Skip to content

Shower Heads

5 Items

  • $31 Off RRP
    Clark II Square Overhead Shower - Matte Black

    Clark II Square Overhead Shower - Matte Black

    Checking delivery...
    $183
    $31 (-14%) OFF RRP of $214
    $31 (-14%) off RRP of $214
  • $31 Off RRP
    Clark Round II Overhead Shower - Chrome

    Clark Round II Overhead Shower - Chrome

    Checking delivery...
    $183
    $31 (-14%) OFF RRP of $214
    $31 (-14%) off RRP of $214
  • $86 Off RRP
    Clark Round II Overhead Shower - Matte Black

    Clark Round II Overhead Shower - Matte Black

    Checking delivery...
    $128
    $86 (-40%) OFF RRP of $214
    $86 (-40%) off RRP of $214
  • $50 Off RRP
    Clark Square II Overhead Shower - Chrome

    Clark Square II Overhead Shower - Chrome

    Checking delivery...
    $164
    $50 (-23%) OFF RRP of $214
    $50 (-23%) off RRP of $214
  • $51 Off RRP
    Clark Round II Overhead Shower - Brushed Nickel

    Clark Round II Overhead Shower - Brushed Nickel

    Checking delivery...
    $166
    $51 (-23%) OFF RRP of $217
    $51 (-24%) off RRP of $217

What a shower head means here

Every item in this collection is a shower head on its own: a rose, with no arm and no hose in the box. That is the way most replacement heads are sold, and it is why the first thing to check is what you are screwing it onto. A fixed head goes on a wall or ceiling arm. If you want a head and an arm in one purchase, see shower heads with arm. If you want a handset on a hose, see hand held shower heads.

The heads here come from Nero Tapware, Phoenix, Caroma, Meir, Fienza and Clark, in round and square shapes and sizes from 200 mm to 300 mm. This page covers how to choose one, how to fit it, and why the shower feels different after the swap. For the family of related pages, the full range sits in showers.

Can you just replace a shower head?

Yes, in most homes. It is a simple job that usually takes under 15 minutes for a first-timer and does not need a plumber. You need an adjustable wrench, thread seal tape and a soft cloth to protect the finish. The steps are the same every time.

  1. Turn the water off at the shower valve or the diverter. You do not need to shut off the mains.
  2. Unscrew the old head anticlockwise by hand. If it is stuck or scaled, wrap a cloth around the joint and use the wrench gently.
  3. Clean the arm threads of old tape and scale with a toothbrush or wire brush, and wipe them dry.
  4. Wrap new thread seal tape clockwise around the threads, two to three times, pressing it into the thread.
  5. Screw the new head on clockwise by hand until snug, then give it one gentle turn with the wrench. Do not overtighten.
  6. Turn the water on slowly and check the joint for leaks. If it drips, add another layer of tape and try again.

Call a plumber when a leak will not stop after a proper install, when the arm or pipe is cracked or rusted, when the threads are worn, when very low pressure does not improve, or for any ceiling-mounted rainfall install. Water supply plumbing work beyond replacing a head is licensed work, and the rules on what an owner may do themselves differ by state.

Do all shower heads fit the same?

Mostly. Most Australian shower heads use a standard half inch BSP thread, and the heads here have a female half inch BSP inlet or fit all standard half inch shower arms. That is why a head from one maker usually screws onto an arm from another.

Two checks are still worth making. The first is the arm itself: a damaged or corroded arm should be replaced, and the head should be compatible with the existing arm. The second is weight. Compatibility depends on the head's size, weight and connection type, and a heavy rain head on a long arm puts load on the wall fitting. For the arm range, see shower arms.

Choose the type of head

Heads sort into a few types, and each suits a different shower.

  • A fixed head gives a steady, direct flow and is simple to fit. See shower roses.
  • A rain head is a large plate with a soft, falling spray, and works best in a walk-in shower with overhead clearance. See rain showers.
  • A wall head sits on a wall arm. See wall shower heads.
  • A ceiling head sits overhead and needs planned plumbing. See ceiling showers.
  • A twin set pairs a head with a handset. See twin shower heads.

Rain showers need good pressure to feel effective, and dual showers need plumbing and pressure that can support both outlets. That is the main reason the next section matters.

Size, pressure and the feel of the shower

The heads in this collection are 200, 210, 230, 250 and 300 mm across. A 200 mm head is the all-rounder, with solid coverage at average household pressure, and it fits a 900 x 900 mm shower without much overspray. A 250 mm head is the common renovation choice and feels more enveloping. A 300 mm head gives a full drench but needs good pressure and a wide shower zone, and in a small shower much of the spray misses you. A 200 mm head suits a standard 2.4 m ceiling.

Pressure is a property of your supply, not of the head. A high-pressure style head changes the nozzle design and the spray pattern to feel stronger, but cannot increase mains pressure. The heads here are rated for an operating pressure of 150 to 500 kPa. A simple check at home is the bucket test. A 10 litre bucket that fills in under 60 seconds under the shower points to good pressure, and large overhead rain heads suit supplies above about 200 kPa.

Flow, WELS and water use

Every head here has a flow rating. Most are 3 star at 8.5 or 9 litres per minute, a good number are 4 star at 6.5 to 7.5, and a few are 5 star at 6. On the WELS scale, 3 star is 7.5 to 9 litres per minute and the most common, and 4 star and above is under 7.5. A family of four saves about 20,000 litres a year by moving from a 15 litre head to a 7.5 litre head, and going from 9 to 7.5 litres per minute saves thousands of litres a year.

Brass, stainless steel or plastic

The material decides how the head lasts in a humid room. Stainless steel and solid brass resist corrosion better than ABS plastic. The range includes all three: brass roses, stainless steel roses, 316 marine grade stainless steel for outdoor and coastal use, and ABS heads, such as the Nero 250 mm ABS and Air Shower heads. Brass and stainless steel are the better choice where the head faces hard water and daily wear. For the material view, see stainless steel showers.

Finish: what each one asks of you

Each finish asks for something different, and it is worth knowing before you choose a colour. Chrome is bright and polished and wants a regular wipe to keep fingerprints and water spots off. Matte black is non-reflective and hides fingerprints, and it looks sharpest in a modern or contrasting bathroom. Brushed nickel is satin with low fingerprint visibility, and the tone varies between makers. Brushed brass and gold use a PVD coating for durability, and the gold tone varies by maker. Gunmetal is dark and scratch-resistant, and it looks best dried after use. Brushed or matte finishes generally suit hard water households better than polished ones.

For finish-led browsing, see chrome showers, black showers, brushed nickel showers, brushed brass showers, gunmetal showers and white showers. By maker, see Nero Tapware showers, Phoenix showers, Caroma showers and Fienza showers.

Coloured shower heads

Coloured, colourful and beige are the words people use for finishes, and the collection answers in metal colours. The finishes here are chrome, black, brushed nickel, gold, gunmetal, brass, bronze, champagne, white and stainless steel. For the warmer tones, see gold showers, bronze showers and champagne showers. Gold and brass tones vary by maker, so compare a head with the arm and the tapware side by side before you commit, and match the arm to the head so the two read as one piece.

Single spray or several settings

Most heads in this collection have a single spray. A single-spray head has fewer parts to clean or fail, and the nozzle pattern is set. Settings give you choice but add a mechanism. If you want choices, a handset on a rail or a twin set is the usual way to get them, and the heads on this page are the part that gives the wide, even wash. For that combination, see shower on rails.

Matching the head to the arm you already have

Most buyers swap a head and keep the arm, so match them by finish and by size. Look at the arm's finish first, because a bright chrome arm under a matte black head reads as two different fittings. If the arm is worn or a different finish from the head you want, replace both in one go and buy them from the same range. Then look at the arm's reach. A 250 or 300 mm head needs an arm that carries it 350 to 400 mm out from the wall, so the spray does not run down the tile. A small 200 mm head works on a short arm. If the head is heavy metal, check that the arm is solid brass or stainless steel and fixed into a firm wall fitting.

Cleaning and checks

For routine care, soak a detachable head monthly in warm water with a few drops of mild dishwashing liquid for 30 to 60 minutes, then use a soft brush and rinse. For a fixed head, tie a bag of the solution around it. Every couple of weeks, clear the nozzles gently with a toothpick and run the water on high for 30 seconds. Every few months, check the arm connection and tighten the nuts snugly.

Two cautions apply. Vinegar is not right for every finish, because acidic products do not suit every coating, and PVD and special finishes call for warm soapy water. And avoid abrasive cloths and harsh chemicals on any finish.

Heights and clearance

Set the outlet of a fixed wall head at 2000 to 2100 mm above the finished floor, and 2100 to 2200 mm for a tall household. A rain head on a ceiling arm sits at 2100 to 2200 mm depending on the ceiling, and you should leave at least 20 cm between a rain head and the user's head. Wall arms project 300 to 400 mm. Confirm the heights at rough-in if you are building new, before tiling.

Frequently Asked Questions

What's the best shower head in Australia?

There's no single best model, the right choice depends on mounting type, water pressure and household needs. A fixed wall head suits a simple, permanent install. A rail-mounted head suits households with different heights or young kids. A hand shower adds flexibility for rinsing and cleaning. Whatever the mounting type, look for a WELS star rating and, if your home has lower mains pressure, a head built with air-injection technology to maintain spray feel. Compare by mounting type: wall shower heads, hand-held shower heads or rail showers.

Do all shower heads fit the same fitting in Australia?

Most do. The vast majority of shower heads and arms sold in Australia use a standard 1/2 inch BSP thread, so a new head will generally screw straight onto an existing arm or hose without extra adapters. It's still worth confirming the thread size before buying, particularly with older fittings or imported products, since a small number use a different standard.

What type of shower head is best for strong water pressure?

Perceived pressure comes down to nozzle design as much as your home's actual mains pressure. A head built with air-injection technology maintains a fuller, more forceful-feeling spray even at a water-efficient flow rate, which is generally a more reliable fix for a weak-feeling shower than simply buying a bigger head. If your home genuinely has low mains pressure, look for a head specifically designed for low-pressure systems.

What's the difference between a fixed shower head, a rain shower and a hand shower?

A fixed shower head is mounted on a wall arm at a set height and angle. A rain shower is a specific style of fixed head, larger and flatter, usually ceiling or high-wall mounted, designed for a wide, gentle overhead spray. A hand shower is on a flexible hose and can be held or clipped into a wall bracket or rail. Many bathrooms combine two of these, most often a fixed or rain head with a hand shower on a rail. See rain showers or double shower heads for those combinations specifically.

Does a new shower head need a plumber to install?

A straight like-for-like head swap onto an existing arm is often manageable without a plumber, since it's usually just a screw-fit thread connection. Anything beyond that, changing the arm position, adding a diverter to run two shower functions, or any work that disturbs the wall's waterproofing, should go through a licensed plumber to keep the installation compliant and the product warranty valid.

What size shower head should I choose?

Sizes range from compact heads around 80mm across up to wide plate-style heads of 200mm or more. A 100 to 150mm head suits a standard shower recess with solid coverage and reasonable water use, while anything over 200mm moves toward a rain-style, full-body spray. Whatever the size, check the WELS rating so you know the flow rate before comparing models.