Clark taps buying guide
Clark tapware covers the basin, bath, shower, kitchen and laundry in a few clearly separate ranges, and this page holds the Clark taps we sell: basin mixers, shower and bath mixers, wall sets, spouts, three piece sets, sink mixers and washing machine taps. They come in matte black, chrome and brushed nickel, with lead-free brass bodies. The guide below sets out the ranges, what each suits, how to judge the build of a tap, and what to measure before you order.
Choosing a Clark range
The range decides the look, because it sets the handle, the spout and the body shape across the room. These are the main ranges on this page.
| Range | Style | Suits |
|---|---|---|
| Round | Round bodies with a pin, square or low lever, and a blade handle | Modern and family bathrooms. See Clark Round. |
| Cross | Classic cross handles, with lead-free three piece and wall sets | Traditional and Hamptons rooms. See Clark Cross. |
| Lever | Simple lever handles on wall sets | Easy-grip use and clean modern rooms. See Clark Lever. |
| Square | Square plates and sharp lines | Contemporary rooms with square tile |
Pick one range for the room, and carry it through the basin, the shower and the bath outlet, because the handle and the finish are designed to match within a range. For the whole brand, start at the Clark collection.
Types of Clark tap
The brand collection covers most fittings in the house. Here is where to compare each type across brands.
- Basin mixers suit most vanities with one tap hole. See basin mixers.
- Three piece sets pair a central spout with separate hot and cold handles. See three piece taps.
- Wall basin and bath sets keep the bench clear. See wall basin and bath mixer sets.
- Spouts serve a bath or a basin. See Clark spouts and swivel bath spouts.
- Shower and bath mixers control the shower and bath. See shower mixers.
- Gooseneck and standard sink mixers serve the kitchen. See gooseneck sink mixers.
Is Clark a good tapware brand
Judge a tap by its build, not by the badge. For any Clark tap, check four things on the product page: a brass body, a ceramic disc cartridge, lead-free construction and a WELS rating that suits your pressure and use. The Clark taps here are lead-free or DZR brass, with ceramic disc cartridges, and ratings of 4 or 5 stars. DZR means dezincification resistant, which is brass made to resist corrosion from the inside. A tap that meets all four is a sound choice for a family bathroom, and a plumber can fit and service it as they would any mixer.
Pin, square and low handles on the Round range
The Round range has several handle shapes on the same round body. A pin handle is a slim, upright lever with a minimal look. A square handle has a flat, squared profile for a sharper line. A low handle sits close to the body for compact basins and tight spaces. Choose the handle for how you use the tap: a longer pin lever is easier to grip, and a low handle suits a small vanity where a tall lever would hit the mirror. The body and finish are the same across them, so the set still matches.
Cross handles and traditional rooms
The Cross range suits a traditional or Hamptons bathroom with a shaker vanity, a pedestal basin or subway tile. A cross handle gives separate hot and cold control and a classic look. A three piece basin set with cross handles gives the symmetrical look that period rooms rely on, and a bath set with the same handles continues it. Cross handles need a firm grip to turn, so choose the lever range if anyone in the house has a weak grip.
Replacing existing Clark taps
The hole matters more than the style. Keep the existing layout where you can: a mixer replaces a mixer in the same hole, and a three piece set replaces a three piece set at the same spacing. Measure the hole, the spacing and the height under the bench for the hoses. A bench mounted or basin mounted tap is among the quickest bathroom updates, because a plumber can work from under the vanity. In a shower or bath, check whether the existing in-wall body suits the new trim before you order.
Clark taps for the basin
A basin mixer is the main choice: one lever sets temperature and flow, and most fit a single tap hole of 35mm. Reaches on this page run from about 110mm on compact mixers to about 252mm on long spouts. The stream should land near the centre of the bowl, not on the rim, so match the spout height to the basin: a standard mixer for an undermount or inset basin, a tall mixer for a bowl on the bench. Check the lever can swing to full hot and full cold without touching the wall or the splashback.
A three piece set suits a traditional vanity with three holes. Replacing a three piece set with a single mixer needs a cover plate, or a basin with one hole. A wall mounted set needs the pipe centres to match and the plumbing in the wall before tiling.
Clark taps for the bath and shower
For the bath, a wall mounted spout or a swivel spout serves a built-in bath, and a swivel turns to serve a basin beside it. Check the projection so the water lands well inside the tub, and the height so it clears the rim. For the shower, a mixer controls temperature and flow with one handle, with the body in the wall and the trim on the front. Some Clark shower sets come with a diverter that sends the water to the shower or the bath spout. Confirm that the trim matches the in-wall body, because bodies differ between makers.
Clark taps for the kitchen and laundry
A gooseneck sink mixer gives height for tall pots and large bowls, and a standard mixer is the simple choice. Check the spout height against any overhead cabinet and the reach against the sink. Kitchen and laundry spouts suit a trough or a bench where a mixer is already fitted. In the laundry, washing machine taps shut off the supply to the machine, and a quarter turn handle makes them easy to use. See laundry taps for the full group.
Finishes
Clark taps come in three finishes. Chrome is the easiest to match and clean, and it suits white tiles and classic rooms. Matte black gives contrast against pale tiles, white basins and timber, and Clark has a range of it, so see Clark black tapware and black taps. Brushed nickel is soft and muted and hides marks, and see brushed nickel tapware. Chrome and matte black are electroplated, and brushed nickel is mostly PVD, which resists scratching and tarnish. Keep one finish through the room, and limit it to two finishes with one leading.
Cartridge, body and lead-free rules
We recommend a solid brass body and a ceramic disc cartridge. A ceramic disc cartridge uses two ceramic plates to control the water, resists wear and shuts off cleanly for years. The National Construction Code limits lead in plumbing products that touch drinking water to 0.25 percent from 1 May 2026, and most Clark taps here are lead-free brass. Check WaterMark approval on the product page, and use a licensed plumber to fit the tap.
Water use and pressure
WELS is the Australian water efficiency label, and more stars means the tap uses less water. The Clark taps here carry 4 or 5 stars, and the rating is on each product page. Mains pressure gives you the most choice. Low pressure and gravity fed systems need a tap rated for it, and a plumber can check the pressure at your tap.
Mounting and measuring
Choose the mounting first, then how easily the tap can be serviced, then the look. Hob mounted taps sit on the basin or bench and are the easier fit in a renovation. Wall mounted taps keep the bench clear and need the in-wall plumbing planned before tiling. Measure the hole size, the pipe centres on a wall set, the basin depth and the clearance to the mirror before you order.
Caring for Clark taps
Wipe the tap with a soft microfibre cloth and warm water, and add a little mild soap if needed. Dry it so water does not set on the surface, which matters most in hard water areas. Avoid bleach, harsh sprays, abrasive pads and scourers, which dull a finish and can strip a coating. If a tap drips at the spout, a new cartridge is the usual fix.
What comes in the box
The contents depend on the tap. A basin or sink mixer comes with the mixer, installation instructions and an installation kit. A wall spout or a basin and bath outlet comes with a fixing kit. A shower mixer comes with a handle, a dress plate and an in-wall kit, and a three piece set comes with a spout, a hot tap and a cold tap. Read the product page for the exact list before you order.
Matching Clark taps across the room
Keep the main fittings in one range and one finish: the basin mixer, shower, bath outlet and kitchen tap. Clark finishes are matched within a range, and a different range or brand can differ slightly in tone. For the wider group across brands, see taps.


