Skip to content

Steel Baths

1 Item

  • $246 Off RRP
    Caroma Stirling Steel Bath

    Caroma Stirling Steel Bath

    Checking delivery...
    $748
    $246 (-24%) OFF RRP of $994
    $246 (-25%) off RRP of $994

Steel bath buying guide


A steel bath is a pressed steel shell with a glass-hard enamel coating, and this page holds one: the Caroma Stirling steel bath, a tile flange bath for built-in installation. Steel bath, steel bathtub, metal bath, metal bathtub and enamel bath describe the same search. With one bath to describe, most of what there is to know comes from how the material behaves. The sections below cover what a steel bath is made of, how the enamel wears and how it holds heat. They also cover how heavy it is, what shapes the material allows, and how the Stirling is installed.

What a steel bath is made of

A steel bath is formed from sheet steel and coated with enamel, a glass-based finish fused to the metal. The Caroma Stirling has a strong, durable steel shell that does not flex or bend, combined with a hygienic, scratch and stain resistant porcelain enamel finish. The enamel is smooth, non-porous and does not absorb dirt, which makes cleaning easier. Follow the care sheet for the bath you buy, because it decides which cleaners are safe.

Steel thickness varies by maker and is not published for the Stirling. If thickness matters, ask for the specification sheet, which comes with the bath.

The Caroma Stirling

The Stirling is 1525mm long, 770mm wide and 330mm deep. It has a generous base and plenty of width, and a classic steel design with a four tile flange for built-in installation. The plug and waste are not included, and Pop-Down wastes are the better choice for safety, service and maintenance. A specification sheet is available for download. The Stirling sits inside the standard size range, about 1500mm to 1700mm long and 700mm to 800mm wide, and the 1500mm baths page lists that length across materials.

Are steel baths any good

Steel is strong in the surface and the build. Enamel is harder than glass, steel enamel is very durable and difficult to chip, and its durability rates very high against moderate for acrylic. The pressed construction gives a very rigid structure. Weight and shape are covered below.

Steel against acrylic

People ask whether steel is better than acrylic. It is a trade. Acrylic is lighter, warmer to the touch and easier to mould into shapes, including the fluted and rounded bodies on other pages here. Steel is harder wearing and heavier. Chips in a steel bath are harder to mend than nicks in acrylic, which can be polished out. Steel enamel and acrylic rate the same on heat retention, good, and steel enamel is medium in weight while acrylic is the lightest of the common materials. The acrylic bathtubs page covers the other side of the choice.

Heat and the feel of the bath

Steel feels cold when empty and warms quickly once the water is in. Steel enamel quickly assumes the temperature of the water. It is colder to the touch than acrylic at first but keeps the bath warm for longer, and heat retention rates good for both materials. How fast the water cools depends on the room, the bath's construction, the water temperature and how long the bath is occupied, so steel does not mean the water will suddenly turn cold.

Weight and the floor

Weight is the main drawback. Steel is heavy compared with acrylic and significantly heavier than the same bath in acrylic, though it is medium in weight, between acrylic and stone. Allow for the bath's substantial weight and dimensions, confirm the support structure and plumbing are ready, and use professional installation. Typical steel baths run about 30kg to 45kg, against about 15kg to 25kg for acrylic. Moving a steel bath up a narrow dog-leg staircase or tight landing is a two person job. Confirm the Stirling's weight with us before ordering.

The floor needs planning. A bath's weight must be properly supported during and after installation and the floor checked. Acrylic is lighter, which matters on upper floors, and heavier materials may need floor reinforcement above ground level. Timber floors usually need reinforcement for heavy baths, and a structural engineer should assess a timber floor where the combined load is high. Ask the builder before ordering.

Steel against cast iron

Cast iron is not sold on this page, but people searching for a metal bath often have it in mind. Steel is much lighter than cast iron but heavier than acrylic. Cast iron baths are extremely durable and heavy, and less suitable for apartments and upstairs bathrooms, and steel enamel, cast iron and stone all hold heat well. For a metal bath that a floor can carry more easily, steel sits between acrylic and cast iron on weight.

Lifespan and load

Steel has a long and consistent structural lifespan provided the enamel stays intact, while acrylic varies with the quality of its reinforcement, the thickness of its sheet and the accuracy of installation. Steel suits busy family bathrooms, especially where the bath doubles as the main shower area, which fits a tile flange bath tiled in against a wall.

Shapes

Pressed steel favours simple forms. The manufacturing process suits standard rectangular or shallow curved designs, and acrylic offers more shape variety. The Stirling is a rectangular tile flange bath, and pressed metal baths are mostly rectangular and drop-in, in lengths from 1200mm to 1700mm and 700mm wide. If you want an oval, a fluted face or a round body, freestanding baths and stone baths cover the shapes steel does not make.

Tile flange installation

The Stirling is a tile flange bath. The flange design suits a traditional bathroom layout and allows the bath to be positioned right up against a wall and tiled over the flange to create a water and dust tight seal. With no gaps behind the bath there is nowhere for dust to collect. All baths need waterproofing at the base and along any walls they touch, and built-in baths also need tiling or a hob. Built-in baths give more flexibility over plumbing positions than freestanding ones, and the bath waste should stay accessible for future repairs. The built in baths page holds inset and tile flange baths of every kind, and baths for tile edge collects those made to be tiled to the rim.

Waste and plug

The Stirling is sold without a plug and waste, so the waste is a separate choice. Pop-Down wastes are the better choice, and the bath wastes page holds them. Australian building codes require fully removable bath wastes in some situations, so consult a plumber before purchase. Decide the waste before the tiling.

Care and cleaning

Care is simple. Clean steel baths with gentle non-abrasive cleaners to avoid scratches and protect the finish. The enamel is non-porous, so water and soap have little to grip. Steel tolerates a wide range of non-abrasive household cleaners, and acrylic needs milder ones, which is another reason to read the Caroma care instructions before choosing a cleaner. The enamel is hygienic, scratch and stain resistant, and the Caroma specification sheet is the document to read for anything more.

Rigidity and a shower over the bath

Steel baths are very rigid. When correctly supported, levelled and installed, there is little movement, so a shower over the bath will not flex or creak underfoot. The rigid rim gives a stable surface for the seal between the bath and the wall, and the rigid sides give a secure fixing point for a bath screen. That is the case for steel in a family bathroom where the bath doubles as the main shower. Baths are usually supported by a dedicated steel cradle or heavy-duty adjustable legs that spread the load. Steel needs precise levelling and support and gives little room for adjustment after placement, and a heavier bath may need extra people to place it.

Size, depth and a shower over the bath

The Stirling is 770mm wide, which is inside the 700mm to 800mm standard width, and 1525mm long. A bath with a shower over it should be at least 1500mm long and at least 700mm wide, and standard depth is about 400mm to 500mm. The Stirling's depth is 330mm, so check the depth against your use. A bath that will take a shower and a standing adult needs a screen or curtain, and a fixed or folding glass screen works better than a curtain in a small room. The shower baths page holds the baths made for that.

Where steel is used

Searches for a stainless steel outdoor bath or a metal bathtub for outdoors are about a different product, and the outdoor baths page covers them. The Stirling is a bathroom bath, tiled in against a wall.

Can you still buy metal baths

Yes. This page lists one, and pressed metal baths are sold in rectangular and drop-in forms, mostly 700mm wide and from about 1200mm to 1700mm long, with an optional tile bead strip so the bath can sit against a tiled wall. Steel is still made and sold, and the Stirling comes from Caroma baths.

What to check on the specification sheet

The Caroma specification sheet carries what the page does not. Look for the thickness of the steel and the weight of the empty bath. Look for the type of enamel and how it is applied, and for how the bath is supported on site, whether on a cradle or adjustable legs. Check also the position of the waste and how the flange is meant to be sealed and tiled, and the cleaners and chip repair advice. Ask us if the sheet leaves a question open.

Choosing a steel bath

Choose steel if you want a hard surface and a built-in bath and the weight suits the floor. Choose acrylic if you want a lighter bath, more shapes or a freestanding design. Measure the wall and the doorway, confirm the floor, decide the waste before the tiler starts, and read the specification sheet for the thickness and the care instructions. If the room is short, small baths lists the compact options.

For the full range across materials, shapes and installation types, return to bathtubs.

Frequently Asked Questions

Are steel bathtubs any good?

Yes, for most households a steel bath is a solid, low-maintenance choice. It's made from pressed steel with a fused enamel (vitreous enamel) coating, which gives a hard, glossy, scratch-resistant surface that's easy to clean. Steel baths are also considerably lighter than stone or cast iron equivalents, which simplifies both delivery and installation. The trade-off is that steel transmits sound and temperature more readily, so the water can cool a little faster and the surface can feel cooler underfoot than stone.

Are steel baths better than acrylic?

Neither is universally better, they suit different priorities. Steel has a harder, more scratch-resistant surface and a more solid, weighty feel than acrylic, but acrylic retains heat better and feels warmer to the touch. Acrylic is usually lighter again than steel and more forgiving if something is dropped on it, since it won't chip the way an enamel coating can. If heat retention during a long soak matters most, acrylic or stone will outperform steel; if surface durability and a crisp, glossy finish matter most, steel is a strong option.

Should a steel bath be earthed?

This is a genuine electrical safety question and the answer depends on your bathroom's specific wiring and any metal fixtures connected to the bath, so it needs to be assessed on site. Always have a licensed electrician check earthing (equipotential bonding) requirements as part of the installation, rather than assuming based on a previous bath or another property.

What are the benefits of a steel bath?

The main benefits are weight, durability and cost. Steel baths are lighter than stone or cast iron, which matters if your floor structure is a consideration, since a full bath plus a bather can still exceed 200kg regardless of the tub's own weight. The enamel surface resists scratching and staining well over time, and steel baths generally sit at a more accessible price point than engineered stone or cast iron for a comparable size. They're a practical, durable option rather than a luxury pick, which suits most family bathrooms.

Do steel baths feel less solid than stone baths?

Some people notice a slightly hollower sound or feel when stepping in or moving around, since steel is thinner and transmits sound more than a dense stone shell. It doesn't affect structural safety, the bath is still rigidly supported once installed, it's more a sensory difference. If a heavier, more insulated, quieter feel underfoot is the priority, it's worth comparing against stone baths directly.

How is a steel bath installed?

Steel baths are generally installed the same way as other built-in or freestanding baths of the same shape, supported on adjustable feet or a cradle with the waste and overflow connected before final fixing. Waterproofing around the bath area still needs to meet AS 3740, and tap and waste connections should always be carried out by a licensed plumber, regardless of the bath material.