Fienza Empire Slim tapware, showers and accessories
Empire Slim is the Fienza range for a bathroom that wants thin, upright lines. The mixers have slim levers, the plates are small and round or oval, and the shower heads are thin as a coin. It is made in five finishes, so a room can be built from the basin mixer through to the towel rail without a mismatch.
People search for the range as Fienza Empire Slim, Empire Slim, Fienza Empire and Empire Slim tapware. This page covers the mixers, the wall sets, the showers and the accessories, with the sizes and ratings that decide whether each piece fits.
The look and the finishes
Empire Slim is made in chrome, matte black, brushed nickel, brushed copper and Urban Brass. Chrome is the plainest. Matte black is the strongest contrast and hides fingerprints. Brushed nickel is a soft, warm silver. Brushed copper and Urban Brass are the warm pair, and they work against white tiles, timber and green or sand tones. The brushed finishes and Urban Brass are PVD, a coating bonded to the metal in a vacuum chamber, which resists scratches and tarnish better than ordinary plating.
| Finish | Coating | Works with |
|---|---|---|
| Chrome | Electroplated | White tiles and small rooms |
| Matte black | Electroplated | Light walls and timber |
| Brushed nickel | PVD | Stone and grey tiles |
| Brushed copper | PVD | Warm neutrals and terracotta |
| Urban Brass | PVD | White ceramics, green and sand tones |
Choose one finish and use it on every piece. The wider brand is in Fienza taps.
Basin and sink mixers
The basin mixers are single lever mixers with a 25mm ceramic disc cartridge, a swivel spout and a cold start function, which means the lever in the centre position draws cold water only, so the hot water heater does not fire for a quick rinse. The basin mixer is rated WELS 6 star at 4.5 litres a minute, and the tall version is rated 6 star at 3.5 litres a minute.
| Mixer | Overall height | Spout height | Reach | Best for |
|---|---|---|---|---|
| Basin mixer, cold start | 153mm | 114mm | 125mm | An inset or undermount basin |
| Tall basin mixer, cold start | 283mm | 244mm | 180mm | An above-counter basin |
| Sink mixer | 343mm | 256mm | 225mm | A kitchen or laundry sink |
| Pull out sink mixer | 430mm | 254mm | 225mm | A sink where you rinse large pots |
The spout height is the number to check. For an above-counter basin the water must land inside the bowl and not on the rim, so compare 244mm against the height of your basin above the bench. For an inset basin the 114mm spout keeps the mixer neat. The sink mixer is rated WELS 6 star at 4 litres a minute and the pull out version is rated 6 star at 4.5 litres a minute. Both have a swivel spout, so the water can move between a double bowl.
Wall mixers and diverters
The wall mixers are a two part design: an in-wall body that goes behind the tile, and a trim kit that fits on the front. All of them use a 35mm ceramic disc cartridge and work at 150 to 500 kPa. Because the body is separate, the finish and the plate can be chosen late, once the tiles are in.
| Wall mixer | Size | Notes |
|---|---|---|
| Round plate | 121mm high, 65mm round plate, 113mm deep | A tidy, small trim |
| Oval plate | 130mm high, 113mm deep | A longer, slimmer plate |
| Diverter mixer, large oval plate, vertical | 191mm high, 113mm deep | Controls two outlets, such as a shower and a bath spout |
| Diverter mixer, small round plates, vertical | 191mm high, 170mm deep | Two small plates stacked |
| Diverter mixer, small round plates, horizontal | 121mm high, 289mm deep, 132mm long | Two small plates side by side |
A diverter mixer splits the water between two outlets, so it suits a shower with a bath. Choose vertical when the wall is tall and narrow, and horizontal when the wall is wide and low. The depth matters when the wall is shallow, because the in-wall body needs 113mm to 289mm of space behind the tile depending on the model. See wall top assemblies for the wider range of wall controls.
Wall outlets and wall sets
The wall outlets come in 180mm and 220mm lengths, with a round or a square plate. The 180mm outlet reaches 178mm and the 220mm outlet reaches 218mm, and both have a swivel spout. They are rated WELS 6 star, at 3.5 litres a minute for the 180mm and 4 litres a minute for the 220mm. Each comes with a free flow aerator for a bath and a restricted aerator for a basin, so the same spout can serve either.
The wall mixer sets combine a mixer and a spout in one kit, in 160mm and 200mm lengths with round or oval plates. They are rated WELS 6 star at 4 litres a minute. A 160mm set has a 160mm reach, a 120mm distance between the fixing points and is 276mm deep. The 200mm oval set is 200mm long and 123mm high. Choose the 160mm set for a wall hung basin, and the 200mm set for a bath or a wider basin, so the water clears the rim.
Bath filler
The floor mounted basin and bath mixer is 1067mm tall, with a 941mm height to spout, a 214mm reach, a swivel spout and a 152mm round plate. It is rated WELS 3 star at 8.5 litres a minute. It stands beside a freestanding bath, so the floor needs a pipe at the right position, and the reach must land inside the bath. Plan the bath position before the slab or the sub-floor is finished.
Showers
Empire Slim showers come as complete sets and as parts. The overhead heads are thin, with an 8mm head thickness, and the shower rating is on the specification of the exact model.
| Shower | Size | Notes |
|---|---|---|
| Curved shower arm set | 450mm high, 307mm arm, 508.5mm projection, 303mm head | A curved arm lifts a wide, thin head clear of the person. Rated 3 star at 9 litres a minute |
| Curved twin shower | 1242mm high, 390mm arm, 579.5mm projection, 303mm head | Overhead rose plus a hand shower on a slider rail, two sprays |
| Hand shower, round plate | 120mm head, 80mm projection, 60mm plate | Rated 3 star at 9 litres a minute |
The range also includes a gooseneck arm, a straight arm, a ceiling dropper, a rail shower, a deluxe twin shower and a three function handheld head. Choose the ceiling dropper where the head hangs from the ceiling, the gooseneck where you want a high, arched line, and the twin where more than one person uses the shower. Check the projection against the width of the recess, so the water lands inside the screen. All of the showers need a mixer or wall top assemblies for control. See Fienza showers.
Towel rails, holders and hooks
The accessories are stainless steel, in the same five finishes as the tapware. The single and double rails come in 600mm and 800mm lengths. The 600mm rail has a 572mm fixing distance and a 544mm hanging length, and the 800mm rail has a 772mm fixing distance and a 744mm hanging length. The single rail is 65mm deep, and the double rail is 115mm deep, so it needs more clear space beside it.
The range also has a 220mm hand towel rail, a hand towel holder 221mm long and 73mm deep, a toilet roll holder 171mm long, a single robe hook that projects 50mm, a soap holder with a glass dish, a glass shower shelf, and a toilet brush with a glass holder 336mm tall.
The fixing distance is the number to measure on the wall. Mark it before you drill, check the backing and use a level. The accessories are in Fienza bathroom accessories, with towel rails and robe hooks in their own collections.
Heated towel rail
The vertical heated rail is 304 stainless steel with an IP55 rating, 40mm wide, 900mm high and 60mm deep, with one bar and a fixing distance of 800mm. It runs at 12 volts and 25 watts, with concealed wiring that leaves at the top or the bottom, and it is made in brushed nickel and brushed copper. It is a slim rail for a narrow wall beside a door or a vanity. A 12 volt rail needs a transformer, so plan its position and the power before the wall is lined, and have a licensed electrician connect it. More rails are in heated towel rails.
Planning an Empire Slim room
Start with the basin, because it sets the mixer height. Choose a short mixer for an inset basin and a tall mixer for an above-counter bowl. Then choose the wall controls and the shower, and settle the depth of the in-wall body before the tiles go on. Finish with the rails and the holders in the same finish.
The thin lines suit a calm, simple room: plain tiles, flat panels, a thin-rimmed basin and a rectangular mirror. It looks out of place in a room with heavy curves or ornate detail, where a traditional range would sit better.
A slim fitting shows every join, so the finish and the plate shape should agree across the room. If you choose round plates on the wall mixer, use round plates on the diverter as well.
Fitting and care
A plumber should install every mixer and shower, and a licensed electrician should connect any heated rail. Fix rails and hooks to solid backing, and check for pipes and cables before drilling. Wipe the finishes with a soft cloth and warm soapy water, then rinse and dry. Avoid abrasive pads, bleach and harsh cleaners, and wipe brushed finishes along the grain. Clean the aerator if the spray turns uneven. Rub shower nozzles with a finger to clear limescale. In a hard water area, dry the tap after use, because water left on the surface leaves marks.
Before you order
Check the spout height and reach against the basin or sink. Check the rating on the exact product, because the flow differs between a basin mixer, a wall outlet and a shower. Check the depth behind the wall for the in-wall body. Measure the fixing distance of rails against the wall, and settle the power for the heated rail. Choose one finish for the room, and use it across every piece.


