What an in-wall toilet is
An in-wall toilet hides the cistern inside the wall, or inside a cabinetry unit, so only the pan and the flush plate show. The pan is either wall faced, standing on the floor against the wall, or wall hung, held off the floor by a frame. This page lists complete Invisi Series II suites, smart toilets, and "build your in-wall toilet" pans that are sold with a choice of cistern.
The cistern needs a home. In a new build the builder frames it in from the start. In a renovation the wall has to be deep enough, or built out with a bulkhead, a false wall or a cabinetry unit, and a solid brick or concrete wall will usually need that extra framing. The toilets page covers the measurements every toilet shares.
Is an in-wall toilet a good idea?
It is a good idea when the wall is already open. With the cistern out of sight, the room looks less cluttered and the floor is easier to clean around. A wall hung pan clears the floor altogether. The height of the pan can also be set for the household, which helps in an accessible bathroom.
It is not worth it for a simple replacement in a bathroom that is not being updated. The wall design has to be committed to early, and the install is more involved than for a standard suite. In that case a back to wall toilet is the more practical choice, because the cistern is already part of the suite and no wall frame is needed.
Cavity, frame and access
A wall cavity for a concealed cistern typically needs to be at least 120 to 150mm deep. The wall must support the pan and the user and may need reinforcement, and an access panel must be built into the tiling for servicing. A wall structure that cannot carry the load, a set out outside the connector range and a wall hung quote with no access panel planned are red flags. A wall hung toilet needs a steel in-wall frame that supports the weight of the toilet and the user, and the frame must be installed during the build or renovation.
Access and servicing
A plumber reaches the cistern through the flush plate, not by lifting a lid. Some models have removable panels so the wall does not need to be opened. Plan the access before the wall is tiled. The flush plate is also the main visible design element, so the finish should match the tapware and fittings. See the concealed toilet buttons, the Caroma concealed toilet buttons and the Geberit concealed toilet buttons. A plate must suit the specific cistern series behind the wall.
What the suites and pans state
The complete suites on this page, from Caroma, use the Invisi Series II cistern. The Luna Slim suite has an S trap set out of 60 to 160mm. The Contura II has an S trap set out of 60 to 200mm and a P trap set out of 185mm. The Liano cistern can be installed in the wall, in a duct or in the ceiling, and it is serviced from the button panel. See the Invisi Series II collection for the range.
The pan-only suites carry the numbers you need before you choose a cistern. The Bao Elegant in-wall pan has a pan height of 405mm, a projection of 550mm, a P trap set out of 180mm, an S trap set out of 95 to 145mm and a back inlet only. The Turner Hastings Claremont has a pan height of 420mm, a projection of 550mm and a standard set out of 100mm. Set outs over 100mm do not suit it, and a smaller set out of 60 to 90mm needs a 90 degree pan bend. The Caroma Luna in-wall pan has a pan height of 440mm, a projection of 570mm and a variable set out of 60 to 120mm using the supplied connector, with 90mm recommended. These pans are sold with cistern options, so confirm what is supplied before you order.
The Invisi Series II suites, one by one
The Caroma suites share the Invisi Series II 4.5 and 3 litre concealed cistern, which suits in-wall, in-duct, under-counter or in-ceiling installation, and they differ in the pan. The Urbane II suite has a 449mm pan height and a 570mm projection, with an S trap set out of 60 to 120mm. The Urbane suite has a 395mm pan height and a 570mm projection. The Luna Cleanflush and Luna Slim suites have a 395mm pan height and a 610mm projection, with an S trap set out of 60 to 160mm. The Riviere suite has a 435mm pan height, a 570mm projection and an overall height of 982mm. The Contura II suite has a 440mm pan height, a 570mm projection and a set out of 60 to 200mm. The Liano Easy Height suite has a 435mm pan height and a 655mm projection.
The Urbane II Compact has a 435mm pan height and a 500mm projection, and takes a back inlet only, so it only suits a layout that already matches. The Turner Hastings Fino in-wall pan has a 580mm projection, a width of 360mm and a set out of 105mm. Those pans give no box list, so confirm what is supplied before you order.
Which cistern goes with which pan
The cistern is the part that fixes the rest of the choices. The Caroma suites come with the Invisi Series II cistern. The Caroma, Turner Hastings and Bao pan packages named "build your in-wall toilet" come with a Geberit Sigma cistern option or other cistern options, chosen on the product page. The Nero in wall push plate suits the Bao Elegant in-wall suite with an R&T cistern. The Seima pneumatic 500 Series plate suits four Seima in-wall cisterns, the C100 and C101 for floor mount pans and the C200 and C201 for wall hung pans. In every case the plate, the cistern and the pan must belong together. The plate for each cistern is on concealed toilet buttons, and the Geberit packages are on Geberit cistern and toilet suite packages.
Pan height is set when the frame goes in
A wall hung or concealed cistern pan has no height you can adjust later. Wall hung suites can be set to any height at installation. A comfort rim height is about 430 to 480mm against a standard 380 to 400mm, and the usual toilet height is about 39.5cm with ambulant toilets at 46 to 48cm. The pans on this page state their own heights without the seat. They are 395mm on the Luna and Urbane Invisi suites and 405mm on the Contura II wall hung and Bao in-wall pans. The Claremont is 420mm, and the Liano, Riviere and Urbane II suites run from 435 to 449mm. Decide the height with the people who will use the toilet before the frame is fixed, and add the seat to the pan figure when you compare it with the rim height you want.
Pan and flush choices
Dual flush is standard on most current systems, and the suites here are 4 star under WELS with a 4.5 litre full flush and 3 litre half flush. For rimless bowls see rimless toilets. If you are looking for a Geberit in-wall cistern, the Geberit cistern and toilet suite packages sit together in their own collection. For a smart toilet, see smart toilets and bidets.
Water use and bidet suites
WELS rates a toilet from the water used by four half flushes and one full flush, and the usual minimum is 4 stars for a new home and 3 stars for a replacement, with local rules possibly differing. An in-wall build is usually a new build or a full renovation, so confirm the figure that applies. The Caroma Urbane II Invisi Series II bidet suite is the in-wall bidet option on this page. It has an electronic bidet seat and remote, so the wall also needs a planned power point, and the page on wall faced smart toilets covers it in full.
The smart and bidet options in the wall
The St George Coogee is a smart toilet with a UV-sterilised wand, an auto open and close lid and Air-mix Wonder Wash, along with a heated seat, a warm air dryer and a deodoriser. It has a built-in tank, so it belongs here for the room around it: the plumbing and the power point are roughed in before the walls are finished. The Caroma Urbane II Invisi Series II bidet suite is built on the in-wall cistern, so the pan sits flush to the wall and the plumbing stays out of sight. Its washing is adjustable from a remote, covering water and air temperature, flow and nozzle position, with oscillating and pulsating modes, and the seat is heated and opens and closes on its own. Both need a power point near the toilet, which is another item for the early plan.
Keeping an in-wall toilet clean
The pan and the plate are the only parts you can reach, so look after both. Clean the pan weekly with a mild, non-abrasive bowl cleaner and a soft brush, and avoid scouring pads and steel wool, which can dull the glaze. Wipe the plate with a damp cloth and keep cleaner splashes off its plated finish. Treat scale early with a cleaner made for hard water deposits. The cistern is behind the wall, so in-tank cleaners are not a risk on this format, but a running cistern or a weak flush is a job for a plumber working through the plate opening.
Shop by brand
Caroma toilets, Turner Hastings toilets and Bao toilet suites are the three brands with in-wall pans on this page. For a household that needs a taller pan or more clear space, see accessible toilets.


