Hand Towel Holders Buying Guide
A hand towel holder gives the towel by the basin a permanent place, so it stays off the floor and off the vanity. Hand towel holders come as rings, rails, and rail-style holders, and each suits a different towel and a different stretch of wall. This page covers all three, in stainless steel, brass and metal, from Caroma, Phoenix, Fienza, Nero, Meir and Clark. Pick the form first, then check the hanging length against your towel, then match the finish. The same fittings are also called hand towel racks, hand towel hangers and guest towel holders.
Ring, rail or holder?
A ring is compact. It holds a folded towel on a round or rectangular wall plate and takes the smallest footprint. A rail is a bar that holds the towel across its length, so it suits a towel that needs more hanging room. A guest towel rail is a shorter rail for a smaller towel.
Towel size decides which form fits. A hand towel is about 40cm by 70cm and hangs on a permanent ring, bar or hook next to the sink for daily use. A guest towel is smaller, about 30cm by 50cm, and is folded or draped for visitors. A ring is the natural home for a folded hand towel. A rail suits one hung across its length, and a short rail suits a guest towel.
Hand towel rails
The hanging length is the figure to check, because it is the length of bar that actually carries the towel. The projection tells you how far the rail stands from the wall.
| Rail | Overall length | Fixing distance | Hanging length | Projection |
|---|---|---|---|---|
| Caroma Liano II hand towel rail | 293mm | 250mm | Not given | 75mm |
| Caroma Riviere hand towel rail | 294mm | 250mm | 206mm | 75mm |
| Meir Curvaé guest towel rail | 328mm | 300mm | 272mm | 64mm depth |
| Fienza Kaya single hand towel rail | 300mm | 245mm | 225mm | 78mm depth |
| Fienza Tono single hand towel rail | 300mm | 260mm | 220mm | 70mm |
| Clark round single towel rail | 340mm | 300mm | 280mm | 75mm |
| Phoenix Gloss hand towel holder | 386mm | 354mm | 322mm | 66mm |
| Nero Mecca hand towel rail | 235mm | 189mm | Not given | 77mm |
| Nero New Mecca hand towel rail | 240mm wide | 100mm | Not given | 65mm |
Towel rings
A towel ring suits a small wall and a folded towel. The Caroma Liano II ring is 180mm across and projects 50mm. The Caroma Riviere ring is 180mm across, projects 55mm and stands 197mm high. The Nero York ring is 180mm long and 199mm high, and the Nero Classic ring is 186mm in ring diameter. The Fienza Kaya ring is 188mm long and 78mm deep on a four-point wall mount. The Nero Dolce II ring is 203mm long and projects 77mm, and the Nero Zen ring is 240mm long and projects 67mm. Dorf, Meir, Modern National, Fienza Lillian and Caroma Cosmo rings are in the range as well.
Hand towel holders
The Phoenix holders are short rail-style holders. The Vivid MKII is 217mm long and projects 49mm. The Wiltern is 208mm long and projects 66mm. The Cromford is a round holder 208mm across, and the Radii round plate holder is 210mm long, projects 55mm and has a 90mm hanging length. The Radii SS 316 holder is 213mm long and 118mm high, in marine grade 316 stainless steel. The Fienza Tono holder is 250mm long and projects 60mm, and the Fienza Empire Slim holder is 221mm long and 73mm deep.
More ranges and their details
The Caroma Urbane II hand towel rail is stainless steel with dual fixings. The Caroma Luna rail has dual fixings in chrome, satin black, brushed nickel and brushed brass. The Caroma Cosmo rail (235mm) and ring are polished chrome and suit plastered and tiled bathrooms. The Caroma Contura II rail is 272mm wide and projects 83mm. The Meir Round guest towel rail is 270mm wide in solid brass with a PVD finish, and the Meir Harrington guest rail is brass, 241mm long, on a 47mm round plate. The Clark square hand towel rail is 430mm wide and projects 90mm in matte black.
Phoenix makes the Vivid Slimline rail with a concealed fixing in an electroplated finish, and the Nostalgia and Festival holders in brass. The Radii holder is brass and installs with two screws. The Fienza Lillian ring is brass in chrome, black or brushed nickel, and the Opal ring is solid brass. The Nero York ring is brass with a 48mm round plate, projects 78mm, and keeps robes and towels within easy reach. The Dorf Kip ring can be installed in tiled or plastered bathrooms, and the Luxe ring has a square design in brass.
Which one suits your wall?
| Your situation | Form to look at | Why |
|---|---|---|
| Small wall beside the basin | Ring | Smallest footprint, holds a folded towel |
| A towel that needs more hanging room | Rail | Holds the towel across its length |
| A guest towel of about 30cm by 50cm | Guest towel rail | A shorter rail for the smaller towel |
| A wall that is narrow beside the vanity | The shorter rail or a ring | A shorter rail suits a narrower wall |
| A tiled wall | Any, with the fixings checked | Confirm the wall type and fixings first |
Where to put it
Mount the holder within easy reach of the basin, so the towel does not end up on the floor. Measure the wall space beside the vanity before you choose, because a shorter rail suits a narrower wall than a longer one. Check for pipes and cables behind the wall before drilling. Check the hanging length against the towel before you order.
Fixing
The fixing decides how firmly the holder stays on the wall under a wet-handed tug. The Caroma Riviere and Liano II rails and the Liano II ring use three-point fixing, and the Fienza Kaya ring and rail use a four-point wall mount. The Meir Curvaé guest rail has dual wall fixing, the Meir Harrington guest rail has built-in wall fixings, the Phoenix Vivid Slimline rail has a concealed fixing, and the Clark and Nero Zen holders use dual fixed concealed brackets, which leave no screws showing. Confirm the wall type and the right fixings before installing, or ask a plumber or handyperson. Some products ship with a fixing kit and installation instructions.
A few details separate the rails. The Fienza Kaya rail has a no-spin design, fully concealed fixings behind circular cover plates and a four-point wall mount, and it needs no hex key to install. The Fienza Tono rail is a fixed length and cannot be removed or adjusted, and the Phoenix Gloss rail cannot be cut down to size, so the length you buy is the length on the wall. The Phoenix Radii holder installs with two screws. In the box, the Caroma, Phoenix, Dorf, Clark and Modern National holders list a fixing kit, and the Nero holders list an install kit with instructions. Check each product page for its box contents before you order.
Materials and finish
Stainless steel is the common choice for a wet room. The Nero Mecca and Classic holders and the Caroma Liano II rail are 304 stainless steel, and the Phoenix Radii SS 316 and Nero Zen are marine grade. Phoenix Radii and Fienza Tono holders are brass, and the Fienza Kaya is stainless steel and zinc. Most finishes are PVD, a coating that resists wear and holds its colour, and the Phoenix Wiltern and Clark rails are electroplated. For marine grade fittings, see outdoor accessories.
Finishes by range
| Range | Finishes |
|---|---|
| Caroma Liano II | Black, brass, bronze, brushed nickel, chrome, gold, gunmetal |
| Caroma Riviere | Brass, bronze, brushed nickel, chrome |
| Meir Curvaé | Black, brass, bronze, brushed nickel, champagne, chrome, gold, gunmetal |
| Fienza Kaya | Black, brass, bronze, brushed nickel, chrome, gold, gunmetal, white |
| Fienza Tono | Black, brushed nickel, chrome, gold, gunmetal |
| Phoenix Vivid MKII | Brass, bronze, brushed nickel, chrome, gold, gunmetal |
| Phoenix Wiltern | Brushed nickel, chrome, gold, gunmetal |
| Nero Mecca ring | Black, brass, brushed nickel, chrome, gold, gunmetal, white |
| Nero Zen | Brass, bronze, brushed nickel, gold, gunmetal |
| Caroma Urbane II rail | Black, brass, brushed nickel, chrome, gold, gunmetal |
| Caroma Luna rail | Black, brass, brushed nickel, chrome, gold |
| Caroma Contura II rail | Black, brass, bronze, brushed nickel, chrome, gold |
| Meir Round guest rail | Brushed nickel, champagne, chrome, gunmetal |
| Phoenix Radii holder | Black, brass, brushed nickel, chrome, gold, gunmetal, and stainless steel in the SS 316 version |
| Phoenix Gloss holder | Black, brass, bronze, brushed nickel, chrome, gold, gunmetal |
| Phoenix Nostalgia holder | Black, brushed nickel, chrome |
| Nero York ring | Black, brass, brushed nickel, chrome, gold |
| Clark single towel rail | Black, brushed nickel, chrome |
| Caroma Cosmo ring | Black, chrome |
Match the finish to the tapware and the other accessories in the room. To see more fittings in one finish, browse chrome bathroom accessories, black bathroom accessories or brushed nickel bathroom accessories.
Heated rails
Every holder on this page is unheated. Heated towel rails are a separate product with their own page, so look there if you want a warm towel.
Where to go next
For a full-length towel, see towel rails and racks, single towel rails and double towel rails. For a robe or a towel on a hook, browse towel and robe hooks, and for the matching holder next to the toilet, toilet roll holders. The wider set of fittings is on bathroom accessories.


