Small laundry solutions buying guide
In a small laundry the tape measure decides. Find the width of the gap, then pick a route: a tub-and-cabinet unit that stands on the floor, or a bench sink set into a cabinet. A gap of 400 to 450mm takes a compact bowl comfortably. Anything narrower calls for the smallest units, which start at about 300mm wide.
How small a laundry sink can be
Laundry sinks are sized in litres, and small ones hold far less than a standard tub. The smallest hold around 16 to 19 litres and measure about 300mm across. Mini tubs go up to around 30 litres, against the 45 litre standard tub. Compact bowls are generally 400 to 450mm wide and 220 to 250mm deep, and the smallest units are shallower, at 180 to 200mm. The Clark Utility Mini is a 16 litre unit with a 180mm deep bowl, built for apartments, townhouses and internal laundries.
Depth matters as much as width. A shallow bowl fits a tight cabinet but holds less water and splashes more, so compare the bowl depth of two units before you decide which is smaller.
Small laundry options in this collection
| Option | What it is | Suits |
|---|---|---|
| Clark Utility Mini 16 litre | A tub and cabinet in one unit, with a 180mm deep bowl, a basket waste and a side entry for concealed washing machine taps | The narrowest gaps, in apartments and internal laundries |
| Clark Eureka 35 litre compact | A tub and cabinet with a bypass kit, or an optional concealed bypass kit, a side entry and a child-resistant latch | A small laundry that still needs a larger bowl |
| Clark Square 25 litre | A 304 stainless steel sink for a bench, with a basket waste and a concealed bypass, installed overmount, and available with no tap hole or one | A small cabinet with a bench top |
| Otti 650mm mini laundry | A single door base cabinet with an adjustable shelf and a 650mm stone benchtop, cut for the Otti Axon sink | A small laundry that wants furniture instead of a steel unit |
| Otti 650mm cabinet set | A base cabinet, a wall cabinet and a 650mm stone benchtop | A small wall with room for storage above the bench |
Some small stainless steel sinks in this collection are made for bars, butler's pantries and small kitchens, not for the laundry. The Meir Kitchen Mini is a 382mm by 272mm single bowl, 150mm deep, in 304 stainless steel with a PVD finish in brushed nickel, tiger bronze or brushed gunmetal. The Caroma Luna sinks come in a round and a single bowl shape and can be installed overmount or undermount. Check the depth before you use a small bar or kitchen sink for laundry jobs, since the Meir bowl is only 150mm deep.
Standard sizes for comparison
A small sink makes more sense next to the standard sizes. Standard laundry tubs are 45 litres for general use and 70 litres for heavy duty. Their bowls are 400 to 600mm wide, and 450 to 500mm suits most laundries. Depth for general use runs from 220 to 280mm, and a soaking or utility tub goes deeper, to 280 to 350mm. A freestanding unit stands about 870 to 900mm high, and a finished benchtop sits at 900 to 920mm.
Those numbers set the trade-off: going small saves width and gives up some capacity and depth. For hand-washing, rinsing and the odd bucket, a compact bowl does the work. For regular soaking of bulky items, a standard tub earns its space, and laundry sinks covers those sizes.
What a laundry has to have
The National Construction Code requires at least one washtub in a house or apartment that has a laundry, and a kitchen sink or washbasin cannot be counted as that washtub. A small laundry still needs one. The compact units here meet that need in a smaller footprint.
Stainless steel in a small laundry
Most of the small sinks here are stainless steel. Stainless is light, it resists rust, heat and stains, and thicker steel dents and flexes less and sounds less tinny when something heavy lands in the bowl. Satin stainless hides scratches and water marks better than a mirror polish. The Clark Square and the Meir Kitchen Mini are both 304 grade stainless steel, and the Meir Mini is 1.5mm thick.
The Meir Kitchen Mini sinks have a brushed PVD finish in brushed nickel, tiger bronze or brushed gunmetal, and they are made for small kitchens, bars and butler's pantries. The Clark Square is made as a laundry sink, with a basket waste and a concealed bypass, so it is the closer fit when the sink is going into a laundry.
Unit or bench sink
A tub-and-cabinet unit suits a laundry with no cabinetry. The tub, the cabinet and the basket waste come as one product, so only the tap is left to choose. The Clark units listed above are examples. A bench sink suits a laundry that already has a cabinet, or one you are building. It sits in the benchtop, with supplies stored in the cabinet below.
The fitting method matters more in a small laundry, because the bench is short. An overmount sink sits on top of the benchtop with its rim visible, and it works with almost any bench, including laminate. An undermount sink is fixed beneath the bench, so there is no rim and the bench looks cleaner, and it needs a waterproof solid bench such as engineered stone or granite. Choose an undermount sink if you want the full length of the bench free to use.
The Otti mini kits
The Otti 650mm mini laundry is built for the narrow room. It is a single door base cabinet in moisture-resistant plywood, with a 650mm stone top that is precut for the Axon sink. The cabinet is 632mm wide, 585mm deep and 880mm high, and it arrives assembled, with an adjustable internal shelf and a soft-closing door. The sink measures 520mm by 440mm and is 220mm deep. The sink, the basket waste and the sink mixer are sold separately. The cabinet set adds a wall cabinet, 632mm wide, 323mm deep and 600mm high, which puts storage above the bench in the same footprint.
The stone top comes in pure white, matte white or cloudy carrara solid surface, and some sets also offer natural carrara marble. Standard tops have semi-drilled tap holes in several positions, so the tap position is chosen on site with a 50mm diamond bit. The natural carrara marble top has no tap holes on some sets and a single hole at the 12 o'clock position on others, which suits a wall-mounted tap. In a short run, that choice decides how much bench is left beside the tap.
Choose the finish to match the rest of the house. The Otti ranges include Byron in natural oak and black oak with a timber-grain finish, Hampshire in painted white and black, Bondi and Noosa in white, with fluted fronts on some, and Marlo in black. For the full range of sets and sizes, see 650mm mini laundry packages and laundry cabinets.
Tap, corner and narrow gaps
A small laundry works best with a space-saving mixer, and the tap should be chosen with the sink. Sinks come with no tap hole, one tap hole or two, and the position of the hole decides which tap fits. Browse laundry taps once you know the sink.
A corner needs its own measurement. Measure along both walls and the diagonal, and allow room for the door to swing before you commit to a cabinet. The door on the Otti mini cabinet can be mounted to open left or right, which helps in a tight corner.
If you want a larger bowl, the wider range is in laundry sinks. If you prefer a sink that comes with its cabinet, see laundry sink and cabinet units.
Caring for a small sink
Rinse with warm water after use and wipe with a mild detergent and a soft cloth. On stainless steel, follow the grain. Keep abrasive powders, bleach, chlorine-based cleaners and steel wool away from the sink. Dry stainless steel with a microfibre cloth to prevent water spots. Silicone around an overmount or undermount sink needs replacing every three to five years, so check it when you clean, and look under the sink each month for leaks and moisture.
Match the sink to the space
| If your laundry has | Choose |
|---|---|
| A very narrow gap | The Clark Utility Mini, the smallest unit here |
| A gap of 400 to 450mm | A compact bowl of 220 to 250mm depth |
| No cabinet at all | A tub-and-cabinet unit |
| A short bench of about 650mm | An Otti 650mm mini laundry |
| A small wall with space above the bench | An Otti 650mm cabinet set with a wall cabinet |
| A laminate bench | An overmount sink |
Before you order
Run four checks. Measure the gap in width, depth and height. Choose between a unit and a bench sink. Confirm what is in the box, since the Clark units include a basket waste and the Otti sets leave the sink, waste and mixer to you. Pick the tap last, once you know where the tap holes sit.

