Ingrain mirrors buying guide
Ingrain mirrors come in a short list of repeating pieces: round, arch, pill and rectangle. The frame is matte black, brushed nickel or brushed gold aluminium, or ash timber, or there is no frame and the light sits behind or in front of the glass. That makes the range easy to choose from once you decide three things in order: the frame or finish, whether the mirror needs to be lit, and the shape and size for the wall. The sections below take each in turn.
The Ingrain range by frame
The plain framed mirrors have an aluminium frame and 5mm copper-free glass. The matte black group includes the Ingrain Round Matte Black Framed Mirror at 800mm and the Ingrain Pill Shaped Matte Black Framed Mirror at 460mm by 910mm. It also has the Ingrain Rectangle Matte Black Framed Mirror at 750mm by 900mm and the Matte Black Arch Shaped Full Length Mirror at 1500mm by 600mm. The brushed nickel group has the round in 600mm and 800mm, the arch at 500mm by 900mm, the pill, the rectangle and a full length arch. The brushed gold group matches it. All the framed mirrors are 38mm deep.
The timber framed mirrors come in an ash timber finish: the Ingrain Timber Framed Arch Mirror at 600mm by 1000mm, the Ingrain Timber Framed Rectangular Mirror at 600mm by 1000mm and the Ingrain Timber Framed Round Mirror at 800mm, all 31mm deep. For the finish groups see Ingrain brushed gold mirrors and Ingrain timber framed mirrors, and for the unlit set Ingrain non LED mirrors.
The black frame
The most searched Ingrain finish is black, and the matte black frames are the match. Black-framed mirrors create contrast against lighter walls and fixtures, work as a focal point, suit monochrome palettes or bold accents, and work in any shape. Black also cuts through pale tiles and matches black brassware. For black tapware see black taps.
Brushed nickel and brushed gold
Finish by finish, brushed brass and gold match brass taps and accessories and contrast with black fittings, and chrome suits traditional and modern bathrooms alike. Match the mirror finish to taps and accessories for a cohesive look, or contrast on purpose. Brushed gold is the match for brass. A gold tap with nickel handles is a deliberate contrast. For brass tapware see brushed brass taps.
The lit Ingrain range
Every lit Ingrain mirror has a touch sensor with stepless dimming, a built-in demister, 6500K light and IP44. The frontlit mirrors send light toward the face, which helps reduce shadows under the brow, nose and chin. The backlit mirrors light the wall behind the glass, which gives a halo and suits modern rooms. One mirror, the Ingrain Pill Frameless Frontlit and Backlit LED Mirror, does both from one touch sensor. No LED mirror replaces ceiling light.
The type pages cover each in depth. See Ingrain frontlit mirrors with demister, Ingrain backlit mirrors with demister, Ingrain frontlit and backlit mirrors and Ingrain LED mirrors.
Round, arch, pill and rectangle
The round mirrors come in 600mm and 800mm, and the frameless frontlit round in 700mm or 800mm. Round is a soft circle that contrasts with straight lines, and large rounds work as focal points. The arch is 500mm by 900mm, and it softens hard lines and adds height and depth. The pill is 460mm by 910mm, or 500mm by 850mm and 500mm by 900mm when lit, an elongated oval that works horizontally or vertically. The rectangle is 750mm by 900mm plain and 600mm by 800mm lit, the classic, versatile choice.
For the shape groups see round mirrors, arched mirrors, pill shape mirrors and rectangular mirrors.
The full length arch
The full length arch is 1500mm by 600mm, 38mm deep and portrait only, in matte black, brushed nickel or brushed gold. It can be wall hung or used as a floor standing mirror, and it looks good propped against a wall at the end of a hallway. It is the one Ingrain mirror that is not for a vanity. For the full length group see full length mirrors.
Size against the vanity
The clearest width rule is this: when the mirror is not the same width as the vanity, make it 70 to 80 per cent as wide, and 60 to 70 per cent when sconces share the wall. On a 600mm vanity that is a mirror about 420mm to 480mm wide. On a 900mm vanity it is about 630mm to 720mm, and on a 1200mm vanity about 840mm to 960mm.
Turn the rule around for the Ingrain widths. A 460mm pill suits a vanity about 575mm to 655mm wide, a 500mm arch or lit pill suits one about 625mm to 715mm, and a 600mm round or timber arch suits one about 750mm to 855mm. An 800mm round suits one about 1000mm to 1145mm, and a 900mm wide rectangle suits one about 1125mm to 1285mm. Tape the outline to the wall and look at it from the doorway.
Height on the wall
Hang the mirror so its centre meets your eyes. Put the centre at 1500mm to 1650mm from the floor, with 100mm to 200mm between the tap and the base of the mirror and the top edge at least 100mm below the ceiling. A mirror needs to reach about 30cm above and below the eye line of its users.
Which Ingrain mirror for which room
The lit mirrors match the type to the room. Frontlit suits windowless bathrooms, dark tile and shared family bathrooms, and backlit suits remodels with textured or feature walls and bathrooms that already have good task lighting. Light walls and glossy tile reflect more light, and dark walls can make the backlight more decorative than useful. A narrow frontlit mirror over a wide vanity can leave the edges dim, so match the width as well as the type.
Upright or sideways
Each mirror hangs one way or both. The arch, pill and full length mirrors are portrait only. The round has no direction. The plain 750mm by 900mm rectangle hangs portrait or horizontal, and the timber rectangle hangs either way. The lit rectangle hangs either way in brushed gold and frameless, and horizontally only in brushed nickel and matte black. Check the orientation line before you buy, because the wiring position changes with the direction.
Wiring the lit mirrors
The lit mirrors require hardwired installation by a licensed electrician. They should be installed and tested by a qualified electrician in accordance with current local regulations, must be earthed, and must have a means of disconnection from the supply in the fixed wiring. The product conforms to AS/NZS safety standards, any timer or switch has to sit in the right zone for its IP rating, and the mirror is for indoor use only.
The controls are simple. The touch sensor glows blue when inactive and white when active. A short press turns the mirror LED on, pressing and holding while white gives stepless dimming, and a long press while blue turns off the button light. The demister heats fully in 3 to 5 minutes and turns off automatically after 60 minutes if left on.
Small bathrooms and powder rooms
A mirror 600mm to 900mm tall suits most single vanities, and 150mm to 200mm should stay clear above a mirror from cabinets or exhaust fans. A 500mm arch or a 600mm round fits a compact vanity without crowding the corners, and several tall, skinny mirrors can emphasise the height of a space. In a small room use one or two finishes, so a black frame with black tapware, or a gold frame with gold tapware, is enough.
Using the lit mirrors safely
A few more rules apply to the lit mirrors. They are for indoor use only, at an ambient temperature of 25 degrees. They are not for use by minors, or by people without experience or knowledge, unless supervised or instructed by someone responsible for their safety. Do not stare at the operating light source for long periods. The plain mirrors need none of this, and they hang on screws and hangers like any other framed mirror.
Hanging the mirrors
Installation takes four steps. Mark two screw positions on the wall aligned with the mirror's mounting plate holes, using a tape and a spirit level. Drill the holes and insert wall plugs, then screw in the screws provided, leaving 4 to 5mm exposed. For lit mirrors turn off the main power and connect the wires. Hang the mirror on the screw hangers and check it works. The plugs supplied suit stone or brick walls but not wooden walls, so use suitable anchors for other walls, and screw into studs where possible.
Cavity anchors suit plasterboard without a stud, and a mirror over 100cm should be lifted by two people, which covers the 1500mm full length arch.
Care and cleaning
Clean a lit mirror with the light off so smears show against the dark glass, and use the same damp cloth on a plain mirror.
Dry the glass and the frame in one pass, working from the top down, so water does not run onto a clean edge.
The care routine is clean, warm water and a soft lint-free cloth, wrung out before wiping, then dry the mirror at once with a dry lint-free cloth. Avoid acid or alkali-based cleaners, never use abrasive cleaners, and do not use commercial mirror cleaners that contain ammonia or vinegar. Do not spray cleaner directly onto the mirror: apply it to the cloth, which keeps it off the edges. Check the fixings once a year.
Choosing quickly
- Black tapware: a matte black frame, as a match, or brushed gold as a contrast.
- A narrow vanity: the 460mm pill, the 500mm arch or a 600mm round.
- A wide vanity: the 800mm round or the 900mm wide rectangle.
- Light on the face: a frontlit round, arch or pill.
- A glow on the wall: a backlit round, arch, pill or rectangle.
- Ash timber: the timber arch, rectangle or round.
The final check is the same for every Ingrain mirror: finish against the tapware, light against the room, width against the vanity, height against the eye line and wiring against the wall. For the overview see mirrors, for all lit mirrors LED mirrors, and for the wall browse wall mirrors.

