Liquid soap dispensers and bottle holders
Liquid soap is held on a wall or a bench in one of three fixed ways: a refill dispenser that sits on the bench, a sensor dispenser that works without a touch, or a holder that cradles a pump bottle you already own. The Blue Space has all three, from Meir, Nero and Clark, in brass and stainless steel. This page sets out the sizes, capacity, finish and warranty of each, so you can choose by how the soap is refilled and where it sits.
The three kinds of dispenser
| Kind | How it works | Range |
|---|---|---|
| Refill dispenser | Sits in a bench cutout and refills from the top | Meir Round |
| Sensor dispenser | Touch-free, battery powered, hob or wall mounted | Nero Mecca |
| Bottle holder | Holds your own pump bottle on the wall | Nero Mecca, Clark Round, Meir outdoor bracket |
If the soap comes in a large bottle you refill, a refill dispenser keeps the bottle under the bench and the pump on top. If you want to leave the bottle you bought, a holder is simpler. If you want no contact at all, the sensor dispensers are the choice. The stainless steel dispensers people search for are the holders, because the dispensers themselves are brass.
Meir Round refill dispenser
The Meir Round soap dispenser is a round brass pump that sits on a bench or basin and refills from the top. It holds 500ml of liquid soap through a slimline bottle that fits close to the sink, the bench cutout is 28mm, and the dispenser measures 80mm long and 54mm high and weighs 0.35kg. It is made to sit beside Meir round mixers, in the same finish as the tap.
| Finish | Process |
|---|---|
| Brushed Nickel | PVD |
| Lustre Bronze | PVD |
| Shadow | PVD |
| Champagne | Electroplated |
| Tiger Bronze | Electroplated |
| Matte Black | Not stated |
The Shadow finish has brownish-bronze undertones, so it reads warmer under warm-white light and cooler under cool-white light. The dispenser is for a sink or basin, and it pairs with the Meir Round kitchen and basin mixers. For the finishes in other accessories, see bronze, champagne, brushed nickel and black.
Nero Mecca sensor dispensers
| Piece | Size | Notes |
|---|---|---|
| Hob mounted | 144mm high, spout height 83mm, spout reach 92mm, 45mm round plate | Brass, PVD, 10 years, battery set in the box |
| Wall mounted | 139mm projection, 60mm round plate | Brass, PVD, 10 years, 2L refillable bottle, battery set in the box |
Both Nero dispensers work by sensor, run on a battery set and can take an optional power adapter sold separately. They come in Chrome, Black, Brushed Nickel, Gunmetal, Gold and Bronze. The wall mounted one holds 2L, four times the Meir dispenser, so it suits a busy basin where a small bottle empties quickly. The hob mounted one sits on the surface beside the tap and reaches 92mm to the spout.
Bottle holders
| Holder | Size | Build |
|---|---|---|
| Nero Mecca | 70mm high, 52mm holder length, 68mm projection | 304 stainless steel, PVD, 10 years |
| Clark Round | Suits 500mL pump bottles | Metal, Matte Black |
| Meir outdoor bracket | Takes a 28mm screw top, 68mm projection, 69mm long | 316 stainless steel, lifetime warranty |
The Nero Mecca holder is offered in eight finishes, Chrome, Matte Black, Brushed Bronze, Brushed Gold, Brushed Nickel, Gun Metal, Brass and Matte White. The Clark Round holder works for body wash or hand soap, in a shower, beside a basin or at a kitchen sink. The Meir bracket is made for outdoor use in 316 stainless steel with dual wall screws, so it is the one for an outdoor wall. Measure the screw top of your bottle against the 28mm figure first.
For soap dishes and shelves, see soap dish holders, and for the full soap range, soap dishes and dispensers. The Nero holders are gathered in Nero soap bottle holders.
Choosing by how you refill
| If you want | Choose | Capacity or fit |
|---|---|---|
| A bench dispenser that matches the tap | Meir Round | 500ml, 28mm cutout |
| Hands-free soap | Nero Mecca sensor | 2L on the wall model |
| To keep your own bottle | Nero Mecca or Clark Round holder | 500mL pump bottles on the Clark |
| An outdoor wall | Meir outdoor bracket | 28mm screw top, 316 stainless steel |
Power and plates on the sensor dispensers
Each Nero sensor dispenser is supplied with a battery set, so it works as soon as it is mounted, and an optional power adapter can be bought separately for a direct supply. The plates differ: the hob mounted model has a 45mm round plate and the wall mounted model a 60mm one, 15mm wider. Choose the wall model where there is a clear stretch of wall beside the basin, and the hob model where the surface is the better place. Both are brass, so the finish matches the Mecca tapware in the same colour.
Meir Round pieces to sit beside the dispenser
The Round dispenser belongs to a full accessory range in solid brass, so the rest of a Round bathroom can follow it. The figures below are the spec-line sizes for the pieces you would put on the same wall.
| Meir Round piece | Size |
|---|---|
| Single towel rail, 600mm | 580mm overall, 72mm projection |
| Double towel rail, 600mm | 645mm overall, 115mm projection |
| Guest towel rail | 258mm wide, 80mm projection |
| Robe hook | 45mm wide, 68mm projection |
| Toilet roll holder | 147mm wide, 80mm projection |
The double rail stands 43mm further from the wall than the single, and the toilet roll holder and the guest rail both stand 80mm out. Pick one range for the wall and the dispenser, rail and hook will share a round outline. See Meir bathroom accessories for every Meir range.
Matching the dispenser to the tap
The Meir Round dispenser is made in the finishes of the Meir Round mixers, so the sink tap and the pump can be the same colour. Meir offers the Round range in Polished Chrome, Matte Black, Brushed Nickel, Champagne, Tiger Bronze, Lustre Bronze and Shadow, and the dispenser covers six of those seven, without Polished Chrome. If your tap is Polished Chrome, the Nero Mecca sensor dispensers in Chrome are the nearest match on this page. See Meir Lustre Bronze for one of the Meir finishes in full.
Tiger Bronze is the mid brass finish and is made with anti-fingerprint technology. Shadow is a dark gunmetal with brownish-bronze undertones. Lustre Bronze is a PVD bronze. If the dispenser will sit beside a tap in one of these finishes, put the two side by side in your own light before you decide, because each reads differently under warm and cool bulbs.
Capacity and refilling
| Dispenser | Soap held | Refill |
|---|---|---|
| Meir Round | 500ml | From the top of the pump, slimline bottle |
| Nero Mecca wall mounted | 2L | Refillable bottle |
| Clark Round holder | One 500mL pump bottle | Swap or refill the bottle |
| Nero Mecca holder | One pump bottle | Swap or refill the bottle |
| Meir outdoor bracket | One pump bottle with a 28mm screw top | Swap or refill the bottle |
The wall mounted Nero dispenser holds four times as much as the Meir Round, so it needs a fraction of the refills. The Meir Round is the smaller, neater option for a bench where space is tight. A holder gives you no capacity of its own, so the size of the bottle sets how often you refill.
Base metal and warranty
The dispensers are brass: the Meir Round and both Nero sensor models. Brass takes the PVD or electroplated finish, and the Nero sensors carry a 10 year warranty line. The Nero Mecca holder is 304 stainless steel with a 10 year line, and the Meir outdoor bracket is 316 stainless steel with a lifetime warranty. The Clark Round holder is metal and does not state a warranty line on the spec, so confirm it on the product page. For a coastal or outdoor wall, the 316 bracket is the one built for it.
What comes in the box
| Piece | In the box |
|---|---|
| Meir Round dispenser | The dispenser |
| Nero Mecca hob mounted sensor | One sensor dispenser and one battery set |
| Nero Mecca wall mounted sensor | One sensor dispenser and one battery set |
| Clark Round holder | The holder and a fixing kit |
| Meir outdoor bracket | The holder, a fixing kit and installation instructions |
Check the contents before you start. The sensor dispensers arrive with their batteries, and the holders arrive with the fixings, but you supply the soap bottle for a holder.
Placing a dispenser or holder
Put it where the soap is used and within reach of a wet hand, and leave about 30mm to 50mm above the tallest bottle so it can be lifted out. A wall holder needs 52mm to 69mm of length along the wall and 68mm of clear space in front, and the wall sensor dispenser needs 139mm. A hob dispenser needs a flat surface beside the tap and room for its 92mm reach. Check the fixing points from the piece itself before you drill.
For the brand collections, see Nero, Meir and Clark. For other finishes, see chrome, and the bathroom accessories collection holds every maker.
Fit check before you order
- Choose by refill: bench pump, sensor or your own bottle.
- Check the 28mm cutout or screw top against your bench or bottle.
- Leave room above the tallest bottle.
- Match the finish to your tapware.
- Remember that the sensor dispensers need a battery set or the optional adapter.
Decide how it refills, then where it sits, then the finish.


