than most in this cluster. It has twin systems on a rail, a retrofit twin, rails with a hand shower, gooseneck and ceiling dropper sets, round overhead heads, wall arms, hand showers and handheld heads. The finishes are chrome, matte black, brushed nickel, gunmetal, urban brass, brushed copper and matte white, and not every product comes in all seven.
Start with the format that suits your wall. The checks that decide a purchase are the water inlet, the sizes, the material, the flow and the care. For the whole Fienza line, see Fienza showers. For the Kaya range as a whole, including taps and accessories, see the Fienza Kaya range.
The Deluxe twin
The Deluxe twin is the flagship. It has a PVD finish, an integrated top water inlet and diverter, a slider that adjusts the height and angle of the hand shower, and solid brass construction with a 250 mm overhead. The overhead is rated 4 star at 7 litres per minute and the hand shower 5 star at 6, registration S16669, with an operating pressure of 150 to 500 kPa. The overall height is 950 mm, the arm length 344 mm, the projection 370 mm and the distance between the fixing points 528.5 mm. The hand shower has two spray options. The box holds the overhead arm, the hand shower, the shower head, the hose, a fixing kit and the instructions.
These are the lowest flows in the range, so the Deluxe twin suits a household that wants to cut water use and has enough pressure for a thin head. Choose it for a new wall or a rework where the top inlet suits the plumbing. For the wider choice of twins, see double shower heads.
The Retrofit twin
The Retrofit twin is made to slot into an existing shower recess without a full re-plumb. It pairs a slim 250 mm overhead with a separate hand shower on an adjustable rail, with a built-in diverter and a separate inlet. The rail is 19 mm, in stainless steel and brass, with an adjustable slider, and the hose is a 1.5 m flexible stainless steel one. The hand shower has three spray settings, named normal, massage and combination, and a 122 mm head. Both outlets are rated 3 star at 9 litres per minute, registration S48469, with 150 to 500 kPa. The overall height is 1011 mm, the arm reach 446 mm and the fixing points 750 to 850 mm.
Choose the Retrofit twin when the water already comes from a separate outlet in the right place and you want a twin without moving it. The fixing range of 750 to 850 mm is wide, which helps when old fixing holes are in the tile. The box holds the sliding rail, the overhead, the hand shower with its hose, and the instructions.
The twin rail
The twin rail pairs a 250 mm overhead with a hand shower on one brass rail, with an integrated top inlet and diverter. The overall height is 1233 mm, the arm length 355 mm, the projection 542.5 mm and the distance between the fixing points 650 mm. The rail is brass, the overhead is stainless steel and the hand shower is ABS. Both outlets are rated 3 star at 9 litres per minute, registration S15835. The box holds the rail with the overhead, the slider, the hand shower, the hose, the shower head, a fixing kit and the instructions.
The rail shower, with no overhead
The rail shower is a hand shower on a rail, rated 3 star at 9 litres per minute, registration S15837. The overall height is 703 mm, the arm length 387.5 mm, the projection 50 mm, the head diameter 120 mm and the adjustable length between the wall fixings 400 to 550 mm. It is solid brass with a slider that adjusts the height and angle, and a single water-flow setting. The box holds the rail, the slider, the hand shower, the hose, a fixing kit and the instructions. Choose it to add a hand shower to a wall that already has a fixed head. For other rails, see shower on rails.
The gooseneck, arm and ceiling dropper sets
Each of these is a 250 mm overhead head sold with its own arm. The head is 2 mm thick, in stainless steel with a brass swivel joint, a flange included and a female 1/2 inch BSP inlet. The gooseneck set has an overall height of 299 mm, an arm length of 350 mm and a projection of 475 mm. The shower arm set is 147 mm high, with 387.5 mm of arm and 512.5 mm of projection. The ceiling dropper set is 355 mm high, with 353 mm of arm and 353 mm of projection. All three are rated 3 star at 9 litres per minute, with 150 to 500 kPa, and the box holds the arm, a fixing kit and the instructions.
Clean the chrome gooseneck set with mild soapy water and a microfibre cloth. A gooseneck is an arm that raises the head, which is the point of the gooseneck set. Select the shower arm set for a standard wall, the gooseneck for a low outlet, and the ceiling dropper for a head over the middle of the shower. See ceiling showers and shower arms.
The round shower head and the wall arm
The round shower head is the same 250 mm, 2 mm head on its own, with a brass swivel joint, a flange and a female 1/2 inch BSP inlet. It is 55.5 mm high, rated 3 star at 9 litres per minute, registration S15704. The wall arm is rounded and curved, 400 mm long with a flange, in lead-free stainless steel, and its box holds the arm, a fixing kit and the instructions. Choose these two to build your own overhead, or to replace one part of a Kaya set. The thin head suits a flat, modern line, and the swivel joint lets you tilt it after fitting. For other overheads, see rain showers.
Hand showers and handheld heads
The Kaya hand shower comes with a rectangular plate or a round plate, with an all-in-one water inlet and mounting bracket, in solid brass. Both are rated 3 star at 9 litres per minute with a 120 mm head. The rectangular plate is registration S15995, 297.5 mm high with a projection of 61 mm. The round plate is S16569, 287.5 mm high with a projection of 80 mm. Each box holds the hand shower, the wall bracket, the hose, a fixing kit and the instructions. The handheld shower head is a lighter ABS piece with a male 1/2 inch BSP inlet, a 120 mm head and an arm of 252.5 mm. It is rated 3 star, S15838, and comes with a fixing kit.
Choose the hand shower with a plate when you want a bracket and hose in one box. Pick the handheld head when you are fitting it to an existing hose or arm. See hand held shower heads for the wider choice.
Brass, stainless steel or ABS?
The material changes by product. The rails and the hand showers on a plate are solid brass. The overhead heads, the gooseneck sets and the arms are lead-free stainless steel, with a brass swivel joint. The handheld heads are ABS, and so is the hand shower on the twin rail. Stainless steel and brass resist corrosion better than ABS, so the heads and arms are the durable parts and the ABS pieces are the light ones.
The star ratings differ by model
The Deluxe twin is 4 star on the overhead and 5 star on the hand shower. The other Kaya products are 3 star at 9 litres per minute. Confirm the registration number for the version you choose, since the version sets the rating. A head of 7.5 litres per minute or less earns 4 stars if it passes the spray force and coverage tests, and the band for 3 stars is more than 7.5 to 9.0 litres per minute.
How high a Kaya shower should be
The top of a rail sits about 1800 to 1900 mm above the finished floor, and a wall mixer about 1000 to 1100 mm. A fixed wall head sits 2000 to 2100 mm up, or 2100 to 2200 mm for a tall household. A head on a ceiling arm sits at 2100 to 2200 mm, depending on the ceiling. Leave at least 20 cm of clearance between a rain head and the user's head. Confirm the heights at rough-in, before the wall is tiled. A diverter system needs two outlets at different heights, so tell the plumber before the linings go up.
Finishes and what they are made of
The Kaya finishes are chrome, matte black, brushed nickel, gunmetal, urban brass, brushed copper and matte white, and PVD is the process for most of them. PVD is significantly harder and more durable than traditional plating. For finish-led browsing, see chrome showers, black showers, brushed nickel showers, gunmetal showers, brushed brass showers and white showers.
How to clean a Kaya shower
Clean regularly with mild soapy water and a microfibre cloth, and keep harsh detergents, bleach, cream cleaners and citrus-based cleaners away. Dry the fitting after use, since drying prevents mineral deposits and water marks. On matte black, avoid abrasive cleaners, scouring pads, bleach, vinegar and lemon juice, because acid can damage the coating over time and dull the finish. The TPR nozzles on the heads rub clean.
Fitting a Kaya shower
A rail with a top inlet or a separate inlet is plumber work in practice, since the inlet, the fixings and the height all have to be right. Rail and ceiling rain installations are best left to a licensed plumber, who can ensure correct fitting, good pressure and compliance. Plan for two people to lift the twin rail. Fix into solid backing, since a 250 mm overhead and a full hose add weight at the end of the arm.
The rules on what an owner may do themselves differ by state. A like-for-like head swap on an existing half inch arm is a simple job. Turn the water off at the shower valve and unscrew the old head anticlockwise. Clean the threads, wrap new thread seal tape clockwise two to three times, hand-tighten, give it one gentle turn with a wrench and check for leaks.

