Meir Spouts

Meir spouts are standalone bath and basin outlets designed to pair with a wall mounted mixer, giving you a way to fit out a wall mounted tapware setup piece by piece rather than buying a single combined unit. The range covers both bath and basin applications across a solid spread of finishes, making it straightforward to match a spout to an existing Meir tap set or to build a bathroom around a chosen finish from the ground up.

How Meir spouts fit into a tapware setup

In a wall mounted arrangement, the mixer or tap handles sit on the wall and control temperature and flow, while the spout is a separate fixed outlet that directs water down into the bath or basin. Buying these as separate components means the spout can be chosen for the right reach and drop for your specific bath or vanity, and it can be replaced on its own later without needing to change the whole tap set.

Bath spouts and basin spouts

Meir's spout range includes options sized for both baths and basins. Bath spouts are built for a higher flow rate and a longer reach, which suits filling a tub at a reasonable pace, and are typically fitted alongside a wall mounted bath mixer. Basin spouts are shorter and lower flow, sitting above the basin bowl with a separate basin mixer nearby controlling the water. Reach is the detail to get right in both cases, since an undersized spout will not clear the bath or basin properly and an oversized one risks water splashing past the bowl.

Finish selection across the range

Meir spouts are available in a range of finishes that mirror the brand's broader tapware collections, from chrome through to brushed metallic tones and matt finishes for a more contemporary bathroom. Because a spout is usually installed alongside a separate mixer, shower or tap set, the practical approach is to lock in the finish for the whole bathroom first, then confirm that finish is available on the specific spout length or style you need.

Points to check before ordering

• Distance from the wall outlet to where the spout needs to sit over the bath or basin
• Spout drop height, particularly for freestanding baths positioned away from the wall
• Flow rate suited to bath filling versus basin use
• Finish consistency with the wall mixer, shower and other tapware in the room

Installation notes

Meir spouts are made for standard wall mounted rough in plumbing, so they are straightforward to specify for a new bathroom build. If you are retrofitting a wall mounted spout into an existing bathroom that currently has deck mounted tapware, the water supply will need to be relocated into the wall, which is a plumbing job best planned before tiling begins rather than after.

Buying tips

Work out whether you need a bath spout or a basin spout first, since the sizing and flow rate differ between the two, then measure the actual distance and drop required for your bath or vanity before choosing a length. From there, match the finish to the wall mixer and any other tapware being installed in the same room so the finished result reads as one considered scheme rather than mismatched pieces.

Frequently Asked Questions