Skip to content
Back to Life Interiors
Australia's Largest Online Renovation Retailer
Australia's Largest Online Reno Retailer
Back to RenoIQ

How to Install Aluminum Venetian Blinds

Complete Guide to Installing Aluminum Venetian Blinds

Before installing your blinds, ensure you have read through the instructions thoroughly, and make a checklist of what you need before commencing the installation process.

Take your time with this and remember to contact us with any questions!

Step 1: Using a pencil, mark where you will be placing your brackets within the recess of your window. Use the bracket as a guide for where to draw your markers. You should place your brackets a minimum of 90mm away from the side of the window frame, and a maximum of 150mm.

Step 2: Place the bracket on the inside of the original pencil marking, and draw an additional mark inside the drill hole of the bracket to indicate where you will be drilling.

Step 3: Drill your pilot holes where you have made your markings in preparation for installation of the brackets.

Step 4: Place the screw and drill through the bracket, and drill the bracket into the pilot hole securing it to the window frame.

Step 5: Clip your Venetian blind into the secured brackets.

Step 6: Using the cord tidy clip, make a marker of where you would like to drill it into the window frame. Drill your pilot holes, then secure the cord tidy clip to the window frame. This must be placed a minimum of 1500mm above the floor.

Tip: Place the cord tidy clip closer to the glass window to avoid the Venetians hitting the clip when rolling your blinds up and down.

Watch: How to Install Your Aluminum Venetian Blinds

Blinds Sample Pack

Our Blinds sample packs allow you to choose a selection of colours, fabrics and textures to help make your dream blinds come to life.

Previous article Reno IQ is Here!
Next article Tint: Our Premium Paint Brand