Caroma Luna Mixers & Tapware

Caroma Luna mixers and tapware cover basin mixers, bath mixers and shower mixers built around the Luna range's rounded, softly curved handle design. The tapware is designed to be specified alongside Luna basins and baths for a visually consistent bathroom, though each piece also works as a standalone upgrade on an existing fitout.

Caroma Luna basin mixers

The Caroma Luna basin mixer is a single-lever design, meaning hot and cold are controlled through one lever rather than separate taps, which is the standard configuration for most Australian bathroom renovations now. Luna basin mixers are available in standard height and, on some models, a raised or extended height option, which matters for above-counter or vessel basins where a standard-height mixer wouldn't clear the rim of the basin bowl comfortably. Getting the height right at the specification stage avoids the awkward result of a mixer that's technically installed but sits too low to use properly.

Caroma Luna bath mixers and fillers

For baths, the Luna range includes both wall-mounted bath mixers and bath filler options, depending on whether the bath is positioned against a wall with tap holes available or is freestanding and needs a floor-mounted or deck-mounted filler instead. If you're pairing Luna tapware with a Caroma Luna freestanding bath, the filler position needs to be planned into the floor plumbing before tiling, since retrofitting a floor-mounted filler after the fact means lifting tiles.

Caroma Luna shower mixers

Luna shower mixers control temperature and flow for the shower and are typically specified alongside a separate shower head or rail, sold elsewhere in the Luna range. The mixer itself uses the same lever design language as the basin and bath mixers, so all three read as one coordinated set rather than tapware pieced together from different ranges.

Finishes across the range

Luna mixers and tapware are available in a spread of finishes, typically chrome as the standard option with additional finishes such as brushed nickel or matte black on select models. Chrome remains the easiest to match against other bathroom hardware and holds its resale value best, while the darker and brushed finishes suit a more considered, design-led bathroom where the tapware is meant to stand out rather than blend in.

Water efficiency and flow rate

Caroma Luna mixer taps carry WELS water efficiency ratings, with flow rates disclosed on the individual product specification sheet. This is worth checking against your state's water efficiency requirements if you're renovating under a building permit that specifies minimum WELS star ratings, which is increasingly common on new builds and major renovations across Australian states.

Choosing between Luna tapware pieces

Because Luna basin mixers, bath mixers and shower mixers all share the same handle profile, the main decision when specifying tapware for a Luna bathroom isn't about matching styles, it's about matching heights and mounting types to your specific fixtures. A vessel basin needs a taller mixer than an inset basin. A freestanding bath needs a floor or deck-mounted filler rather than a wall-mounted mixer. Checking these mounting and height details against your actual basin and bath models before ordering avoids a mismatch that only becomes obvious once the tapware arrives on site.

Installation and rough-in

Luna tapware follows standard Australian tap hole spacing and thread sizing, so installation is straightforward for a licensed plumber working from the product's rough-in dimensions. It's worth confirming tap hole centres against your chosen basin or bath before ordering, particularly if you're mixing a Luna mixer with a non-Luna basin, since spacing can vary slightly between manufacturers.

Frequently Asked Questions