Meir Shadow: gunmetal tapware, showers, accessories and handles
Meir Shadow is a dark gunmetal finish, a PVD coating that sits between charcoal and black with a faint cool tone. It is applied across the Meir bathroom and kitchen: basin and kitchen mixers, wall mixers and spouts, rail and rose showers, towel rails and hooks, Oppen cabinet handles, floor drains, a door stop and a heated towel rail. This page sets out what is made in Shadow, with the sizes and ratings that decide fit.
People search for it as Meir Shadow. For Meir tapware in every finish, see Meir taps, for showers see Meir showers, for accessories see Meir bathroom accessories and for handles see Meir Oppen cabinet handles.
The Shadow finish
Shadow is PVD, which means the colour is bonded to the metal in a vacuum chamber. It resists scratches and tarnish better than ordinary plating. It is darker than brushed nickel and softer than matte black, so it suits stone, concrete, timber and plaster, and it works with white basins and pale tiles where a strong, quiet contrast is wanted. Because the finish is the same on every piece, a mixer, a rail and a handle match without checking, which is the main reason to choose Shadow as a set.
What is made in Shadow
| Group | Pieces | Where to see more |
|---|---|---|
| Basin tapware | Round basin mixers, tall and curved versions, Piccola basin mixer, paddle basin mixer, curved wall spouts | Meir taps |
| Kitchen | Round and Paddle gooseneck sink mixers, Piccola and Paddle pull out sink mixers | Meir taps |
| Wall tapware | Wall mixers, pinless and paddle wall mixers, diverter mixers, quarter turn wall tops, wall swivel spout | Meir taps |
| Showers | Rail showers, combination rail, shower roses, hand showers, wall and ceiling arms, glass fixing bracket | Meir showers |
| Accessories | Towel rails, hooks, toilet roll holder, soap dispenser, toilet brush, heated towel rail | Meir bathroom accessories |
| Handles | Oppen edge pulls, round pulls and T-pulls | Meir Oppen cabinet handles |
| Drains and wastes | Square floor grates, shower waste with tile insert, universal pop-up waste | Meir wastes and traps |
Basin mixers and spouts
The Shadow basin mixers use a 35mm ceramic cartridge in brass and are rated WELS 5 star. The Piccola basin mixer is a compact mixer rated 5 star at 5.5 litres a minute and weighs 0.95kg, and the Round mixers come standard, tall and with a curved spout, so there is a height for an inset basin and one for an above counter bowl. The curved wall spouts reach 130mm, rated 5 star at 5 litres a minute, and 200mm, rated 5 star at 5.5 litres a minute and 105mm high.
| Piece | WELS rating | Key sizes |
|---|---|---|
| Piccola basin mixer | 5 star, 5.5 L/min | Compact, 0.95kg |
| Round curved spout 130mm | 5 star, 5 L/min | Reach 130mm |
| Round curved spout 200mm | 5 star, 5.5 L/min | Reach 200mm, 105mm high |
| Round, tall and paddle basin mixers | 5 star | Choose the height from the basin |
| If your basin | Choose | Reason |
|---|---|---|
| Sits in the bench, or is inset or undermount | Standard basin mixer | The spout is low and sits close to the bench |
| Stands on top of the bench | Tall or vessel mixer | The taller body lifts the spout above the bowl wall |
| Is fixed to the wall | Wall basin set or wall spout | The tap comes off the bench |
| Has no tap hole | Wall set, or a bench mixer through a drilled hole | The mixer comes from the wall or through the bench |
Kitchen mixers
The Shadow kitchen mixers are rated WELS 5 star at 6 litres a minute. The Round gooseneck weighs 2.2kg and the Paddle Round gooseneck has the same weight, with a height to the spout that leaves room to fill a tall pot. The Piccola and Paddle pull out mixers weigh 2.9kg and have a hose that reaches the corners of the sink. Check the overall height against the window or the cupboard above the sink before you choose, since the pull out versions are the tallest.
Showers
The Round 3 function rail shower projects 70mm from the wall and the combination shower rail pairs a 200mm rose with a 3 function hand shower, both rated WELS 3 star at 9 litres a minute. The Round shower roses are 200mm, 42mm high, and 300mm, 58mm high, also 3 star at 9 litres a minute. The wall shower arm is 400mm and the ceiling arm is 300mm, and the hand showers come on a swivel bracket. A glass fixing U bracket in Shadow finishes a glass screen.
Setting shower heights
Shower heights are fixed at rough-in, before the tiles go on, so decide them early. A fixed wall head sits 2000mm to 2100mm above the finished floor, measured to the centre of the arm outlet, and a household taller than 190cm should go to 2100mm to 2200mm. The top of a rail is usually 1800mm to 1900mm, and the holder slides down to a comfortable height. A wall mixer sits 1000mm to 1100mm from the floor, centred in the shower space. Leave a margin of 15cm to 20cm above the head of the tallest user, and tell the plumber the heights before the linings are fixed.
Pressure, flow and head size
The supply decides how big a head can be. Round fixed heads usually run from 200mm to 300mm. On a low pressure supply, a smaller head of 150mm to 200mm gives a better spray, and a head larger than 250mm can feel weak unless a pump is fitted. A typical shower flow is 5 to 9 litres a minute, and a flow restrictor in the head keeps the use down. A simple test is to time how long a 10 litre bucket takes to fill. If it fills in under 60 seconds the pressure is good for a large rain head. A tank or gravity supply is usually best with a 3 star head.
Wall mixers
The Round wall mixers are 72mm long, with a pinless version and a paddle version and a short pin lever for a smaller plate. A diverter mixer sends the water to the shower or a bath spout, and the quarter turn wall tops are a pair of handles for a basin or a bath. Wall mixers carry no WELS rating of their own. The body goes in before the tiles, so settle the position and the spout reach while the wall is open.
Accessories and handles
The Shadow accessories are brass in the Round family and stainless steel in the Curvaé family. The Round robe hook projects 68mm and is 45mm wide, the toilet roll holder projects 80mm and is 147mm wide, and the guest towel rail is 258mm wide. The double towel rail comes in 600mm and 900mm, 645mm and 945mm overall, with a 115mm projection, and the single rail comes in 600mm and 900mm. The soap dispenser holds 500ml.
The Oppen cabinet handles are stainless steel with a PVD finish. The edge pulls come in 75mm, 150mm and 300mm lengths, the round pulls come in 200mm, 328mm and 520mm, with a knurled version of each, and there is a T-pull. The 150mm edge pull fixes at 134mm and the 200mm round pull fixes at 160mm, so match the fixing distance to the holes in the door, not the overall length.
Fixing rails and hooks
The fixing distance is the number to measure on the wall, not the overall length. Mark it, level it, then drill, and check the backing behind the wall before you fix. A double rail projects further than a single rail, so leave clear wall beside it. A rail that carries wet towels should be fixed to a stud or to blocking, or with heavy duty anchors in a hollow wall, because plasterboard alone will not hold the load.
Drains, wastes and door stop
The Square floor grate shower drain comes in 50mm, 80mm and 100mm outlets, and there is a shower waste with a tile insert. The universal pop-up waste is 67mm high and suits a basin or a bath. The round door stop is 84mm long and 19mm across. Choose the drain outlet by the pipe, and set the drain level and the fall before the tiles go on.
Caring for the tapware
Wipe the spout and handles with a soft microfibre cloth and warm water, and add a little mild soap if needed. Dry them so water does not set on the surface, which matters most in hard water areas. Keep bleach, harsh cleaners and abrasive pads away from the finish, since they dull plated and coated surfaces. Clean the aerator if the spray turns uneven, and wipe brushed finishes along the grain.
Reading the WELS rating
WELS is the Australian water efficiency label, and more stars means the fitting uses less water. A basin mixer can reach 6 star because a basin needs little water. A kitchen mixer sits at 4 or 5 star because a sink needs a larger flow to fill a pot, and a shower sits at 3 or 4 star because the flow has to be large enough to rinse. Wall mixers and shower taps do not require a rating of their own. Read the rating on the exact piece you are buying, and use a licensed plumber to fit it.
Before you order
Choose the pieces you need and keep Shadow across all of them, because Shadow beside matte black or brushed nickel reads as a near miss. Match the mixer height to the basin and the spout reach to the wall. Settle the shower and wall mixer positions at rough-in, and check the fixing distance on every rail and handle against the wall or the door.