*View accurate shipping rates and availability
900mm Door Pull Handles
5 products
-
Original price $476Current price $381Zanda Round Profile Pull Handles 900mm Stainless Steel
This streamlined and elegant handle is a very simple and effortless solution for a door handle. The design explores verticality and the illusion of...
View full details -
Original price $967Current price $774Zanda Nitro Offset Pull Handles 900mm Matte Black
Offset Pull Handles are ideal for doors where you are trying to get the handle away from the locking mechanism and are suitable for use with hinged...
View full details -
Original price $700Current price $560Zanda Nitro Offset Pull Handles 900mm Stainless Steel
Offset Pull Handles are ideal for doors where you are trying to get the handle away from the locking mechanism and are suitable for use with hinged...
View full details -
Original price $714Current price $571Zanda Omega Offset Pull Handles 900mm Stainless Steel
Offset Pull Handles are ideal for doors where you are trying to get the handle away from the locking mechanism and are suitable for use with hinged...
View full details -
Original price $824Current price $659Zanda Polo Pull Handles 900mm Satin Brass
This solid looking, unadorned pull handle embodies the rigid conformity of form following function which was evident in the Modernist period. For a...
View full details
Door pull handles in the 900mm length suit entrance doors, pivot doors, and commercial-style residential doors where a standard 150–300mm pull would look undersized. This collection covers tubular and D-section bar pulls, back-to-back sets, and offset configurations, available in finishes from matte black and brushed nickel through to brushed brass and antique brass.
What is a 900mm door pull handle used for?
A 900mm pull handle spans roughly 90 cm and is sized for doors that are 2100 mm or taller, front entry doors with a wide stile, or any installation where the full-height grip is a deliberate design choice. At that length, a single bar running from near the top to near the bottom of the door provides grip across the full swing arc, which is useful for heavy doors and for accessible design where a person cannot reach a centred knob.
They are also common on frameless glass entry doors, large pivot doors, and commercial applications repurposed into residential builds.
What types of 900mm pull handles are available?
The main types are tubular bar pulls (round or square section), D-section pulls (the bar arcs away from the door face), offset pulls (the bar is offset from the rose or backplate to clear the door frame), flush pulls (recessed into the door face, used on sliding and cavity doors), and back-to-back sets (two pulls fixed through the door, one each side). Tubular and D-section are the most common for entrance and pivot doors; flush pulls are specific to sliding and barn door applications.
What size backplate or fixing centres should I specify?
For a 900mm overall length pull, fixing centres (the distance between the two bolt positions) typically fall between 800 mm and 850 mm, depending on the manufacturer. The backplate or rose diameter is usually 40–65 mm. Always confirm fixing centres before ordering, because the bolt holes in the door must align with the product spec. Most suppliers publish a technical drawing in the product listing.
For back-to-back sets, you also need to confirm the door thickness the through-bolts are rated for, which is usually 35–55 mm for residential timber doors.
Which finishes are available and how do they hold up?
The most requested finishes for 900mm pull handles in Australia are matte black, brushed nickel, brushed brass, satin chrome, and antique brass. Matte black and brushed finishes are applied by PVD (physical vapour deposition) or powder coat over stainless steel or zamak alloy; PVD is more durable and does not chip. Chrome and satin chrome are typically electroplated. For external or semi-exposed positions, look for a product rated to AS 4145 or supplied in 316 stainless steel, which resists salt-laden coastal air. Interior pulls have fewer exposure requirements.
Can a 900mm pull handle be used on a sliding or cavity door?
A projecting bar pull is not suited to a sliding door because the handle would prevent the door from sliding into a wall cavity. For sliding and barn doors, use a flush pull (also called a pocket pull or recessed pull), which sits flush with the door face. Flush pulls in the 900mm length are available as a single recessed bar running nearly the full door width, common on modern minimalist joinery.
For cavity sliders, check the door thickness and the recess depth required before ordering, as flush pulls need a routed recess in the door leaf.
How do I choose between a back-to-back set and a single-sided pull?
A single-sided pull is fixed to one face of the door only and suits doors that are always pushed from the reverse side, such as a gate or a door with a lever set on the inside. A back-to-back set has matching pulls on both faces, connected by through-bolts, and is used where you want a consistent handle appearance on entry and exit, or where no separate lever or knob is fitted. Back-to-back sets require drilling through the door, so door construction (solid timber vs hollow core) affects suitability. Solid-core and solid-timber doors work reliably; hollow-core residential doors may need reinforcement blocking.
What else pairs with a 900mm entrance pull?
On an entrance door, the pull is typically used alongside a deadbolt or mortice lock set operated from inside by a turn-and-release. For matching hardware across the home, consider pairing the finish with your interior door handles and cabinet handles. If the pull is for a bathroom or laundry door, finishing consistency with tapware and accessories strengthens the overall scheme. Brushed brass pulls pair naturally with warm-toned taps and bathroom vanities in timber or stone veneer.
Frequently Asked Questions
What length is a 900mm door pull handle?
A 900mm door pull handle has an overall bar length of 900 mm (90 cm). Fixing centres, which is the distance between the two bolt holes, are typically 800 to 850 mm depending on the manufacturer. This size suits doors 2100 mm or taller and is common on entrance, pivot, and commercial-style residential doors.
Are 900mm pull handles suitable for external front doors?
Yes, provided the product is made from 316 stainless steel or has a PVD-coated finish rated for exterior exposure. Standard zinc alloy or electroplated finishes are suited to interior use only. For coastal or high-humidity locations, 316 stainless with a brushed or matte finish is the most durable option. Always check the manufacturer's exposure rating before fitting externally.
What is a back-to-back door pull handle?
A back-to-back pull handle is a set of two matching bar pulls mounted on opposite faces of a door, connected by threaded through-bolts that pass through the door thickness. They are used on entrance doors where you want the same handle appearance on both sides. They require a solid-core or solid-timber door for reliable fixing and suit door thicknesses of 35 to 55 mm in most standard sets.
Can I use a 900mm bar pull on a sliding door?
No. A projecting bar pull prevents a sliding door from travelling into its cavity or wall pocket. For sliding and barn doors, use a flush pull (recessed pull) instead. Flush pulls sit level with the door face and require a routed recess. Some 900mm flush bar pulls are available for wide sliding panels where a full-length grip is preferred.
What finishes are available in 900mm door pull handles?
Common finishes include matte black, brushed nickel, satin chrome, brushed brass, antique brass, and bright chrome. PVD-applied finishes on stainless steel are the most durable and chip-resistant. Matte black and brushed brass are the most requested currently. White powder coat is available in some ranges. Price ranges from around $80 to $350 depending on material, finish, and brand.
