Thermogroup Underfloor Heating 200W/m² Dual Controller Kit
Rapid warm-up, efficient operation - manufactured in Great Britain and covered by a Lifetime Warranty.
$535
$134
(-20%) off
RRP of
$669
Delivery Insurance Included
No Credit Card Fees
Easy Returns
SKU: 112002TD
Bathroom Heating & Ventilation by Thermogroup
A complete 200W/m2 underfloor heating kit built around a Thermonet mat, sized from one to ten square metres of free floor space. The dual thermostat is the point of difference: it runs the floor and a second appliance, such as a heated towel rail, on separate schedules from a single wall plate. The mat installs wire-side-down so the mesh protects the cable while you work, and it can go under a 20 to 50mm screed or directly beneath the tiles.
- Dual thermostat controls the floor and a second appliance such as a heated towel rail on separate schedules, which the single-thermostat kits in the range can't do
- Supplied as a complete kit with mat, dual thermostat, floor sensor, sensor conduit, cable monitor and installation guide, so there's nothing left to source
- Kits from 1 up to 10 square metres, sized to the free floor area you're actually heating
- Installed wire-side-down, so the hard wearing mesh protects the heating cable while the rest of the trades work
- Suits screeds from 20mm to 50mm, or straight under the tiles, and runs to a maximum of 28 degrees
- IP68 rated with a 5m cold tail, made in the UK
- Supported by a lifetime system warranty, plus 3 years on the thermostat
Specifications
Width: 500mm
Heated width: 430mm
Thickness: 3.5mm
Max. temperature: 28°C
IP rating: IP68
Voltage: 240V
Wattage: 200W/m²
Conductor type: Single ended
Cold tail length: 5m
Heated width: 430mm
Thickness: 3.5mm
Max. temperature: 28°C
IP rating: IP68
Voltage: 240V
Wattage: 200W/m²
Conductor type: Single ended
Cold tail length: 5m
Warranty: Lifetime on heating mat and 3 years on thermostat
Specifications
Greater efficiency can also be achieved by including by:
- Including a layer of insulation
- Splitting the heating into different zones
- Using a programmable thermostat to only have the heating on when you need it
There is a number of factors that will influence the efficiency and the running costs of your underfloor heating. This includes:
- The set temperature
- The size and design of the room/home
- Level of insulation
- External temperatures
- Flooring products used
- Your electricity tariff
- Length of time the floor heating is on
- If there is any other heat sources in the room
To get an estimated running cost use Thermogroup's running costs calculator.
FAQ's
Click here to see Why Underfloor Heating is a must for your bathroom and to see all of the answers to your questions.
What's In The Box
- Thermonet 200W/m² Mat
- Programmable Thermostat
- Floor Temperature Sensor
- Sensor Conduit
- Cable Monitor
- Installation Guide & Warranty Form
Downloads
Download the specification sheet below:
Thermogroup Underfloor Heating 200W/m² Dual Controller Kit
Download the installation instructions below:
Thermogroup Underfloor Heating 200W/m² Dual Controller Kit
