How to choose a Caroma toilet
This collection covers the Caroma toilet suites and pans across the Luna, Urbane II, Contura II, Liano, Riviere and Profile ranges, plus the Aire Concorde connector suite. They share a few traits. Every suite with a stated rating carries a 4 star WELS rating, with a 4.5 litre full flush and a 3 litre half flush. Most use a universal trap, which lets one pan fit either an S trap or a P trap set out. What changes from range to range is the shape, the pan height, the cistern arrangement and whether the bowl is rimless.
If you are new to the measurements that decide fit, the buying guide on the main toilets page covers set out, inlet position and projection. This page assumes you know your numbers and want to pick a range.
What Cleanflush means
Cleanflush is Caroma's rimless bowl and flush design. It is Australian designed and patented, with no closed rim under the bowl edge, so there is no hidden channel where residue collects. Three flow components shape the flush, and they aim to wash the whole bowl and limit splashback. Read the benefit as easier wiping and a bowl you can see into.
Not every pan on this page is rimless. The Caroma Luna wall faced suite has a glazed box rim and trap, and the Luna Cleanflush suite is the rimless version in that range. The Caroma Cleanflush collection groups the rimless pans, and the Luna Cleanflush page covers that range alone.
What separates the ranges
The ranges differ in lines, height and cistern style rather than in how they flush, so the choice is mostly about the room.
Luna is the plainest of the ranges. The pan height is 395mm without the seat. The universal trap covers S trap set outs of 60 to 185mm on the wall faced suite and up to 205mm on the Cleanflush version, with a P trap set out of 185mm. Luna also has Slim and Square variants and a close coupled Cleanflush suite, and the Caroma Luna range collection brings them together.
Urbane II has a taller pan, at 440mm without the seat. The range includes a compact wall faced pan with a 500mm projection that takes a P trap only and a back inlet only, which suits a short room but needs the plumbing to match. It also includes a bidet suite, covered below. See the Urbane II toilets and the wider Urbane II collection.
Contura II has a curved shape, a raised easy height pan at 440mm, and finishes that include matte white and clay. The universal trap covers an S trap set out of 60 to 200mm and a P trap set out of 185mm using the supplied connector. The Contura II suites have their own page.
Liano is available in an Easy Height version with a 435mm pan, and the Caroma Liano range collection holds the full set. Riviere pairs a wall faced pan with a close coupled cistern, with a back entry or bottom inlet and a 435mm pan, in matte white and white. See Caroma Riviere.
Profile II is a close coupled suite, and the Profile 4 is the skew trap suite, built for a waste outlet on the left or right of the pan instead of the usual S or P position. Moving a skew waste to an S or P position is a plumbing job, which is why a pan made for that layout avoids the work.
Aire Concorde is a connector suite with a vitreous china pan and a lightweight plastic cistern. The set out is adjustable, and you pick the S trap or P trap version on the product page. That makes it a practical fit for a replacement where the existing waste position is awkward. The inlet is bottom entry.
Trap, set out and the Uni-Orbital connector
A universal trap pan fits either an S trap or a P trap installation. Several Caroma pans add a Uni-Orbital connector, which lets the pan position move within a 50mm radius and often decides whether a replacement is straightforward. Contura II and Riviere suites also include a D82 fixing bracket. Installation must follow AS/NZS 3500.1 and AS/NZS 3500.2, and the cistern must be matched with a compatible Caroma Smartflush pan to reach the 4.5 and 3 litre flush and the 4 star rating. Always read the set out line on the product page. It differs between ranges, and a few suites have a single figure or a variable range with a recommended value.
Concealed cisterns and Invisi Series II
Invisi Series II is the concealed cistern system. The cistern sits in the wall, the pan is wall faced or wall hung, and only the flush plate shows. The Invisi Series II collection and the in wall concealed toilets page cover the format. Some pans are sold on their own, to be paired with a cistern you choose, so check what is supplied before you order.
The flush button on a concealed cistern is chosen separately. The Riviere Invisi II buttons come in brushed bronze, brushed brass, brushed nickel and chrome, and the Contura II suites offer optional coloured buttons and hinge caps. Browse the Caroma concealed toilet buttons to match the plate to the rest of the room.
Wall hung pans
The Contura II and Liano wall hung suites run on Invisi Series II. The Contura II wall hung suite lists a P trap and a 535mm projection. A wall hung pan hangs off a frame in the wall and leaves the floor clear underneath. It needs the wall prepared before it is sheeted, so decide early. See wall hung toilets for the format across all brands.
Water use and flush volumes
The Caroma toilets with a stated rating are 4 star under WELS, with a 4.5 litre full flush and a 3 litre half flush, a 3.5 litre average. WELS rates a toilet from the water used by four half flushes and one full flush, and more stars mean less water. Rules for new homes and replacements can differ by state, so confirm the rating that applies to your project. Every toilet sold in Australia has a half flush and a full flush. Where a Caroma toilet shows no flush figure, as on the Profile II, ask us for it.
Smart toilets and bidets
The Urbane II wall faced close coupled bidet suite puts a full bidet function in a conventional footprint. Water and air temperature, flow and nozzle position adjust from the remote, with oscillating and pulsating modes. The seat is heated and opens and closes automatically, and the suite has LED night lighting and a deodoriser. The projection is 700mm and the set out is 225mm, so check both against the room. See Caroma smart toilets and bidet seats for the full set.
Seats, comfort height and accessibility
Complete suites come with a soft close seat with a quick release hinge. The Contura II and Riviere boxes contain the pan, cistern, seat, fixing kit and installation instructions. The Aire Concorde comes with a standard hinge seat and a plastic cistern with elongated chrome buttons. If you need a replacement seat later, the Caroma toilet seats collection has them.
The Contura II raised easy height pan is easier to use for anyone with restricted movement, and the Liano also comes in an Easy Height version. For a bathroom planned around accessibility, see accessible toilets and plan the clear space beside the pan first.
Caring for a Caroma pan and seat
Most of the pans here are vitreous china with a glaze, and the care rules are those for any glazed toilet. Clean weekly with a mild, non-abrasive bowl cleaner and a soft brush. Avoid scouring pads, steel wool and wire brushes, which can dull the glaze. Keep in-tank cleaners and chlorine drop-ins out of the cistern, because they can damage the flush valve and the rubber parts. Wipe any cleaner splash off the seat hinges, the hinge caps and the flush buttons at once, since plated and PVD finishes mark more easily than ceramic.
GermGard, where named, is an antimicrobial treatment on the seat or the pan. It is a surface treatment, so it does not replace regular cleaning. Cleanflush is a rimless design with no closed rim for residue to collect under, which makes the bowl easier to wipe, but the trap pipework at the back of a close coupled suite still needs cleaning. For model-specific cleaning advice, use the care sheet that comes with the suite.
Close coupled, back to wall or wall hung
The format changes how the toilet looks and what the install involves. A close coupled toilet sits with the cistern on the pan, and it is the simplest to fit in a replacement. A back to wall toilet sits against the wall or a concealed cistern, so the back of the pan is hidden and the floor is easy to clean around it. A wall hung pan lifts the pan off the floor and leaves the floor clear underneath. A rimless pan of any format is easier to wipe, and the rimless toilets collection shows the options across brands.
What to confirm before you order
- The set out, and whether the pan suits an S trap, a P trap or both.
- The inlet position and the height of the supply.
- The pan height, and whether an easy height pan suits the household.
- The projection, checked against the room.
- Whether the product is a complete suite or a pan only, and what comes in the box.
- The flush plate or button finish, if the cistern is concealed.
- The power point for a bidet suite.
A Caroma bathroom often includes more than the toilet. See Caroma bathroom accessories and Caroma towel rails for fittings in the same finishes, and the Caroma brand collection for the full range.
Keeping the bathroom consistent
The Riviere styling and proportions suit mixing with other Caroma ranges. If you are planning a full Caroma bathroom, choose the toilet early, before tiling or framing, so the plumber can set the waste and wall depth to suit. A different brand or a different format is a decision for the main toilets page.


