Laundry cabinets buying guide
Start with the washing machine. Where it sits decides how long the run needs to be, if the machine goes inside a tall cabinet or beside a bench, and how much wall is left for storage above. Then look at the finish of the rooms either side. Most laundries are well served by a base cabinet with a stone top next to the machine, a wall cabinet above the bench, and a finish that matches the adjoining rooms.
Base, wall and tall cabinets
A laundry run is built from three kinds of cabinet. The base cabinet carries the benchtop and the sink, and holds detergents and cleaning supplies below. The wall cabinet sits above the bench and adds storage without using floor space. The tall cabinet is made for the washing machine, so the machine sits inside the joinery instead of beside it.
The cabinets in this collection are made from moisture-resistant plywood, which holds up around damp better than MDF. They arrive assembled, with soft-closing doors. A standard base cabinet is 632mm wide, 585mm deep and 880mm high. A standard wall cabinet is 632mm wide, 323mm deep and 600mm high. Mini kits are narrower: one single door base cabinet and a stone top, built as a small wash zone.
Choosing a set
Most buyers start with a set, because the cabinets, benchtop and end panel are designed to fit together. In the 1305mm and 1715mm ranges the sets follow a letter system.
| Set | What it includes | Suits |
|---|---|---|
| Set A | A double door base cabinet, a double door wall cabinet, an end panel with installation kit for the side of the washing machine, and a stone benchtop | A machine beside the cabinet, with one wall cabinet above the bench |
| Set B | A base cabinet and two wall cabinets, with the end panel and stone benchtop | A laundry that needs more storage above the bench |
| Set C | A base cabinet, a wall cabinet and a tall washing machine cabinet, with a shorter stone benchtop | A front-loading machine built into the joinery |
The machine type settles the choice. A front loader opens at the front, so it can sit inside a tall cabinet or beside the bench with an end panel. A top loader opens from above, so measure the space over the lid before you place a wall cabinet. The pages for front loader laundry cabinets and top loader laundry cabinets narrow the range to each case.
Which length fits the room
Sets are sold by overall length, and the length you can fit is a measurement of the wall. Measure from corner to corner and leave room for the machine.
| Length | What it gives you | Where to look |
|---|---|---|
| 430mm and 650mm mini kits | A small wash zone with a stone top and one cabinet | 650mm mini laundry packages, and small laundry solutions for narrow rooms |
| 1060mm | A mid-size run for a laundry a little short of a full wall | Otti laundry packages |
| 1300mm and 1305mm | The standard full run: base cabinet, wall cabinet and room for the machine | 1300mm laundry packages and 1305mm laundry packages |
| 1715mm | The longest run, for a laundry with a full wall to fill | 1715mm laundry packages |
Cabinet widths inside a set are fixed, so the set length is what you plan the room around. If the wall is longer than the set, the gap beside the cabinets suits a tall storage unit or a drying rack. If the wall is shorter, take the next length down. Trimming a cabinet is not an option.
Benchtop, sink and tap
Sets come with a stone benchtop cut to suit the Otti Axon laundry sink. The benchtop is 600mm deep, and it comes in pure white, matte white and cloudy carrara solid surface. Some sets also offer a natural carrara marble top. Standard tops have semi-drilled tap holes in several positions, so you choose the tap position on site. The natural carrara top has no tap holes, which suits wall-mounted tapware.
The sink, the sink mixer and the basket waste are not part of the set. You choose them separately. To compare sinks first, see laundry sinks, and for the tap see laundry taps. A cabinet that already includes its sink is a different product, found in laundry sink and cabinet units.
Handles come with some sets and not others, so check the set you choose. Brushed gold and brushed nickel are available as alternatives, so match them to the tap finish if you want the fittings to read as one set.
The Otti Axon sink measures 520mm by 440mm and is 220mm deep, and the 1300mm benchtop in a Set B is cut to take it on the left or the right. Check that the depth of the bowl suits what you wash. A bucket, a soaking basin and a large item of bedding each need different room, and the sink choice is the part of the laundry you cannot change after the bench is cut.
Finish and range
Two finishing methods are used across the ranges. The painted Hampshire fronts are 2 pac polyurethane on moisture-resistant plywood. The Byron timber-grain fronts are a timbergrain finish on the same plywood.
The finish is the part of a laundry you see every day, and it is easiest to choose by what it sits next to. Painted white keeps a small laundry bright. Black gives a stronger contrast against a white stone top. Timber grain warms the room and suits a laundry that opens onto the kitchen or the hallway. Fluted fronts add texture and shadow without adding colour.
If the laundry opens onto the kitchen or a hallway, pick the finish closest to the joinery in that room. The laundry then reads as part of the house instead of a separate utility space. Matte black, brushed gold and brushed nickel handles all suit a stone top, and the handle finish can follow the tap finish.
- Byron is a timber-grain range in natural oak and black oak.
- Havana is a fluted range in sable walnut and woodland oak.
- Hampshire is a painted range in white, matte white, black and matte black.
- Bondi and Noosa are white, and Noosa has fluted fronts.
- Marlo is a fluted range in black.
The finish pages sort the cabinets by colour: white laundry cabinets, black laundry cabinets and woodgrain laundry cabinets.
Choosing the stone top
The benchtop has to match the rest of the laundry, so look at it next to the cabinet finish before you decide. Pure white and matte white suit painted cabinets and keep the room clean-lined. Cloudy carrara has a soft veining that works against timber grain and darker fronts. Natural carrara marble is the most distinctive option, and because it has no tap holes it pairs with a wall-mounted tap. Check the tap position against the sink before you order, since the semi-drilled holes are finished on site with a 50mm diamond bit.
Mini kits for a small laundry
A mini kit is the answer when the room cannot take a full run. It combines a single door base cabinet with a stone benchtop and works as a wash zone in its own right. The 430mm kit has a 430mm stone top precut for the Otti Axon sink, with semi-drilled tap positions. The cabinet arrives assembled with an integrated kickboard and an adjustable internal shelf. Its soft-closing door can be mounted to open left or right, so it can swing away from the wall or the machine. The sink and the sink mixer are sold separately, as they are with the larger sets.
The larger sets share these details. The sink can go on the left or the right of the benchtop, so the tap can sit on whichever side suits the wall and the plumbing. The base and wall cabinets in a Set C have adjustable shelves, so the inside can be set to the height of what you store. Mini kits and full sets use the same moisture-resistant plywood, so a small laundry gets the same build as a large one.
Match the laundry to the set
| If your laundry has | Choose |
|---|---|
| A front loader and a clear wall | A 1300mm or 1305mm set, with the machine beside the bench |
| A front loader you want hidden | A Set C with the tall washing machine cabinet |
| A top loader | A set with a base cabinet and wall cabinets placed clear of the machine lid |
| A narrow room or a corner | A 430mm or 650mm mini kit |
| A full wall to fill | A 1715mm set |
| A dark, contrasted room | Black or black oak with a white stone top |
Before you order
Run four checks. Measure the wall and the space for the machine, including the door swing or the lid. Decide whether the machine goes inside a tall cabinet or beside the bench. Pick the sink and the tap together, so the bench cut-out and the tap holes agree. Confirm that the finish suits the rooms either side of the laundry.
An end panel finishes the side of the run where the machine meets the cabinet, and it is included in the sets that use one. A laundry with a tall cabinet needs less wall for storage, because the tall cabinet takes the place of the wall cabinet over the machine.


