Nero X Plus: cross handle basin, wall and kitchen sets
Nero X Plus is a tapware range built on a classic four-armed cross handle and a jumper valve, in matte black, brushed gold and brushed nickel. It is made for replacing an older three piece set with a cleaner, more modern look. The range covers a hob mounted basin set, wall basin and bath sets in two projections, a wall kitchen set with a swivel spout, wall tops, washing machine stops and an all direction shower head.
People search for it as Nero X Plus. This page sets out each set with the ratings and sizes that decide fit, and what is sold together and what is sold apart. For Nero tapware from other ranges, see Nero tapware, and for the kitchen options see Nero kitchen taps.
What is in the X Plus range
| Group | Pieces | Mounting |
|---|---|---|
| Basin | Basin set with a fixed spout, mixer body, hot tap and cold tap | Hob, on a three hole basin or bench |
| Wall basin and bath | Wall basin and bath set with a 180mm or 215mm spout, hot tap and cold tap | Wall |
| Kitchen and laundry | Wall kitchen set with a swivel spout; swivel spout only; washing machine stops | Wall |
| Wall tops | Pair of cross handles with dress plates | Wall |
| Showers | All direction shower head with an adjustable arm | Wall, screw-on |
Finishes
X Plus is made in matte black, brushed gold and brushed nickel. Matte black is flat and strong against pale tiles, and it matches black cabinet handles. Brushed gold is a warm metal that suits timber, marble and cream tiles. Brushed nickel is a soft silver. The brushed finishes are PVD, a coating bonded to the metal in a vacuum chamber, and matte black is electroplated. Keep one finish on the spout and both handles, because the three pieces are meant to read as one.
The hob mounted basin set
The X Plus basin set is a three piece set with a fixed spout in the middle and a separate hot and a cold cross handle on each side, with a jumper valve in each tap. It is rated WELS 5 star at 6 litres a minute and made for a three hole basin or bench. The box holds the basin spout, the mixer body, the hot tap, the cold tap, the installation kit and the instructions. It suits a like for like swap of an older three piece set, because it fits the same holes.
One tap hole or three
A one hole basin takes a single mixer on the bowl. A three hole basin takes a spout in the middle with the hot and cold controls on either side, which is the traditional layout. A basin with no tap hole takes a wall mixer or a bench tap behind the bowl. Hole spacing varies by manufacturer, so check the tap against the basin before you buy, especially if you already own a tap set you want to keep.
Wall basin and bath sets
The wall basin and bath sets put the spout and the two taps on the wall, which keeps the bench or the bath rim clear. They come in two projections. The 180mm set suits a wall hung basin close to the wall, and the 215mm set suits a bath or a wide basin. Both are rated WELS 5 star at 5 litres a minute. The spout alone is sold in each size: the 180mm spout reaches 180mm with a 49mm height to the spout, and the 215mm spout reaches 214mm, also 49mm to the spout, in a PVD finish.
| Piece | Reach | WELS rating | Notes |
|---|---|---|---|
| Wall basin and bath set, 180mm | 180mm | 5 star, 5 L/min | Spout, hot tap, cold tap, installation kit |
| Wall basin and bath set, 215mm | 214mm | 5 star, 5 L/min | Spout, hot tap, cold tap, installation kit |
| Wall kitchen set with swivel spout | 260mm swivel spout | 5 star, 5 L/min | Swivel spout over a single or double bowl |
| Basin set, hob mounted | Fixed spout | 5 star, 6 L/min | Three piece set with mixer body |
The wall tops, the spout and the in-wall fittings are sold in separate packs, so check that you have the handles, the plates and the spout for the set you want, and that the in-wall breach is on the order. The body goes in before the tiles. Measure from the finished tile surface to the centre of the drain, and choose the reach that lands the water in the middle of the basin or the bath outlet.
Planning the wall
Wall mixers, wall taps and spouts go into the wall before the tiles, so settle the position, the spout reach and the finish while the wall is open. Measure from the finished tile surface to the centre of the drain to choose the reach, so the water lands in the middle of the basin or the bath outlet and clears the rim. Check what sits behind the wall, and fix the body to a nogging or a bracket so it holds. Waterproofing behind the body matters, because a missed seal is a leak inside the wall that cannot be fixed without opening the tiles.
Wall kitchen set and laundry
The wall kitchen set has a swivel spout that reaches 260mm, with a height to the spout of 202.5mm, so the water can be directed across a single or a double bowl sink. It is rated WELS 5 star at 5 litres a minute. The box holds the wall spout, the hot tap and the cold tap, and the set suits a kitchen or a laundry where the plumbing is in the wall. The washing machine stops are a pair of wall mounted taps in the same finish, with no WELS rating required. See laundry taps for other laundry fittings.
Wall tops and the shower head
The wall tops are a pair of cross handles with dress plates for a shower, a bath or a basin, with a jumper valve and a retrofit option for an existing wall. Shower taps need no WELS rating. The all direction shower head has an adjustable arm and a screw-off, screw-on fit with no drilling, and it flows at 6 litres a minute with no star rating. See Nero showers for rails and roses from other Nero ranges.
Shower heights and positions
Mark the shower positions on the wall frame before the lining goes up. The centre of a fixed head outlet is usually 2000mm to 2100mm above the finished floor, or 2100mm to 2200mm for a tall household, and a ceiling mounted rain head sits at 2100mm to 2200mm depending on the ceiling height. Wall arms project 300mm to 400mm, and a ceiling arm can be 100mm to 600mm long. A mixer goes at 1000mm to 1100mm from the floor, and a diverter system needs two outlets at different heights, so the plumber must know both before the wall is closed.
Pressure, flow and head size
The supply decides how big a head can be. Round fixed heads usually run from 200mm to 300mm. On a low pressure supply, a smaller head of 150mm to 200mm gives a better spray, and a head larger than 250mm can feel weak unless a pump is fitted. A typical shower flow is 5 to 9 litres a minute, and a flow restrictor in the head keeps the use down. A simple test is to time how long a 10 litre bucket takes to fill. If it fills in under 60 seconds the pressure is good for a large rain head. A tank or gravity supply is usually best with a 3 star head.
Jumper valve taps
A jumper valve tap closes a rubber washer against a seat, and the handle turns through several turns from off to full flow. It is the older and simpler mechanism, and the washer is the part that wears. Ask a plumber to confirm that washers and spares are easy to source for the range you choose. A cross handle is a style choice as much as a function, and it reads as classic on a basin and as a statement in black or gold on a bath.
Caring for the tapware
Wipe the spout and handles with a soft microfibre cloth and warm water, and add a little mild soap if needed. Dry them so water does not set on the surface, which matters most in hard water areas. Keep bleach, harsh cleaners and abrasive pads away from the finish, since they dull plated and coated surfaces. Clean the aerator if the spray turns uneven, and wipe brushed finishes along the grain.
Reading the WELS rating
WELS is the Australian water efficiency label, and more stars means the fitting uses less water. A basin mixer can reach 6 star because a basin needs little water. A kitchen mixer sits at 4 or 5 star because a sink needs a larger flow to fill a pot, and a shower sits at 3 or 4 star because the flow has to be large enough to rinse. Wall mixers and shower taps do not require a rating of their own. Read the rating on the exact piece you are buying, and use a licensed plumber to fit it.
Before you order
Decide the set for the place: a hob set needs three tap holes, and a wall set needs the wall roughed in. Choose the projection from the distance to the drain. Check that the wall tops, the spout and the in-wall parts are all on the order. Choose matte black, brushed gold or brushed nickel and keep it across the room.

