300mm Door Pull Handles

300mm door pull handles are a mid-length bar handle suited to entrance doors, internal doors, and sliding panels where a standard lever would look undersized. This page covers handle types, finish options, installation considerations, and how to confirm the right length for your door before ordering.

What types of door pull handles come in 300mm?

The most common 300mm pull handle types are D-pull handles, straight bar pulls, and offset pulls. D-pulls sit proud of the door face and offer a comfortable grip for heavy entrance doors. Straight bar handles mount flush on both ends and suit a cleaner, more rectilinear look. Offset handles angle the bar away from the fixing points, which makes them easier to grip on thick-profiled doors. Flush pull handles and lip pull handles are also available at 300mm but are more typically found on cabinet joinery and sliding doors rather than hinged entry doors.

What finish options are available for 300mm door pull handles?

Common finishes include matte black, brushed nickel, brushed brass, satin chrome, and white. Matte black and brushed nickel account for most of the volume in Australian residential projects, reflecting the broader trend in tapware and interior door handles. Brushed brass and unlacquered brass suit warmer material palettes. White is less common at 300mm but is available from select suppliers for painted-door applications. Most handles in this size are zinc alloy or stainless steel with a PVD or powder-coat finish, which affects long-term durability, particularly in humid or coastal environments.

Is 300mm the right length for an entrance or internal door?

For a standard 820mm to 1000mm wide hinged door, 300mm is a common pull handle length. It provides enough grip surface without visually dominating a single door panel. A 150mm to 200mm pull can look too short on a full-height door, while 600mm to 1200mm pulls are typically reserved for oversized pivot doors or double-leaf configurations. For sliding doors, 300mm flush pull handles or edge pulls often replace the traditional D-pull, so confirm the door type before selecting a profile. If you are also specifying cabinet handles in the same space, matching the finish across both categories creates a consistent result.

What materials are 300mm door pull handles made from?

Zinc alloy, stainless steel (304 or 316 grade), and aluminium are the three main substrate materials. Stainless steel grade 316 is the appropriate choice for coastal areas or external-facing doors due to its higher resistance to salt and humidity. Zinc alloy handles are more affordable and perform well indoors, but can show wear at the finish layer earlier than steel in high-use applications. Aluminium is lightweight and corrosion-resistant, making it common in commercial and sliding-door applications. Always check the supplier's substrate specification, not just the finish name, when comparing handles across price points.

How do you install a 300mm door pull handle?

Most 300mm bar pulls mount via two fixing points with a centre-to-centre (CTC) distance of roughly 200mm to 224mm, though this varies by model. Fixings are typically M5 or M6 machine screws threaded through the door from the back face. Confirm the door thickness is within the handle's specified range before purchasing, as handles designed for 40mm to 45mm doors will not grip correctly on a 35mm slab door. For back-to-back installation on a double-sided door, confirm the handle set includes paired fixings and matching rose plates on both faces.

What are lip pull and finger pull handles, and do they come in 300mm?

Lip pull handles and finger pull handles are low-profile pulls designed primarily for cabinet doors and drawers, not hinged entry doors. A lip pull has a small curved flange at the base that allows a finger to hook under the door face, while a finger pull is a recessed or minimal-projection channel. Both are available in lengths around 300mm for kitchen cabinetry and walk-in robe joinery. If you are specifying these for cabinetry, they are catalogued separately under cabinet handles rather than door pull handles.

Which brands stock 300mm door pull handles in Australia?

Momo Handles, Zanda, and Häfele are among the well-known suppliers of architectural pull handles in Australia. Momo Handles in particular carries a broad range of bar pulls and D-pulls in multiple lengths and finishes, with 300mm available across several ranges. When comparing brands, check the fixing centre-to-centre distance, the warranty period for the finish, and whether back-to-back sets are sold as a unit or require separate ordering. The Blue Space stocks a curated selection of 300mm pull handles that have been reviewed for residential and light-commercial applications. For other door and window hardware, see the full interior door handles range.