Indigo bathroomware: Alisa and Savina tapware, Ciara fittings and Cali and Ridge toilets
Indigo is a bathroomware brand made for the home renovator, with simple, modern pieces that fit existing plumbing. The ranges in stock now are Alisa and Savina tapware, Ciara showers and fittings, and the Cali and Ridge toilet suites. The metal pieces are chrome and matte black, and the toilets are gloss white.
People search for it as Indigo bathroomware. This page is the guide to the brand and its ranges, and the pages below hold the full sets. For tapware see Indigo taps, for showers see Indigo showers, for toilets see Indigo toilets and for fittings see Indigo bathroom accessories.
The Indigo ranges
| Range | What it covers | Where to see more |
|---|---|---|
| Alisa | Wall basin and bath mixer 270mm, bath and basin spout 270mm, bath and shower mixer with diverter | Indigo taps |
| Savina | Wall basin and bath mixers 180mm and 225mm, bath and basin spouts 180mm and 225mm, bath and shower mixer with diverter | Indigo taps |
| Ciara | Hand shower with adjustable bracket, ceiling shower arm 300mm, toilet roll holder, 40mm bottle trap | Indigo showers, Indigo bathroom accessories |
| Cali and Ridge | Close coupled rimless toilet suites, including a raised height suite | Indigo toilets |
Alisa and Savina tapware
Alisa and Savina are wall mounted tapware in DZR brass, a dezincification resistant brass made for tap bodies, with a 35mm ceramic disc cartridge. The wall basin and bath mixers, and the bath and basin spouts, are rated WELS 4 star at 7.5 litres a minute. The difference between the two ranges is the shape and the spout reach: Alisa has a 270mm reach, and Savina comes in 180mm and 225mm, with a measured reach of 188mm and 228mm. Choose the reach from the distance between the finished tile surface and the centre of the drain, so the water lands in the middle of the bowl or the bath.
| Piece | Reach | Rating |
|---|---|---|
| Alisa wall basin and bath mixer | 270mm | WELS 4 star, 7.5 L/min |
| Savina wall basin and bath mixer | 180mm or 225mm (188mm and 228mm measured) | WELS 4 star, 7.5 L/min |
| Alisa bath and basin spout | 270mm | WELS 4 star, 7.5 L/min |
| Savina bath and basin spout | 180mm or 225mm | WELS 4 star, 7.5 L/min |
| Alisa and Savina bath and shower mixer with diverter | Not applicable | Wall mixer, no rating required |
Planning the wall
Wall mixers, wall taps and spouts go into the wall before the tiles, so settle the position, the spout reach and the finish while the wall is open. Measure from the finished tile surface to the centre of the drain to choose the reach, so the water lands in the middle of the basin or the bath outlet and clears the rim. Check what sits behind the wall, and fix the body to a nogging or a bracket so it holds. Waterproofing behind the body matters, because a missed seal is a leak inside the wall that cannot be fixed without opening the tiles.
Reading the WELS rating
WELS is the Australian water efficiency label, and more stars means the fitting uses less water. A basin mixer can reach 6 star because a basin needs little water. A kitchen mixer sits at 4 or 5 star because a sink needs a larger flow to fill a pot, and a shower sits at 3 or 4 star because the flow has to be large enough to rinse. Wall mixers and shower taps do not require a rating of their own. Read the rating on the exact piece you are buying, and use a licensed plumber to fit it.
Ciara showers and fittings
The Ciara hand shower comes with an adjustable bracket and is rated WELS 3 star at 9 litres a minute. The Ciara ceiling shower arm is 300mm, which lets a head hang from the ceiling above the shower. The Ciara fittings match the rest of the Indigo range: the toilet roll holder is 150mm long, projects 83mm and has a 50mm round plate, and the 40mm bottle trap replaces a plain plastic trap under a basin with a metal one in the same finish. Choose the finish to match the tapware.
Shower heights and positions
Mark the shower positions on the wall frame before the lining goes up. The centre of a fixed head outlet is usually 2000mm to 2100mm above the finished floor, or 2100mm to 2200mm for a tall household, and a ceiling mounted rain head sits at 2100mm to 2200mm depending on the ceiling height. Wall arms project 300mm to 400mm, and a ceiling arm can be 100mm to 600mm long. A mixer goes at 1000mm to 1100mm from the floor, and a diverter system needs two outlets at different heights, so the plumber must know both before the wall is closed.
Cali and Ridge toilets
The Cali and Ridge suites are close coupled and rimless, with a gloss white glaze and a dual flush of 4.5 and 3 litres, rated WELS 4 star. A rimless bowl has no rim under the lip, so there is no hidden edge for dirt to collect and the bowl cleans in one wipe. The Cali is a universal suite that handles back entry or bottom inlet, in an S trap or a P trap set out, so it fits most existing plumbing. The Cali II is a raised height suite, 870mm high, with a seat that sits higher for easier use.
| If you want | Choose | Reason |
|---|---|---|
| A swap for an existing toilet | Cali or Ridge universal suite | Fits back or bottom entry, S or P trap |
| A higher seat | Cali II raised height, 870mm | Easier to sit and stand |
| A rimless bowl | Any Cali or Ridge suite | No hidden rim to clean |
Check the position of the waste outlet and the distance from the wall before you order, because a universal suite has a range of set out, and the plumber should confirm that the suite fits the pipe that is already in the floor or the wall.
Replacing a toilet with a universal suite
An S trap sends the waste out through the floor, and a P trap sends it out through the wall. A back entry suite takes the water supply from behind the cistern, and a bottom inlet suite takes it from below. A universal suite is made to fit either set out, so a renovator does not have to move the plumbing to fit the new suite. Measure from the wall to the centre of the waste outlet, check which way the water enters the cistern, and ask the plumber to confirm that the suite fits the pipe in place before you order.
The 40mm bottle trap
A bottle trap sits under a wall hung or pedestal basin where the pipework shows. The Ciara trap is 40mm, so it suits a standard 40mm basin waste, and it replaces a plain plastic trap with a metal one in the same finish as the tapware. Check the waste size on the basin before you order, and have the plumber fit it, because the trap sets the height of the outlet and the final connection to the wall.
Renovating one fitting at a time
Indigo suits a staged renovation, because the ranges are built to match each other. A wall mixer in the shower can be replaced first, and the spout, the hand shower and the fittings can follow in the same finish later. Keep a list of the finish name for each piece, since a second order months later should match the first. Where the room is being replumbed, set every wall position at rough-in, so the later pieces drop into the right place.
Finishes
The metal pieces come in chrome and matte black. Chrome is bright and plain and suits most bathrooms, and matte black is flat and strong against pale tile. The toilets are gloss white. Not every finish is made in every piece, so check the finish on the exact piece, and keep one finish across the mixer, the shower and the fittings so the pieces agree.
Caring for the tapware
Wipe the spout and handles with a soft microfibre cloth and warm water, and add a little mild soap if needed. Dry them so water does not set on the surface, which matters most in hard water areas. Keep bleach, harsh cleaners and abrasive pads away from the finish, since they dull plated and coated surfaces. Clean the aerator if the spray turns uneven, and wipe brushed finishes along the grain.
Choosing the range
Choose Alisa or Savina from the look of the spout and the reach you need, since the controls and the function are the same. Choose Ciara for the shower and the fittings, because it matches both tapware ranges. Choose Cali or Ridge for the toilet from the plumbing already in the room, and the height from the people who use it. A renovator replacing one fitting at a time can keep the chrome finish across all of them and stay consistent.
Before you order
Choose the finish across the room first. Match the spout reach to the distance from the wall to the drain, settle the wall positions and the shower heights at rough-in, and confirm the trap and the outlet position for a toilet before you order. Read the rating on the exact piece, because the flow differs between a wall mixer, a shower and a toilet.

