Modern National Round Range

The key factor is the height and style of your basin. For standard inset or semi-recessed basins, a regular deck-mounted basin mixer with a spout height of around 100–140mm works well. However, if you have an above-counter or vessel basin, where the bowl sits on top of the benchtop, you will need a tall basin mixer with a spout height of 180mm or more, otherwise the spout will sit below the basin rim and water will splash onto the benchtop. Wall-mounted mixers offer another option for above-counter basins, with the height controlled by your rough-in position. Always confirm basin rim height before purchasing your tapware.

The Water Efficiency Labelling and Standards (WELS) scheme is a mandatory Australian government rating system that measures how water-efficient a tapware product is. Ratings run from 1 to 6 stars, the more stars, the less water the tap uses per minute. For basin mixers, a 5 or 6-star WELS rating is considered excellent and translates to meaningful long-term savings on water bills, particularly important in drought-prone Australian states. All tapware sold in Australia must carry a WELS rating, and most reputable brands now offer basin mixers rated 4 stars or higher as standard. Look for the WELS label on the product or packaging before you buy.

The finish of your kitchen mixer should complement the other metal elements in your kitchen, cabinet handles, appliances, and rangehood trim. Chrome remains a classic, low-maintenance option that suits almost any kitchen style. Matte black has surged in popularity in contemporary Australian kitchens and pairs particularly well with dark stone benchtops and two-tone cabinetry. Brushed brass and gunmetal finishes suit warmer, more design-forward kitchens. From a practical perspective, brushed and matte finishes tend to conceal water spots and fingerprints better than polished chrome, which can show marks more readily in a busy kitchen environment.

A shower mixer (or shower tap) is the control valve that regulates the flow and temperature of water to your shower. A single-lever mixer controls both temperature and flow with one handle. A thermostatic mixer maintains a pre-set water temperature even if pressure changes elsewhere in the system, a safer and more convenient option, particularly for households with children. Shower mixers in Australia must comply with AS 3718 standards.

While bath mixers and basin mixers may look similar, they are not interchangeable. The key technical difference is the water supply connection size. This difference matters because filling a bathtub requires a significantly higher flow rate, a basin mixer simply cannot deliver water fast enough to fill a bath in a reasonable time. Always use tapware specified for bath applications when fitting out a bath, and consult your plumber if you are unsure.