Stainless steel laundry sinks buying guide
For most laundries the right sink is a single bowl of about 45 litres in 304 stainless steel. It is light, it resists rust, heat and stains, and it copes with the knocks a laundry gives it. From there the choices are size, fitting method and what comes in the box. This page sets out the sizes in the range, the mounting rules and the care that keeps a stainless steel sink looking new.
Laundry sink, laundry tub, laundry trough, utility sink and wash tub all name the same deep basin. Most people say sink or tub, and trough is the usual word in Western Australia and Victoria. Stainless steel stands up to soaking, mop buckets and muddy boots, which is why it is the common choice.
Standard laundry sink sizes
Laundry sinks are sized in litres, and two sizes are standard. A 45 litre sink suits general use, and a 70 litre sink suits heavy duty. The bowls are generally 400 to 600mm wide, and a width of 450 to 500mm suits most laundries. Depth for general use runs from 220 to 280mm. A compact sink has a bowl 400 to 450mm wide and 220 to 250mm deep, and the smallest sinks start at around 300mm wide.
Capacity matters less than the fit. A freestanding unit stands about 870 to 900mm high, and a finished benchtop sits at 900 to 920mm. Measure the cabinet or the gap first, then choose the largest bowl that fits it. In a small laundry, a space-saving mixer and an undermount sink both free up bench space. For narrow gaps, small laundry solutions is the page to start with.
The sizes in this collection
| Sink | Size and capacity | Worth knowing |
|---|---|---|
| Fienza Tiva 22 litre | 500mm by 390mm, 200mm deep | Topmount, with two tap holes |
| Fienza Hana 39 litre | 510mm by 420mm, 230mm deep | Topmount or undermount, with an overflow and no tap hole |
| Fienza Tiva 45 litre | 635mm by 475mm, 250mm deep | Topmount, with two tap holes |
| Fienza Hana 50 litre | 580mm by 445mm, 240mm deep | Topmount or undermount, with an overflow |
| Fienza Tiva 50 litre | 600mm by 500mm, 250mm deep | Topmount, with two tap holes |
| Fienza Hana 70 litre | 650mm by 450mm, 290mm deep | Topmount or undermount, with an overflow |
| Fienza Tiva 70 litre | 675mm by 505mm, 310mm deep | Topmount, with two tap holes |
| Phoenix 2000 Series single bowl | 461mm by 411mm, 250mm deep | Undermount or overmount, with an overflow and a centre back waste |
The Clark and Caroma ranges add more sizes. Clark laundry sinks run from the 16 litre Utility Mini to the 70 litre Flushline and Eureka tubs, with the Square sinks in between. Caroma laundry sinks add the Luna 45 litre and the Single 45L tub, and Fienza laundry sinks lists the Hana and Tiva ranges on their own.
Range by range
The Fienza Hana sinks come in 39, 50 and 70 litres and suit a topmount or an undermount fit. The 70 litre has a hard-wearing surface that resists scratches, chips, stains and discolouration, and a smooth finish that cleans quickly. The dampening panels help reduce noise during use, and the Hana 50 litre is brushed stainless steel.
The Fienza Tiva sinks are designed for laundries and are topmount only. They are made from polished 304 stainless steel with two tap holes, so the mixer can go on the left or the right. The 22 litre is the compact Tiva, and the 70 litre is the largest. All the Tivas include a flexible bypass kit for the washing machine drain. Each also comes with sealing tape and mounting clips, and a cover for the tap hole you leave unused.
The Phoenix 2000 Series has a machine-pressed design for a clean look. Its extra depth holds a soaking bucket, and its centre back waste gives a better plumbing layout. It can be undermounted or overmounted, and it matches the rest of the Phoenix range.
The Clark Square sinks are bench sinks with a concealed bypass, and the Flushline tubs are low-profile tubs for a custom benchtop. The Caroma Luna 45 litre has a tap landing with one tap hole, and the Caroma Single 45L is a tub with no overflow. The Clark Utility, Eureka and Mini units are tub and cabinet units, sold with the cabinet.
Cutting the opening
Every sink needs an exact opening, and the actual sink is the best guide to its own size. Dimensions on a drawing can differ from the product you receive, so measure the sink on site before the cut-out is made. Check the tap position before you cut, and make sure the opening suits the mounting method.
Watermark and finish
Every Fienza sink in this range is Watermark certified, and so are the Phoenix sink wastes. The Tiva sinks are polished and the Hana 50 litre is brushed. Clean a brushed finish along its grain.
Grade and thickness
Grade 304 is about 18 percent chromium and 8 percent nickel. That gives it corrosion resistance, though no stainless steel is completely rustproof. The Fienza, Phoenix, Clark Square and Caroma sinks here are all 304 grade.
Thickness affects how a sink feels. Thicker steel dents and flexes less, and it sounds less tinny when something heavy lands in the bowl. Sound-deadening pads under the bowl help with the same noise. The Fienza Hana sinks are hand made from 1.2mm steel, have sound and vibration dampening panels, and carry an anti-condensation coating underneath that prevents mildew. Satin stainless hides scratches and water marks better than a mirror polish.
Topmount, undermount or flush
- A topmount sink, also called overmount, sits in a cut-out with its rim on the bench. It works with almost every bench, including laminate, timber and stone, and the rim covers the cut edge. The silicone along the rim can peel and let water into the cabinet, so check it when you clean.
- An undermount sink is fixed beneath the bench. There is no rim, so crumbs sweep into the bowl. It needs a waterproof solid bench such as engineered stone, granite, marble or concrete, never laminate or timber, and the join collects grime in the silicone.
- A flush-mount sink sits level with the bench and has the same bench limits as an undermount sink.
The Hana sinks suit either method, with mounting brackets and screws supplied. The Tiva sinks are topmount, with sealing tape and mounting clips supplied. The Phoenix 2000 Series can be undermounted or overmounted. Choose topmount for a laminate or timber bench, and undermount for a stone bench when you want the clean line. Silicone around the sink needs replacing every three to five years either way.
What comes with the sink
The inclusions differ by range, so check them before you order. The Hana sinks come with a basket waste and an overflow kit. The Tiva sinks come with a basket waste, a flexible bypass kit and a cover for the tap hole you leave unused. The Phoenix 2000 Series comes with a basket waste in a matching finish and a fixing kit. The Clark sinks come with a stainless steel basket waste.
The tap holes decide the tap. The Tiva sinks have two tap holes for a left or right mixer, and the Hana 39 litre has none, which suits a wall-mounted tap. See laundry taps once you have chosen the sink.
Stainless steel or ceramic
Stainless steel is the lighter, more forgiving choice, and a dropped bucket does it no harm. Ceramic is heavy, needs a stronger cabinet and can chip under a heavy impact, but it suits a classic or Hamptons laundry. If the look matters more than the weight, see ceramic laundry sinks. For the wider range, see laundry sinks.
What a laundry has to have
The National Construction Code requires at least one washtub in a house or apartment that has a laundry, and a kitchen sink or washbasin cannot be counted as that washtub. If you want a tub that comes with its own cabinet, see laundry sink and cabinet units.
Caring for a stainless steel sink
Dry off water droplets after use with a clean, dry cloth, because that keeps water spots from forming. Clean with a soft cloth and a mild detergent, following the grain, rinse thoroughly and dry. Do not use steel wool, abrasive cleansers or cleaning pads. Do not use silver cleaners, bleach or detergents that contain chlorine. Check under the sink each month for leaks and moisture.
Match the sink to the laundry
| If your laundry has | Choose |
|---|---|
| A standard cabinet and general use | A 45 litre sink such as the Tiva 45 litre |
| Bulky items and heavy use | A 70 litre sink such as the Hana or Tiva 70 litre |
| A narrow gap | The Tiva 22 litre or the Clark Utility Mini |
| A stone bench and a clean line | A Hana sink, undermount |
| A laminate or timber bench | A Tiva topmount sink |
| A wall-mounted tap | The Hana 39 litre, which has no tap hole |
Before you order
Run four checks. Measure the cabinet or the gap. Choose the mounting method to suit the bench. Confirm what comes in the box. Choose the tap and the sink together, so the tap holes agree.

