Inset basins buying guide
An inset basin, also called a drop in basin or top mount basin, is fitted into a cut-out in the benchtop, with the rim sitting visible above the surface and the bowl hidden in the cabinet below. Semi-inset basins sit partly into the bench and project above it. This page holds inset and semi-inset basins from Caroma, ADP, Clark, Fienza and Kaskade, in ceramic, solid surface and stone composite, in oval, round, rectangular and square shapes. The guide below covers what the type is, how the names differ, what it needs from the benchtop, and what to check about tap holes, overflow and waste.
What an inset basin is
An inset basin is fitted into a precisely cut hole in the benchtop so that it sits flush with, or slightly proud of, the surface, then sealed against leaks and connected to the drain and the tap. The visible rim shields the edge of the benchtop from water, spills and everyday wear. The appeal is in one line: an inset basin gives you the best of both worlds, under bench space and an above counter look. Because the basin uses no extra surface area, the bench around it stays clear, and the flush fit leaves no hard-to-reach gaps, so it wipes clean easily.
Inset or semi-inset
An inset basin sits just above the benchtop with most of the basin hidden in the cabinet, and a semi-inset basin is partly hidden in the cabinet and partly above the benchtop. Semi-inset suits floor-mount vanities because it keeps the basin low. The Fienza Sarah and the ADP semi-inset basins sit above the counter for an above counter look. Because the names are used loosely, check the basin's size and how much of it sits above the bench. A basin that projects past the front of a shallow cabinet is a semi-recessed basin, which has its own page.
Inset against above counter and undermount
The difference with an above counter basin is how much of the bowl shows. An above counter basin needs only a drain hole, which leaves the benchtop largely intact, and the raised bowl reduces splashing. Its exposed underside collects dust and water spots and the curved join can trap grime, which an inset basin's flush fit avoids. The difference with an undermount basin is the rim: an undermount basin sits beneath the bench so the benchtop runs unbroken, while an inset basin keeps a visible rim and suits more benchtop materials. Inset basins suit natural stone, timber and high-gloss finishes. If you want the rim hidden, choose undermount; if you want an easier install on a bench you have already chosen, choose inset.
Tap holes and tap landings
The tap hole count is on every product page. A basin with one tap hole takes a basin mixer on the bowl, a basin with three takes a three-piece set, and a basin with none takes a mixer on the bench or a wall mixer. A tap landing is a raised area on the basin for mounting the tap, and some models come with and without one. The Caroma Urbane II and Luna come with and without a tap landing. The Contura II inset has a tap landing and one tap hole, and the Riviere inset comes in one and three tap hole versions. The Tribute inset is available with one tap hole, and the Clark round inset comes with a tap landing. Tap choice depends on the pre-drilled holes: a mixer, wall mounted or pillar taps. See basin mixers and bathroom basin taps.
Overflow, plug and waste
Some inset basins have an overflow and others do not. The Caroma Riviere inset with overflow holds 3.5 litres and includes a plug and waste, and the Clark inset basins have an integrated overflow. The Fienza Sarah semi-inset has no overflow and no tap hole. The Caroma Urbane II has no overflow. Plug and waste inclusion differs by maker. Caroma basins include a flush fitting waste or a matching ceramic pop-up, and Clark basins include a chrome pop-up plug and waste. The ADP semi-inset basins and the Fienza Sarah are sold with the plug and waste separate, with the Fienza at 32mm. See basin wastes.
Basin sizes
The Caroma Liano II round inset is 400mm across and 125mm high with a 7.5 litre bowl, and the Liano II pill is 530mm by 350mm and 120mm high. The Contura II pill inset is 530mm by 400mm and 180mm high with a 4 litre bowl, and the Tribute inset comes in a 420mm size. The Caroma Riviere is 530mm by 370mm and 182mm high, or 595mm by 450mm and 190mm high, and the Urbane II is a 500mm basin. The ADP Faith is 495mm long and 255mm wide, with a 4 litre bowl, sits 45mm above the benchtop and has a short projection suited to ensuite vanities. The ADP Dignity is a 495mm by 365mm oval semi-inset basin. The Kaskade Arundel is a 385mm round stone semi-inset basin with an 8mm rim. See small hand basins for compact sizes.
Shape, material and care
Inset basins come in oval, round, D-shaped and rectangular shapes, with oval suited to smaller spaces, round giving a soft look and rectangular a sharp, angular look. See oval, round, rectangular and square basins. The range is mostly ceramic, in vitreous china and fine fire clay, with solid surface from ADP and stone composite from Kaskade. Clean with mild soap and a soft cloth and avoid abrasive cleaners and harsh chemicals. Dry spills, because a scratch in glazed ceramic cannot be repaired.
The Caroma Riviere inset basins in detail
The Riviere is the largest group of inset basins on this page, and its figures run to more detail than most. The Riviere inset vanity basin with no tap holes is nominally 530mm by 370mm and 182mm high, and holds 8.6 litres, with overflow not available. The Riviere inset vanity basin with a tap landing is larger: it is 595mm by 430mm and 189mm high, and the bowl holds 3.5 litres. The landing takes the tap on the basin, so the footprint grows and the usable bowl shrinks, which is the trade-off to see in the numbers.
The tap landing version comes in four forms: one tap hole or three tap holes, each with no overflow or with an overflow, as four product codes. No overflow is the standard option and an overflow is available as a special order. So the versions on this page with the words with overflow are the special order versions, and the others have none. The Riviere suits general purpose, domestic and commercial applications, is ceramic, and comes in white and matte white. The collection brings heritage and modern style together and suits coastal, traditional, farmhouse and Hamptons interiors.
Semi-inset basins from ADP, Fienza and Kaskade
The page also holds semi-inset basins, which sit partly above the bench. The ADP Zeya is a solid surface rectangle, 580mm long and 320mm wide, holding 10 litres, sitting 50mm above the benchtop and coming with an overflow. The ADP Faith is a solid surface rectangle, 495mm by 255mm, holding 4 litres, sitting 45mm above the benchtop, and it suits ensuite vanities because it has a short projection. The Fienza Reba is a round semi-inset basin in fully vitrified ceramic with no tap hole and no overflow, needing a 32mm plug and waste sold separately. The Fienza Sarah is a rectangular semi-inset in gloss white ceramic with no tap hole or overflow. The Kaskade Arundel is a 385mm round stone basin standing 50mm above the bench.
The height above the bench is the figure that separates these from a full inset basin. A basin that stands 45 to 50mm above the bench shows its upper rim and bowl edge. If the bench height is fixed, those few millimetres matter for the rim height and for splashes. See semi-recessed basins for the type that overhangs the front of the cabinet.
Square and geometric inset basins from Caroma
The Caroma Carboni inset basin has a subtle square design and a flush fitting chrome waste, and the inset design gives both under bench space and an above counter look. The Caroma Teo 2.0 450 has a geometric form with square styling and a thin rim, and it is made in Italy. The Caroma Tribute rectangle inset 530 and square inset 400 are covered in detail on the Caroma Tribute basins page, with the maker numbers for their capacities and the rule that the supplied template must be used.
Which inset basin has which overflow
Because the inset range mixes overflow and non-overflow basins, read the overflow line on each. The Riviere basins have no overflow as standard and an overflow as a special order. The Contura II inset has none. The Luna inset has an overflow only. The Liano II inset basins have none, and the Liano II 580 under or over counter basin is offered with and without. The ADP Zeya has an overflow and the Fienza Reba has none. A basin with an overflow needs a slotted waste and a basin without one needs an unslotted waste. With no overflow slot, turn the tap off before the bowl fills. See basin wastes and Liano II basins with overflow.
Brands on this page
Browse Caroma basins, ADP basins, Clark basins, Fienza basins and Kaskade stone basins for the full ranges.
How to choose
- Decide how much of the bowl should show: an inset or semi-inset basin shows the rim and part of the bowl, an undermount hides the rim.
- Check the benchtop can be cut and sealed, and get the cut-out size from the basin's specification sheet.
- Read the tap hole line and the tap landing, and choose the mixer to match.
- Read the overflow and the plug and waste lines, because they differ between makers.
- Choose the shape and the finish with the tapware.
The bathroom basins page sets inset basins beside the other types, wall hung basins covers the type that needs no bench, and bathroom vanities covers the cabinets that carry the bench.


