ADP basins buying guide
ADP basins cover every common mounting type, in ceramic, solid surface, concrete and stone composite, in round, oval, rectangular, square and arch shapes. Most are above counter and under counter basins, with inset, semi-inset, semi-recessed and wall hung options. Two points matter before you order: most ADP basins have no tap hole, and the plug and waste is usually sold separately. This guide covers the types, the sizes, the tap, overflow and waste lines, and how to match a basin to a vanity.
Where ADP basins are made
Origin differs by range. ADP's vanities, mirrored cabinets and laundry products are Australian made, and some basin ranges are designed elsewhere: the Teorema is an Italian quality ceramic basin designed by Scarabeo. Ask us for the origin of a specific model if it matters to you. For ADP vanities, see ADP vanities and furniture.
ADP basin types
Above counter basins are the largest group. They sit on the bench and take a tall mixer or a wall mixer, and each has its own height above the bench. Under counter basins fit beneath a solid benchtop and mostly have an overflow. Inset and semi-inset basins sit in the bench with the rim showing. Semi-recessed basins overhang a slimmer vanity, and wall hung basins fix to the wall. Whichever type you pick, check the tap reach and the waste against each basin's specification.
Tap holes
Nearly every ADP basin here has no tap hole, so the mixer mounts on the bench or the wall, and the position is set by the bench, not the basin. The exceptions are the wall and semi-recessed basins: the ADP Halo wall basin has one tap hole, the ADP Eon has a right-hand tap hole only, and the ADP Miya semi-recessed basin has one tap hole for a mixer. Read the tap hole line, then choose basin mixers or bathroom basin taps to suit. A tall or wall mixer clears the raised rim of an above counter basin.
Overflow, plug and waste
The overflow line decides which waste you need. The ADP under counter basins, such as the Miranda, Charlotte, Oval, Round, Link, Dish and Nesa, have an overflow, and the Miranda and Charlotte have a slot overflow at the back with a centred waste. The above counter basins are non-overflow only, and the ADP Glory solid surface under counter basin is non-overflow only and needs a universal plug and waste. The ADP Eon requires a 32mm waste with overflow, and its wall fixings are not included.
ADP basins are sold with the plug and waste separate. Add one that matches the basin or the tapware, and consider a black waste for the black basins. The Teorema is sold with the tapware, the bottle trap and the plug and waste separate. A pop-up waste or a plain plug is a separate decision, so check the waste diameter against the basin. A ceramic basin's waste is tightened by hand only, with a foam washer under the waste neck sealed with neutral cure silicone. See basin wastes.
Basin sizes
The smallest ADP basins are the Maggie at 300mm by 300mm with a 4 litre bowl and the Pluto at 325mm across with a 5.5 litre bowl. The Jennifer and the Love are 360mm round basins that are 130mm high and hold 7.5 litres, and the Monroe is a 400mm round with an 8.5 litre bowl. The Hewitt and the Stadium are 460mm by 330mm, the Ollie is 500mm by 340mm with a 10 litre bowl and the Norma concrete basin is 550mm by 350mm with a 10.5 litre bowl. Among under counter basins, the Miranda is 550mm by 380mm and holds 7.8 litres to the overflow, the Charlotte is 425mm square and the Glory solid surface basin is 545mm by 355mm with an 8 litre bowl. The semi-inset Faith is 495mm by 255mm, holds 4 litres and sits 45mm above the benchtop, and the Dignity is a 495mm by 365mm oval. The wall hung Halo is 450mm wide with a 160mm projection, and the Teorema runs from 600mm to 1400mm. For compact sizes, see small hand basins and small basins.
Materials and finishes
Most ADP basins here are ceramic. The Glory, Hope, Faith, Halo and several semi-inset basins are solid surface, the Jean and Norma are concrete, and the Ollie, Arlo and Monroe in colours such as Royal Beige are stone composite. Clean with a soft cloth and mild soapy water, avoid abrasive pads and harsh chemicals, and note that matte and coloured finishes may show marks more easily. Wipe ceramic with a soft cloth and a weak non-abrasive detergent, and clean solid surface with a soft damp cloth and mild detergent. See concrete basins, solid surface basins and stone basins. The shapes include round, oval, rectangular and fluted basins, and the finishes include matte white and black.
The Glory and Hope: one basin, two cut-outs
The ADP Glory and Hope solid surface basins sit on this page as under counter basins, and they can be fitted two ways. The Glory is nominally 550mm by 360mm and 119mm high, holds 8 litres to the rim, and comes in matte white and gloss white. The cut-out is 510mm by 344mm as a rounded rectangle for an inset fit, and 470mm by 304mm as a rounded rectangle for an under counter fit, both centred, with a 44mm waste centred. The Hope is nominally 495mm by 255mm and 120mm high, holds 4 litres to the rim, with cut-outs of 485mm by 243mm for inset and 424mm by 206mm for under counter. A cut-out file in DXF format is available on request, which a stone fabricator can use.
The difference between the two cut-outs is about 40mm in each direction, which is the rim that rests on the bench when the basin is inset. That makes the fitting a decision to settle with the fabricator before the stone is cut: an inset fit leaves the rim on show, and an under counter fit hides it and needs a stone or solid surface bench. See undermount basins and inset basins for what each asks of the bench.
The Eon wall basin: a compact basin with conditions
The ADP Eon is a small solid surface wall basin with more conditions than most. It is nominally 455mm by 150mm and 120mm high, with a capacity of 1 litre to the overflow, and it weighs 4.5kg. The basin can be wall mounted but the fixings are not included, the mounting holes are not pre-drilled, and to wall mount it you drill through the thick sections from the back of the basin. It can only be mounted with the tap hole on the right.
The Eon requires a 32mm waste with an overflow, an overflow kit is included, and care should be taken when purchasing plumbing or bottle traps. That last point matters for a wall basin whose trap is on show, since a bottle trap has to match the overflow waste. A 1 litre basin is a small hand basin. See small hand basins and wall hung basins.
The Teorema wall basins in numbers
The Teorema range on this page is the Scarabeo Teorema 2.0 design, an Italian quality ceramic basin. The sizes come with weights. The 600mm offset basin is nominally 600mm by 440mm and 140mm high, holds 2.5 litres to the overflow and weighs 16.6kg. The 1000mm full bowl is 1000mm by 460mm and 140mm high, holds 7 litres to the overflow and weighs 24kg. The 1400mm double bowl is nominally 1415mm by 460mm and 140mm high, holds 4 litres to the overflow and weighs 36.5kg. The tap hole is none or one, with three tap holes drillable on request, and the basins suit a 32mm waste with the universal plug and waste sold separately.
The weights change what the wall has to do. A 36.5kg basin on two or three brackets, plus water, needs a wall built for it, and brackets should be rated to at least twice the basin weight, which would put the 1400mm basin's brackets at about 73kg. No rated load is published for the fixing kit, so ask the installer to confirm the brackets. A fixing kit is included, and the basin has fixing slots. Use noggins or an in-wall frame, and see wall hung basins for the wall preparation.
Semi-inset basins and the height above the bench
The ADP semi-inset basins sit partly above the bench, and the height above the bench differs by model. The Chandler is a 398mm square, 120mm high basin standing 40mm above the benchtop and holding 9 litres. The Monica is a 355mm square, 115mm high basin standing 50mm above the bench and holding 6.5 litres. The Respect is a 395mm round basin holding 6 litres, the Zeya stands 50mm above the bench and the Faith 45mm. A semi-inset basin shows 40 to 50mm of its height above the bench, against 100 to 155mm for an above counter basin, so the rim sits lower and the cut-out has to be made to the template. See semi-recessed basins for the type that overhangs the front of the cabinet.
The ADP concrete basins
The ADP Jean is a 400mm round concrete basin, 110mm high with an inner depth of 98mm, holding 8.5 litres. The Norma is a 550mm by 350mm concrete basin with the same height and depth, holding 10.5 litres. Both come in colours such as Butter, with no tap hole and no overflow, and the plug and waste is sold separately. The care for a concrete basin differs from ceramic, with a sealer to keep intact and no scouring pads or strong chemicals, and the concrete basins page sets out the routine.
How to choose
- Choose the mounting type from the bench or the wall.
- Check the length, width, height and bowl size against the vanity.
- Read the tap hole line and plan a bench or wall mixer.
- Read the overflow line and choose a matching waste, and add the plug and waste to the order.
- Choose the material and finish with the tapware.
The bathroom basins page sets ADP beside the other makers, and bathroom vanities covers the cabinets that carry the bench.


