Meir Champagne tapware, showers and accessories
Champagne is the Meir finish for a bathroom or kitchen that wants a pale, warm metal. It sits between brass and rose gold: lighter and softer than brass, less pink than rose gold, and calmer than polished gold. The same colour runs through the tapware, the showers, the accessories, the wastes, the shower door hardware and the cabinet handles, so a whole room can be matched in one finish.
People search for it as Meir Champagne, champagne tapware, champagne gold tapware and champagne bronze tapware. This page explains the colour, what is made in it, and the sizes and ratings that decide whether each piece fits.
The colour and how to use it
Champagne reads as a soft gold with a hint of silver, so it does not shout. It suits warm white walls, pale timber, travertine, sand and cream tiles and soft green or blush paint. Against black fittings it turns warm and rich, and against cool grey tiles it turns slightly yellow, so test it in the room before you commit.
The tapware and showers are electroplated brass, and the accessories and flush plate are PVD, a coating bonded to the metal in a vacuum chamber. Because the two are made differently, hold the pieces next to each other in daylight before you order, and expect a very slight difference in tone between plated and PVD pieces.
| If you want | Choose |
|---|---|
| A pale, soft gold | Champagne |
| A deeper, brown-gold | Meir Tiger Bronze |
| A cool, bright silver | Meir polished chrome |
Once you pick a finish, keep to it. The whole range is built so that no second metal is needed in the room.
Basin mixers
The champagne basin mixers come in the Paddle, Pinless and Piccola designs. All of them use a 35mm ceramic disc cartridge in brass. The sizes below decide which basin each one suits.
| Mixer | Overall height | Height to spout | Reach | Rating |
|---|---|---|---|---|
| Paddle round basin mixer | 215mm | 80mm | 99.8mm | WELS 5 star, 6 litres a minute |
| Pinless round basin mixer | 215mm | 80mm | 99.8mm | WELS 5 star, 6 litres a minute |
| Paddle round tall basin mixer | 380.5mm | 226mm | 146mm | WELS 5 star, 6 litres a minute |
| Piccola basin mixer | 153mm | 65mm | 105mm | WELS 5 star, 5.5 litres a minute |
| Piccola tall basin mixer | Taller body | Lifted spout | 105mm | WELS 5 star, 5 litres a minute |
The spout height is the number to check. For an above-counter basin the water must land inside the bowl and not on the rim, so compare the 226mm spout height of the tall mixer against the height of your basin above the bench. For an inset basin the 80mm or 65mm height keeps the line low and neat. The Piccola is the smallest of the three, so it suits a narrow vanity, a powder room or a small basin. See Meir Paddle tapware and Meir Pinless tapware.
Wall mixers, taps and spouts
Wall mounted tapware keeps the bench clear. The Paddle round wall mixer is a two part design: an in-wall body that goes behind the tile and a trim kit that fits on the front. The handle is 42mm across and 95mm high, the backplate is 80mm across, and the mixer is 112mm deep. A version with a diverter controls two outlets, such as a shower and a bath spout. The champagne circular wall taps use a pair of quarter turn ceramic disc cartridges and pair with a champagne spout or shower rail.
Because the body goes into the wall before the tiles, the wall depth and the plate position need to be settled before the lining goes up. Spouts are in Meir spouts, and the whole tapware group is in Meir taps.
Bath fittings
The Paddle round freestanding bath spout with a hand shower is 1055mm tall, with a 910mm height to spout and a 225mm reach, on a 35mm ceramic disc. It is rated WELS 3 star at 9 litres a minute, and it is 6.4kg, so the floor fixing must be solid. The round freestanding bath mixer with a hand spray has a spout that swivels 360 degrees and a detachable hand wand, with the same rating. A freestanding bath mixer stands on the floor beside the bath, so the pipe must come up at the right place before the slab or floor is finished, and the reach must land inside the bath.
Kitchen taps
The champagne kitchen taps suit a kitchen that wants warm metal against white or timber joinery. The Paddle round gooseneck sink mixer is 442mm tall, with a 237mm height to spout, a 244mm reach and a 360 degree swivel, rated WELS 5 star at 6 litres a minute. The Paddle round pull out sink mixer is also 442mm tall, with a 273mm height to spout and a 225mm reach. The kitchen hob spout with a pull out nozzle is 373.1mm tall, with a 196.9mm height to spout and a 227.2mm reach, rated WELS 5 star at 6 litres a minute.
The kitchen pot filler is 105mm high with a 475mm reach. It is fixed to the wall above the cooktop and fills a large pot without a trip from the sink. It needs a cold water supply in the wall, so plan the position before the wall is lined. See Meir kitchen taps.
Showers
The champagne showers have a round, thin head on a curved wall arm.
| Shower | Size | Rating |
|---|---|---|
| Gooseneck shower set, 200mm rose | Single or three function hand shower | Both heads 3 star at 9 litres a minute |
| Gooseneck shower set, 300mm rose | 352mm arm reach, 502mm projection, 10mm head thickness | Both heads 3 star at 9 litres a minute |
| High rise shower arm | 366mm tall, 380mm reach, DZR brass | Works at 150 to 500 kPa |
| Round combination shower rail, 200mm rose | Universal inlet, top or bottom connection | Rain rose with a hand shower |
A twin shower suits a family, because the hand shower can reach a child or the shower floor. The universal inlet on the combination rail means it can be installed with a top or a bottom water connection, so it suits both an existing wall and a new one. Check the projection against the width of the recess, so the water lands inside the screen. See Meir showers.
Towel rails, hooks and holders
The champagne accessories are made in the Curvaé design in 304 stainless steel with a PVD finish, and every piece has a dual wall fixing.
| Piece | Length | Depth | Fixing distance |
|---|---|---|---|
| Single towel rail 600mm | 628mm | 64mm | 600mm |
| Double towel rail 600mm | 628mm | 114mm | 600mm |
| Double towel rail 800mm | 828mm | 114mm | 800mm |
| Guest towel rail 300mm | 328mm | 64mm | 300mm |
| Shower shelf | 400mm | 115mm | 300mm |
| Toilet roll holder | 170mm | 64mm | Hanging length 125mm |
The single robe hook is 55mm high and 49mm deep, and the double robe hook is 100mm long and 53mm deep. A double rail projects 114mm, so it needs clear space beside it. The fixing distance is the number to measure on the wall: mark it before you drill, check the backing, and use a level. See Meir towel rails, Meir robe hooks, Meir toilet roll holders and Meir bathroom accessories.
Heated towel rail
The heated vertical rail is 304 stainless steel, 25mm wide, 1000mm high and 70mm deep, and it has an IPX4 rating, which is safe for use in a bathroom. It draws 23 watts at 220 to 240 volts, has a 2.5m lead and needs no transformer, and the surface runs at 40 to 45 degrees Celsius. It is sold per single rail with a towel hook accessory. A licensed electrician should connect it, and the power position should be settled before the wall is lined.
Wastes, drains and shower door hardware
A champagne tap looks wrong over a chrome waste, so the range includes the parts that show. The round bottle trap fits a 32mm basin waste and adjusts from 160mm to 385mm in length, with a 70mm round plate. The universal pop up waste suits a basin or a bath. The shower waste and the 900mm shower channel waste come with a tile insert, and the square floor grates fit 80mm and 100mm outlets.
The shower door hardware includes a glass to glass hinge (115mm by 90mm, 55mm plate each side, about 7.6mm between panels), a glass to wall hinge (64mm by 90mm by 50mm), a glass fixing U bracket and a round door handle. A round door stop completes the set. See Meir wastes and traps.
Cabinet handles
The Oppen cabinet handles come in champagne in stainless steel, for a cabinet 13 to 18mm thick. The edge pull is made in 75mm, 150mm and 300mm lengths, 16mm wide and projecting 35mm, with fixing distances of 59mm, 134mm and 284mm. The round pull comes in 200mm, 328mm and 520mm lengths with fixing distances of 160mm, 288mm and 480mm, and it is 12mm wide and projects 30mm. The round pull is also made with a knurled grip. The knob is 30mm across and projects 24mm, and the T-pull and the oval T-pull are single-hole handles. See Meir Oppen cabinet handles.
Match the fixing distance to the holes already in the door, or choose a single hole handle. A long pull on a deep drawer reads better than a small knob.
Planning a champagne room
Start with the basin mixer, because it sets the finish. Then choose the shower and the rails in the same finish, and finish with the waste, the handles and the door hardware. If the room has a vanity with a handle, choose the champagne handle so the metal agrees.
Champagne works best when the surfaces are quiet. Plain tiles, pale stone and timber let the metal be the accent. A busy, high-contrast pattern fights it. Order everything from the same finish and the same batch where you can, because the plated and PVD pieces can differ slightly in tone.
Care
Wipe the finish with a soft cloth and warm soapy water, rinse and dry. Avoid abrasive pads, steel wool, bleach and harsh cleaners, because they strip the surface, and wipe brushed or knurled pieces along the grain. Clean the aerator if the spray turns uneven. In a hard water area, dry the tap after use, because water left on the surface leaves marks.
Before you order
Check the spout height and reach against the basin or sink. Read the rating on the exact product, because the flow differs between a basin mixer, a kitchen mixer and a shower. Measure the fixing distance of rails against the wall, and settle the power for the heated rail. Hold a sample against your tile and paint in daylight, and use champagne across every piece in the room.


